| Author |
Topic: static |
randy
From:
shelbyville, illinois, usa
|
Posted 9 Sep 2004 9:49 am |
|
| My Nash 400 has static that sounds awful. Is it probably shot? |
|
|
 |
Bobby Rountree
From:
San Angelo, Texas, USA - R.I.P.
|
Posted 9 Sep 2004 11:12 am
|
|
Try Cleaning the Pre EQ jacks on the front of the amp....or jump them together with a guitar cord. If this solves the problem you acan plug & unplug a cord several times...if you have a good cleaner you might spray in the jack first. Also the Pwr Amp in jack on the back can cause the same problem. When all else fails Peavey has a very reasonable repair service with a fast turn-around. I have sent three different amps to them and the repairs were perfect and the price very reasonable. Good Luck
------------------
CarterS12-U, Truetone Pup, Nashville 1000, Dan Echo, Goodrich CD-2A
|
|
|
|
randy
From:
shelbyville, illinois, usa
|
Posted 9 Sep 2004 12:23 pm
|
|
| Thanks Bobby. I'll sure give that a try. I't's driving me crazy. We run out from my amp to the system at the shows and everyone says they can't hear it but I sure can and it makes me a little gunshy. |
|
|
|
