| Author |
Topic: Sho_Bud question |
GaryL
From:
Medina, OH USA
|
Posted 20 Jul 2004 12:51 pm |
|
| Did Sho-Bud ever manufacture steels with Formica covered bodies? |
|
|
 |
Eric West
From:
Portland, Oregon, USA, R.I.P.
|
Posted 20 Jul 2004 4:55 pm
|
|
| No. |
|
|
|
Chick Donner
From:
North Ridgeville, OH USA
|
Posted 21 Jul 2004 7:27 am
|
|
| Weeeeellllllll, maybe. Wasn't the ShoBUd Fender guitar formica covered?? |
|
|
|
Tommy Minniear
From:
Logansport, Indiana
|
Posted 21 Jul 2004 8:18 am
|
|
and,......lets not forget that beautiful finish on the later model Mavericks. (always reminded me of shelving paper).
I've never seen one. But, with all the experimenting that Sho~Bud did over the years, I wouldn't be suprised if one or two were made. Whether they "escaped" or not would have to be answered by someone who was around there at the time.
Interesting question. I'll bet Duane Marrs knows the answer.
------------------
Tommy Minniear
www.ntsga.com
[This message was edited by Tommy M on 21 July 2004 at 09:19 AM.] |
|
|
|
Ed Naylor
From:
portsmouth.ohio usa, R.I.P.
|
Posted 21 Jul 2004 9:30 am
|
|
| To my knowledge there was never one built. Ed Naylor Steel Guitar Works. |
|
|
|
Bill Ford
From:
Graniteville SC Aiken
|
|
|
|
Jerry Hayes
From:
Virginia Beach, Va.
|
Posted 21 Jul 2004 10:55 am
|
|
I wish I could remember his name but I can't. A while back I was watching the Grand Ole Opry and one of the major artists was appearing. When his steel player took a ride he was playing a formica covered steel with a ShoBud logo on the thing. I think he was wearing a ShoBud ball cap too. I don't believe it was a ShoBud though, it just looked like he'd put the decal on another brand of guitar. Does anyone else remember this? Have a good 'un, JH
------------------
Livin' in the Past and the Future with a 12 string Mooney Universal tuning.
|
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 21 Jul 2004 11:14 am
|
|
| If we are thinking of the same show, I am fairly certain that was a Mullen with a Sho-Bud decal. I noticed that the end plates on the guitar he was playing were angled in the front. |
|
|
|
Kenny Forbess
From:
peckerwood point, w. tn.
|
Posted 22 Jul 2004 11:34 am
|
|
If i'm not mistaken,
that was chad Udeen playing a Mullen with a Sho~Bud decal on the front of it.
Kenny
------------------
66 Emmons D-10 8&8
|
|
|
|
Bobbe Seymour
From:
Hendersonville TN USA, R.I.P.
|
Posted 22 Jul 2004 11:50 am
|
|
In 1985 when I bought the remainder of the Sho-Bud skunkworks, there were two experimental mica covered D-10 guitars in the batch. I sold one to Pete Howard in Nashville and I saw fit to destroy the other one. The mica one that I sold Mr. Howard now belongs to Larry Hinson here in Hendersonville. This guitar was used as a tone mule to see if mica actually would improve the sound/tone of the guitar.
bobbe
Since this post was made, this guitar has come back again into my posession, this guitar has a lot of stories, if it could only talk! [This message was edited by BobbeSeymour on 22 August 2004 at 07:49 PM.] |
|
|
|
Smiley Roberts
From:
Hendersonville,Tn. 37075
|
Posted 23 Jul 2004 1:27 am
|
|
Bobbe,
I think there was one more in the pile,a single neck cabinet. Remember....?? 
------------------
~ ~
©¿© It don't mean a thang,
mm if it ain't got that twang.
www.ntsga.com
[This message was edited by Smiley Roberts on 23 July 2004 at 08:06 AM.] |
|
|
|
John Bechtel
From:
Nashville, Tennessee, R.I.P.
|
Posted 23 Jul 2004 6:57 am
|
|
There were Two (2) Double-Neck Mica Sho-Buds built, including a Brown one and a Black one. One was built by Duane Marrs and one by Paul Franklin Sr.. How do I know? The Bible {P.F.Sr.} tells me so!  The powers to be chose not to persue the concept. The idea was to find out if the Mica-Base influenced the efficiency of the Aluminum-Neck. Apparently Mr. Sho-Bud was not impressed! What do you mean? (Who was Mr. Sho-Bud) 
------------------
“Big John” Bechtel
(2)-Fender ’49–’50 T–8 Customs
Fender ’65 Reissue Twin-Reverb Custom™ 15”
click here
click hereclick hereclick here |
|
|
|
Donna Sherrard Williams
From:
Louisville, Ky.
|
Posted 26 Jul 2004 3:13 pm
|
|
| I bet Boogie Sherrard knows the answer too if ole Duane doesnt ))))))))))))) |
|
|
|
Lem Smith
From:
Long Beach, MS
|
Posted 16 Aug 2004 8:13 pm
|
|
Yes, and as of the date of this posting, Bobbe has it listed for sale on his Steel Guitar Nashvile website. Built for Hal Rugg it says. Cool.
If it sells because of this posting, can I have a commission Bobbe? 
Lem[This message was edited by Lem Smith on 17 August 2004 at 01:04 AM.] |
|
|
|
Herman Visser
From:
Rohnert Park, California, USA
|
Posted 16 Aug 2004 11:01 pm
|
|
Hi Bill, Yes the Maverick in that pic. has a ever thin formica covering I have one.
|
|
|
|
Bob Knight
From:
Bowling Green KY
|
|
|
|
Duane Marrs
From:
Madison, Tennessee, USA
|
Posted 20 Aug 2004 11:03 am
|
|
| I have read the replys,concerning the formica Sho-Buds. Its been a long time, but to the best of my knowledge there was not over two or three mica Buds built. I do not remember a black mica Sho-Bud in the LDG model as Bob Knight posted. It could have been recovered, as one I built was in the Burl brown. And the other one a double neck in the brown. Hal Rugg was involved in the experiment, and may have played or tested out all of the mica guitars. Hal might remember better than myself. As for the later Mavricks, with the elm burl covering, this was not formica but rather a heavy plastic that was heat shrunk onto the cabinet. Formica is only a brand name such as Coke is to soft drinks. Many companys make a mica laminent which is a rigid material that is very difficult to bend and glue over rounded corners without proper heat to first shape it. Lots of steels have gone under the bridge since Sho-Bud,so don't start me lying. I can only give you what I remember as factual. Duane Marrs |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 20 Aug 2004 11:31 am
|
|
| Check the SGN site, you will see one of these elusive beasts in the flesh. |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 20 Aug 2004 11:35 am
|
|
| OOOPS!...disregard my previous post. I missed the post by Lem Smith relaying the same information. |
|
|
|
John Bechtel
From:
Nashville, Tennessee, R.I.P.
|
Posted 20 Aug 2004 6:25 pm
|
|
I don't recall either of the Mica Sho–Bud D–10's that I saw having any Aluminum-Trim on the Cabinet-Skirts. I saw a Black one and a Brown one on the Showroom-Floor on Broadway.
------------------
“Big John” Bechtel
(2)-Fender ’49–’50 T–8 Customs
Fender ’65 Reissue Twin-Reverb Custom™ 15”
click here
click hereclick hereclick here |
|
|
|
CrowBear Schmitt
From:
Ariege, - PairO'knees, - France
|
|
|
|
Bobbe Seymour
From:
Hendersonville TN USA, R.I.P.
|
Posted 22 Aug 2004 6:43 pm
|
|
Yes, since this thread started I bought this guitar back again, (for the third time in 15 years). We made some minor improvements that have greatly improved the tone. Things that were in the works when Shot Jackson demanded the return of the guitar because of folks seeing it and wanting Sho-Bud to "build them one".
Sho-Bud had no intentions to ever build a "Mica" guitar, this was only a tone mule for expermenting perposes only. What Eric West said was true, "NO". None were ever intended for sale. Had I not bought the Sho-Bud steel guitars and parts stock from David Jackson in December of '85, this guitar would also have been destroyed.
As you will notice, I have this guitar priced very fairly, this price is for the guitar value only and not the historical or heritage value.
Who ever gets this guitar will truly have a great piece of Sho-Bud history and a great guitar to play to boot.
Duane Marrs came by to see it and said it brought back some old memories. He remembered it and the Hal Rugg history well.
bobbe |
|
|
|
