Help Identify This Dobro?

Rick Abbott · From: Indiana, USA

A guy dropped this off to me to make it playable. I think I can do that, but I just wonder how old it is, or if anyone can tell me anything about the cone? I think the cone is in wrong...and nailed in...wow!

Here it is:

_________________
RICK ABBOTT
Sho~Bud D-10 Professional #7962
Remington T-8, Sehy #112
1975 Peavey Pacer

Howard Parker · From: Maryland

Serial number on headstock?
Any "Patent Pending" on coverplate?
Round or Square neck?

Is it old? Yep!

-edit- How's about a photo of back and sides.

h
_________________
Howard Parker

03\' Carter D-10
70\'s Dekley D-10
52\' Fender Custom
Many guitars by Paul Beard
Listowner Resoguit-L

Rick Abbott · From: Indiana, USA

I can't find a serial number anywhere. It is a square neck.

.
_________________
RICK ABBOTT
Sho~Bud D-10 Professional #7962
Remington T-8, Sehy #112
1975 Peavey Pacer

Howard Parker · From: Maryland

If that is Spruce top Mahogany back&sides I'll go out on a limb and say Model 45G circa 1930, California build.

I'm not the final word on this.

h

Rick Abbott · From: Indiana, USA

edit
_________________
RICK ABBOTT
Sho~Bud D-10 Professional #7962
Remington T-8, Sehy #112
1975 Peavey Pacer

Rick Abbott · From: Indiana, USA

That's what it is, Howard. I was just on Gruhn's and saw the possibility that this is that old!

Interesting
_________________
RICK ABBOTT
Sho~Bud D-10 Professional #7962
Remington T-8, Sehy #112
1975 Peavey Pacer

Howard Parker · From: Maryland

Lacking a serial number the common way to date the guitar is by woods and features.

Also checking the construction by ripping the guitar apart Very Happy

h

Rick Abbott · From: Indiana, USA

I'll be doing that in the morning, or early afternoon tomorrow.

What about the lack of SN? I cant find one.
_________________
RICK ABBOTT
Sho~Bud D-10 Professional #7962
Remington T-8, Sehy #112
1975 Peavey Pacer

Howard Parker · From: Maryland

If it's not on the end of the headstock there may be a dated part inside the guitar.

The lack of s/n is a bit unusual but certainly not rare. The Patent Pending coverplate puts it in the range of early-mid 1930s.

h

Andy Eder · From: North Florida, USA

Rick, Contact Calvin Minor or George at Gruhn Guitars. 615-256-2033.

Brian Evans · From: Nova Scotia, Canada

The lug cone and spider is pre-war Regal made Dobro, to me. The cones were indeed tacked in with two nails, at least mine was - and I was the first person to take the cone out from new, I know that for a fact. Solid headstock puts it late 1930's (1937 on) for me, Chicago made, as does the cover plate. The positioning of the spider on the lug cone is correct, the spider legs do not sit on the lugs. There were some "licensed" guitars made in the later 1930's that got the height of the cone rim wrong, hence the normal #14 spider (which is what you have) would not fit, so they made the lug cone and a short spider were the legs did fit on the lugs, and so the whole affair sat lower in the guitar, solved the problem.

It would be nice to see the soundwell and the neck bracing, if any. My 1936 Model 25 has the same spider and cone, same coverplate, but a dovetail neck and no soundwell.

Edit; Lack of serial number is very common in the mid-late 1930's Regal made Dobro's. I think I see four tail piece mounting screws and a fade mark on the top where the tail piece bars would have been, that means it had what I call a "bar" tailpiece and not the more typical stamped and arched fan tailpiece. Also it looks to be a deep body - Regal made bodies were 3 1/4" near the neck and 3 1/2" deep near the tail. California made bodies were 2 7/8" and 3 1/4".

Brian

Howard Parker · From: Maryland

To me the shape looks more California than Chicago.

Also, according to the Gruhn book, the Chicago 45 had a bound back while California also had a bound top.

Plenty of unknown variations. The Dobro history is full of surprises.

Oh..Pictures to Paul Beard might shed light. He knows a thing or three about vintage Dobros Laughing

h

Rick Abbott · From: Indiana, USA

Yes, it has the "bar" style tailpiece.

I can't wait to get home today and open it up. The cone has been out at least once. The nails are in new holes and there is evidence of removal.

I know it was in some guys basement for 30-40 years untouched. No, it does not smell bad, thankfully. The neck joint looks sound.
_________________
RICK ABBOTT
Sho~Bud D-10 Professional #7962
Remington T-8, Sehy #112
1975 Peavey Pacer

Brian Evans · From: Nova Scotia, Canada

this is cut and paste from the excellent Randy Getz article on the history of the pre-war Dobro. I only have it as a word document, I lost the link.

PEGHEADS

All pegheads on California-built guitars were slotted. On early models (until about 1934), the slots were cut with a special saw, which produced a squared-end in the slot. Upon merger with National and the subsequent move to a single building, this saw became misplaced (or discarded) and from that time all California-built guitars had routed slots which penetrated the peghead at an angle and had rounded ends. Regal-produced guitars also had routed slots. These slots, however, were slightly wider than those on California-built guitars and went straight through the peghead. They are, therefore, easily identifiable. The solid peghead did not appear until late in 1937, by which time all final production had been shifted to Chicago. Solid pegheads appear to have only been used on Chicago-built, Model 37 and Model 45 guitars. Many solid pegheads had sleeves where the tuning post penetrated the peghead, while others were produced without these sleeves

Another bit on the tail piece confirms that only Regal made instruments had the bar, or trapeze tail piece.

Another bit confirms that the three little round holes were beveled on the CA made guitars, and have square edges on the Regal made instruments.

So you most likely have a Model 37 or a Model 45. If the binding is single ply, it is a model 37, if the binding is three ply it's a model 45, per Getz. It may have been refinished, but the Model 45 had a natural finish three ply top, with the top ply spruce, and I would say yours looks exactly like that. Model 45 with solid peghead were built in Chicago from late 1937 to end of production in 1941.

Fun to explore this stuff, I enjoyed the hunt!

Edit: I see in the first picture that the top binding is three ply, I think we have a winner!

Brian

Howard Parker · From: Maryland

Thanks Brian.

I forgot about Randy's article.

I'm thinking you are accurate!

h

Brian Evans · From: Nova Scotia, Canada

Howard, when I got my pre-war dobro I totally went to town trying to learn what it was and when it was made. It turns out to be a Chicago made by Regal Dobro Model 25 or 27 made from 1935 to around 1937, round neck. I find this stuff far too fascinating.

Brian

Howard Parker · From: Maryland

I also find the history entertaining..and perplexing at times.

The company was not a slave to good business practices Very Happy

h

Mark Eaton · Posted 30 Jul 2015 8:24 am

This guitar appears to be an early Regal built Model 45 from around 1933-1935. But - there were some square shoulder Regal built 45s in the late '30s, but by then it seems many of the guitars had spun cones as opposed to lug cone.

- The "square shoulders" are typically a transition from the Calif. built Dobros to the Chicago built Regals.

- the lack of a serial number is typically a "Regal thing" as is the solid headstock.

- the lug cone doesn't automatically make it a Regal, I have an early '30s Calif. built Dobro with a lug cone.

Kudos to Randy Getz for his fine article which has been of great use over the years, but I obtained some of my information beginning on page 120 of Steve Toth's excellent Dobro Roots: A Photo Tour of Prewar Wood Body Dobros which was published in 2014. Anyone with an interest in old Dobros will enjoy this book.

First time I've been able to use this phrase in awhile: another example of the convoluted history of the Dobro.

But Steve's book has made things less convoluted than they used to be.

_________________
Mark

Mark Eaton · Posted 30 Jul 2015 8:27 am

Rick Abbott · From: Indiana, USA

WOW! This is pretty overwhelming. I will take the cone out this afternoon to get photos of the interior.

I see there is a debate about the 1933-35 vs 1937-41 age range. Anyone want to continue the debate? Will internal pics help?

Now I want to keep it...but it's not for sale. Oh Well

_________________
RICK ABBOTT
Sho~Bud D-10 Professional #7962
Remington T-8, Sehy #112
1975 Peavey Pacer

Rick Abbott · From: Indiana, USA

Single binding on the back. Center strip on back is 5-ply WBWBW looks like maple and maybe ebonized maple.
Top is W-outer BWB wood-inner binding.

_________________
RICK ABBOTT
Sho~Bud D-10 Professional #7962
Remington T-8, Sehy #112
1975 Peavey Pacer

Howard Parker · From: Maryland

I don't think we're debating.

The history of Dobro/Regal is wacky. Very Happy

Strange stuff crops up from time to time. Sometimes you reach a consensus. Sometimes you wonder what the Dopyera's were thinking.

h

Howard Parker · From: Maryland

I like the new photos. Looks like reasonable condition. Typical rough soundwell & cone shelf.

Neck stick attachment typical of the "better" models.

That's a nice Dobro.

h

-edit- With a flashlight take a peak behind the soundwell and search for hand written markings/dates.

Rick Abbott · From: Indiana, USA

Howard Parker · From: Maryland

There are a bunch of commercially available sets. Most are similar (give or take) to:

D - .017
B - .020
G - .028w
D - .035w
B - .045w
G - .056w

Phosphor bronze wounds are still the most popular.

Forum Index > Steel Without Pedals	Goto page 1, 2 Next	Next oldest topic :: Next newest topic