| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Stage One volume pedal
Reply to topic
Author Topic:  Stage One volume pedal
Steve Perry


From:
Elizabethtown Ky, USA
Post  Posted 30 May 2015 3:10 pm    
Reply with quote

I'm a new steel player. I started a year and a half ago when I got my new Zum Encore along with the Stage One volume pedal. I'm just now getting to the point where I'm trying to use the pedal for something more than a foot rest. Very Happy The problem I'm running into is that the pedal action feels kind of notchy and it seems like there's a point about halfway through the travel where the volume makes a large jump. I'm just wondering if pedals like the Goodrich and others operate similarly or is this something peculiar to the Stage One?
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 30 May 2015 3:59 pm    
Reply with quote

If it's a string-controlled pedal (I can't remember whether it has a gear instead), look to see that it doesn't wrap over itself.
Also, if it doesn't attach with a bracket, I've had it catch on the pedal bar, if it's too close.
Put the pedal on your lap and operate by hand. If problem exists in your lap, contact Doug, he does good customer service. They shouldn't do that.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects


Last edited by Lane Gray on 1 Jun 2015 6:04 am; edited 1 time in total
View user's profile Send private message Send e-mail Yahoo Messenger
Scott Duckworth


From:
Etowah, TN Western Foothills of the Smokies
Post  Posted 30 May 2015 5:14 pm    
Reply with quote

I could be just having to get used to an audio taper potentiometer. I still think linear taper would be better.

Audio taper has it's most boost after the halfway point.
_________________
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it

I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
View user's profile Send private message Send e-mail Visit poster's website
John Booth


From:
Columbus Ohio, USA
Post  Posted 30 May 2015 5:43 pm    
Reply with quote

So does a linear taper potentiometer increase the volume more smoothly?
If so, can I put one in any pot volume pedal?
Thanks
JB
_________________
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
..................................
View user's profile Send private message Send e-mail
Jim Bob Sedgwick

 

From:
Clinton, Missouri USA
Post  Posted 30 May 2015 6:26 pm    
Reply with quote

I would advise against using a linear taper. You barely move the pedal and it goes from off to wide open. Not good for a volume pedal.
View user's profile Send private message
John Booth


From:
Columbus Ohio, USA
Post  Posted 30 May 2015 6:41 pm    
Reply with quote

Thanks Jim,
I use an Emmons pot pedal and about halfway it really leaps up in volume.
What would you suggest?
JB
_________________
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
..................................
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 30 May 2015 9:58 pm    
Reply with quote

Read his post. It FEELS notchy.
If you feel it in the foot, the taper isn't an issue.
A linear taper in a volume application is a little weird sounding.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
John Booth


From:
Columbus Ohio, USA
Post  Posted 31 May 2015 4:59 am    
Reply with quote

I got that, but I'm not "feeling" anything like a string wrapping over itself or anything, Mine responds more
like the red line in this graph



where I would prefer that it respond more like the blue or even the green line in this graph.

Do I just have a $hi##y pot or something?
Wish I could afford one of those Telonics multi-taper jobs.
Thanks guys,
JB
_________________
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
..................................
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 31 May 2015 5:11 am    
Reply with quote

Due to psychoacoustics, a green line will SOUND like the magenta line. And if you want to HEAR the green line, you'll want the blue.
You could try a linear pot, I'd suspect you wouldn't like it, so get one from Radio Shack. You MIGHT just have a bum pot, it would fail to surprise me that quality control has slipped.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
John Booth


From:
Columbus Ohio, USA
Post  Posted 31 May 2015 5:14 am    
Reply with quote

psychoacoustics?

Hmmm... Guess I getter get on Google Whoa!
_________________
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
..................................
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 31 May 2015 5:17 am    
Reply with quote

Means hearing is more brain than ears. That's all.
If you like reading, check out "This Is Your Brain On Music.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Ray Thomas

 

From:
Goldsboro North Carolina
Post  Posted 31 May 2015 6:04 am     Info
Reply with quote

Hilton
_________________
Ray Thomas
Livesteel Strings Dealer
Call 919-920-5482
Text rayssteel@gmail.com or email
View user's profile Send private message Send e-mail
John Booth


From:
Columbus Ohio, USA
Post  Posted 31 May 2015 6:53 am    
Reply with quote

Hilton or Telonics = $ this ole boy can't spare right now. BUT if I could, which do you'se guys think is better and why?
Thanks,
JB
_________________
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
..................................
View user's profile Send private message Send e-mail
chris ivey


From:
california (deceased)
Post  Posted 31 May 2015 8:02 am    
Reply with quote

start a new thread.
View user's profile Send private message
Carl Kilmer


From:
East Central, Illinois
Post  Posted 31 May 2015 8:04 am    
Reply with quote

Hilton! It's affordable, and the best I've ever had. I've had plenty.
I have 2 of them and would never own anything else. Very Happy Very Happy Very Happy
_________________
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal
View user's profile Send private message Send e-mail
Michael Coggins


From:
Sligo, Ireland
Post  Posted 31 May 2015 9:57 am     Re: Stage One volume pedal
Reply with quote

Steve Perry wrote:
I'm a new steel player. I started a year and a half ago when I got my new Zum Encore along with the Stage One volume pedal. I'm just now getting to the point where I'm trying to use the pedal for something more than a foot rest. Very Happy The problem I'm running into is that the pedal action feels kind of notchy and it seems like there's a point about halfway through the travel where the volume makes a large jump. I'm just wondering if pedals like the Goodrich and others operate similarly or is this something peculiar to the Stage One?


Steve, I too have a Zum Encore and a Stage One volume pedal!
When I first got the pedal I found the gear drive a little bit too stiff for my liking, so I adjusted the tension until I got better "feel".
The travel from low volume to fully on is very smooth on my pedal. I would take a look at the gearing and make sure it is clean and dust free. It may be a faulty pot of course, which I'm sure Doug can replace for you.

As a nubie also (2 years in), I think the smooth operating of the volume pedal with the right side knee levers is one of the most difficult things to do on the PSG.
_________________
Mullen Royal Precision SD10, 2002 Fender Telecaster, Alden Mandocaster, Boss Katana 100-212, Stage One V/P, Tom Bradshaw Resonator Pedal. Wampler Paisley Drive, Wampler Ego Compressor, Boss Super Chorus, Simble Overdrive.
View user's profile Send private message Send e-mail
Mike Archer


From:
church hill tn
Post  Posted 31 May 2015 11:55 am     i have
Reply with quote

I have a telonics pedal its awesome

I also just a week back got a Hilton it also is awesome


to tell you the truth they sound about the same

on the setting I have on the telonics right now

you would do well with either but bare this in mind for some reason chimes are easier to do
with a pot pedal and Paul still uses a pot pedal..
for that reason according to his video
I to have found this to be true
mike Very Happy
_________________
Mullen g2 d-10
Quilter 112
Tele/ fender deluxe
View user's profile Send private message Send e-mail
Georg Sørtun


From:
Mandal, Agder, Norway
Post  Posted 31 May 2015 10:16 pm    
Reply with quote

I will mention that IF a buffer-amp is used (before the VP of course), a linear pot can be made to operate as a logarithmic pot by adding a resistor, of about half the value of the pot itself, between center-connection and GND.

Pretty much any curve one wants can be had by adding the right resistor-value(s) the right way - between center and either of the two other connectors. But, the VP will of course then get an overall lower resistance, so a buffer is needed to prevent severe "tone-suck" Smile
View user's profile Send private message Send e-mail Visit poster's website
Jerry Roller


From:
Van Buren, Arkansas USA
Post  Posted 31 May 2015 11:10 pm    
Reply with quote

I recently replaced a pot for a customer who had just had a new pot put in his pedal. I found that the pulley was mounted in such a position that the pulley allen screw struck the "top" of the pedal casting as it rotated which caused a very distinct catch and when it got past that point and released it naturally jumped in volume. I went ahead and replaced the pot and sent his "old" new one back to him with the pedal. Watch out for those set screws which I don't know if the Stage One has that long screw extending out of the pulley or not.
Jerry
_________________
http://www.littleoprey.org/
View user's profile Send private message Visit poster's website
Doug Earnest


From:
Branson, MO USA
Post  Posted 1 Jun 2015 4:56 am    
Reply with quote

Steve, check your email. I'll fix your pedal.
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 1 Jun 2015 6:03 am    
Reply with quote

What did I say way back up in the first post?
Well done, Doug.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Keith Hilton

 

From:
248 Laurel Road Ozark, Missouri 65721
Post  Posted 1 Jun 2015 1:07 pm    
Reply with quote

Doug is a friend of mine, he will help you. Doug is an all around good person.
View user's profile Send private message Send e-mail Visit poster's website
Steve Perry


From:
Elizabethtown Ky, USA
Post  Posted 2 Jun 2015 6:41 am    
Reply with quote

Thanks, Doug and everyone else. Embarassingly, in hindsight, I should have taken this up privately with Doug in the first place. I started this post not as a complaint, but just trying to find out if what I was experiencing was normal or not. As you can see above, Doug has offered to fix the pedal and as soon as I can line up a box, it will be off to him.
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 2 Jun 2015 1:24 pm    
Reply with quote

You could try Michael's idea of adjusting the tension?
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron