| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic where do you rest your hand and wrist
Reply to topic
Author Topic:  where do you rest your hand and wrist
Terry Sneed

 

From:
Arkansas,
Post  Posted 15 Jun 2004 6:13 pm    
Reply with quote

if you play a D10, where do you rest your hand on E9 and your arm on C6? just want to see if most players rest their hand and arm bascially in the same position.

------------------
84 SKH Emmons Legrand D10
session 400'rd Steelin for my Lord.


View user's profile Send private message Send e-mail
Ray Montee


From:
Portland, Oregon (deceased)
Post  Posted 16 Jun 2004 6:11 pm    
Reply with quote

Are you really supposed to "rest your hand and/or arm" by allowing it to lie atop a bank of strings or pickup cover?

My right hand, the heel portion, resting lightly on the strings is what I do. I move it right or left as required.
View user's profile Send private message Send e-mail Visit poster's website
Ron Randall

 

From:
Dallas, Texas, USA
Post  Posted 16 Jun 2004 7:21 pm    
Reply with quote

I don't rest my hand or arm while playing. The hand just hovers. While not playing, the heel of my right hand rests lightly around strings 8,9,10.
ain't that weird?
View user's profile Send private message Send e-mail
Sidney Malone

 

From:
Buna, TX
Post  Posted 16 Jun 2004 8:11 pm    
Reply with quote

Well I've got a slight groove in one of my pickups caused by the 12th string and a bad habit of resting/anchoring my right hand. A very good reminder of poor technique as a beginner!!

I agree that neither hand or arm should be rested anywhere unless your not playing. It can cause you to have the wrong pick angle while moving across the strings as well as slow bar movement with the left hand.



------------------
Fessy S-12U, Future MSA Millennium S-12U, Stereo Steel


View user's profile Send private message Send e-mail
Terry Sneed

 

From:
Arkansas,
Post  Posted 17 Jun 2004 6:17 am    
Reply with quote

well, maybe a better word would have been position your hand/arm.

------------------
84 SKH Emmons Legrand D10
session 400'rd Steelin for my Lord.


View user's profile Send private message Send e-mail
David Doggett


From:
Bawl'mer, MD (formerly of MS, Nawluns, Gnashville, Knocksville, Lost Angeles, Bahsten. and Philly)
Post  Posted 17 Jun 2004 7:50 am    
Reply with quote

For the richest harmonics in your tone, you want to be picking just over an octave above where your bar is. If you are at exactly an octave, the harmonics can be so strong as to be a little distracting. Because the frets are so close together, if you pick around the 18th fret, you will be close enough to the octave to get good rich tone for most bar positions in the first octave of the fretboard. If you have your bar above the 12th fret, you will need to move your picking back accordingly. Of course, if you want cleaner tone without the rich overtones, you need to back your picking off closer to the changer. And if you want a lot of bite on your low strings, you can pick very near the changer. So it depends.

Although it might be poor form on a 10-string, on a 12-string resting your palm heel on the lowest strings may be good form. It keeps them from resonating and causing bar noise. I find I do that naturally, and notice that Joe Wright does too, so it can't be all that bad.

[This message was edited by David Doggett on 17 June 2004 at 08:52 AM.]

View user's profile Send private message Send e-mail
Ricky Littleton


From:
Steely-Eyed Missile Man from Cocoa Beach, Florida USA
Post  Posted 17 Jun 2004 10:08 am    
Reply with quote

My forearm rests on the C6 neck, but I keep a guitar cloth over the strings to keep oils and acids off them. I have a little piece of velcro on the front edge of the C6 neck and that holds my cloth in place over the strings, changer and pickup.

My right hand "hovers" over the strings of the neck I'm playing, so there's no contact other than my picks unless I happen to be palm or "pinky" blocking.

Then, that's just me...

------------------
Emmons LeGrande - 8x4
Session 400 Ltd
Dan-Echo, E-Bow, Ibanez Distortion, Boss Comp./Sustain, Ibanez Auto-Wah, PX4 Pandoras Box

View user's profile Send private message Send e-mail Visit poster's website
Colm Chomicky


From:
Kansas, (Prairie Village)
Post  Posted 17 Jun 2004 5:08 pm    
Reply with quote

I notice that my wrist seems to rest on the C6th. Maybe thats partly a function of guitar construction on how close the necks are. I don't know if the way I rest my wrist is good form. All I know about good form is it seems that the easy way to do things is probably bad form Does any one let their whole arm hover?
View user's profile Send private message Send e-mail Visit poster's website
Robert Porri

 

From:
Windsor, Connecticut, USA
Post  Posted 17 Jun 2004 8:36 pm    
Reply with quote

question - The purpose of a pad is to rest on it while you play- correct? Seeing I have a pad and have been learning this way I'm curious if there are many stong opinions that you shouldn't rest at all. I use a Carter Starter in my lessons, and don't rest on it and never thought the transition awkward either.

Bob P.
View user's profile Send private message Send e-mail
Jim Ives


From:
Los Angeles, California, USA
Post  Posted 18 Jun 2004 11:12 am    
Reply with quote

I use a terrycloth wrist band on my right wrist which I then let rest on the C6 neck. These wrist bands can be obtained in the tennis supply section of any sporting goods store for about $4.00 each.

------------------
Mullen D-10
Sho-Bud Pro II D-10
Boss RV3
Fulltone Full-Drive II
Evans FET 500
Peavey Nashville 1000
Vox wah-wah pedal



View user's profile Send private message Send e-mail
Terry Sneed

 

From:
Arkansas,
Post  Posted 18 Jun 2004 12:14 pm    
Reply with quote

Robert, the way I see it there would be no need for makin SD-10's if we wadn't supposed to rest our arm on the pad. I'm like you, I thought that's what they were for. I rest my arm on C6 right over the pickup. I position my pick hand right below the pickup on E9, where I can see most of the pickup. I'll have to try one of those wrist straps.

------------------
84 SKH Emmons Legrand D10
session 400'rd Steelin for my Lord.


View user's profile Send private message Send e-mail
Ray Minich

 

From:
Bradford, Pa. Frozen Tundra
Post  Posted 18 Jun 2004 12:57 pm    
Reply with quote

Startin' out on a 6 string lap steel, then later a 6 string Supro on legs, there was no place to rest anything. I guess the habit or method of keeping the arms in the air carries forward.
View user's profile Send private message Send e-mail
David Doggett


From:
Bawl'mer, MD (formerly of MS, Nawluns, Gnashville, Knocksville, Lost Angeles, Bahsten. and Philly)
Post  Posted 18 Jun 2004 1:10 pm    
Reply with quote

It comes down to what you are comfortable with. There are top pros who play SD with a rest, and top pros who don't. I rest the heel of my picking hand lightly on the lower strings of my S12U, but I find the pad on a SD is just in the way and henders my mobility. The C6 neck of a D10 is also a little in the way, but the strings are slicker than the pad, and are situated lower. I started on piano where a great deal of attention is payed to proper hand and arm positions. So from that standpoint, the idea of having a big wide thick sticky pad between me and the playing surface of the instrument just seems really wrong.
View user's profile Send private message Send e-mail
Colm Chomicky


From:
Kansas, (Prairie Village)
Post  Posted 18 Jun 2004 4:18 pm    
Reply with quote

Given the piano example and some other posts, seems like there is one school of thought indicating that wrist or arm wresting might not be the best form.

I myself (a rank amateur) pretty much rest my wrist on the C6th strings when playing the E9th. With the C6th lower, it does put a bend in the wrist that might cause some folks problems?

Just like typing with wrists bent is not good for carpal tunnel, etc. maybe that applies to steel. Ergonomics. I use lousy ergonomics.

With all the other things to think about when playing, if a fella were trying to change a habit, sounds like one way to teach your wrist or arm not to do too much resting is to buy an LDG and replace the pad with a bed of nails?

PS does anyone know if any instructional videos, maybe Jeff Newman's Right Hand Alpha, etc address say wrist angle ?

[This message was edited by Colm Chomicky on 18 June 2004 at 05:25 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Terry Sneed

 

From:
Arkansas,
Post  Posted 21 Jun 2004 12:42 pm    
Reply with quote

why would sombody buy an SD-10 if they were not goin to rest their arm on the pad? why not just buy an S-10? their cheaper anyway.
yes, I rest my arm on the pad when playin an SD-10 and on the strings of a D-10. maybe that's why I still play like a beginner.

------------------
84 SKH Emmons Legrand D10
session 400'rd Steelin for my Lord.


View user's profile Send private message Send e-mail
Ray Minich

 

From:
Bradford, Pa. Frozen Tundra
Post  Posted 21 Jun 2004 12:50 pm    
Reply with quote

I lied but it was unintentional, I checked myself for this behavior this weekend and, of course, I cheated. Turns out I rest my wrists on the pad SOMETIMES...
View user's profile Send private message Send e-mail
Dave Burr

 

From:
League City, TX
Post  Posted 21 Jun 2004 1:28 pm    
Reply with quote

THE main man is resting his arm in this picture, so I don't see why I can't... Winking http://www.buddyemmons.com/NRMJ3902.htm

Respectfully,
Dave Burr
View user's profile Send private message Send e-mail
Lincoln Goertzen

 

From:
Taylor, British Columbia, Canada
Post  Posted 24 Jun 2004 8:02 pm    
Reply with quote

I figure, if it sounds good, do it! I rest my right hand/arm on my C6th neck (gotta use it for something, just kidding) and TRY not to rest my left hand/arm while I'm playing. But that's if I'm not tired, or if I'm really concerned that my lick sound "fluid".

Just do whatever feels natural AND sounds the way it should. If your playing sounds choppy, then that is the first thing I would check.

Lincoln
View user's profile Send private message Send e-mail
Robert Porri

 

From:
Windsor, Connecticut, USA
Post  Posted 24 Jun 2004 8:18 pm    
Reply with quote

Colm,

I have one Jeff Newman video so far, Pedal Steel Guitar Techniques Part One & Two (both are on one DVD). Part 1 goes fairly well into right hand angle. No resting was mentioned, but as far as angle, he talks about a pyramid sort of shape with the large knuckle at the top. At least at the point he did this video, he talked against what he called the "claw"(I think that's what he called it) type of hand parallel to the strings position but also said a lot of players use it. Given other things I've heard him say, I think he was more open to different approaches than he sometimes let on. But, I'm new, know almost nothing, and I'm just developing ideas based on what everyone says and what I experience. The basic answer to your question is yes, Jeff Newman covers it in his instructional material. Probably also in the one you mentioned.

Bob P.
View user's profile Send private message Send e-mail
Jim Smith


From:
Midlothian, TX, USA
Post  Posted 24 Jun 2004 8:21 pm    
Reply with quote

But Jeff only played single neck guitars in his videos.
View user's profile Send private message Send e-mail
Robert Porri

 

From:
Windsor, Connecticut, USA
Post  Posted 24 Jun 2004 8:38 pm    
Reply with quote

Yeah Jim. I was just responding to Colm's question about whether angle is discussed on any of Jeff Newman's videos. I do use my pad and I try to keep the angle Jeff Newman talks about also. I sure wish he was still with us so he could someday tell me that I'm doing it all wrong.

Bob P.
View user's profile Send private message Send e-mail
Colm Chomicky


From:
Kansas, (Prairie Village)
Post  Posted 25 Jun 2004 2:45 pm    
Reply with quote

Robert,
Thanks, for the info. Sounds like Jeff's video's are pretty informative.
View user's profile Send private message Send e-mail Visit poster's website
kbdrost


From:
Prospect Heights, IL
Post  Posted 26 Jun 2004 4:47 pm    
Reply with quote

I just realized that for 20-plus years I've had my right forearm firmly anchored to my C6 neck when I play E9. After reading this post, I tried letting my right arm "hover." To me, it feels almost like I'm doing a lateral raise with my right shoulder. The forearm still touches the strings, but it doesn't rest on them. I couldn't believe the results. I was much faster and cleaner in my picking. It was so much easier to grab different string combinations across the entire width of the neck. My blocking was better, and my speed picking sounded like the second coming of Paul Franklin (NOT!) No wonder I always seemed to play better on the C neck. I've had several teachers over the years, and none of them pointed out this problem. They had to invent the internet before I could learn how to play. Thanks for the help, guys.

BTW, Jim, I also use the terrycloth wrist band. I like the double wide model. It's really cool if you can get them with the logo of local sports teams. I thought I invented that trick. Another misconception crushed by the internet.

------------------
Ken Drost
steelcrazy after all these years
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron