| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Tenderly (What a cool song!)
Reply to topic
Author Topic:  Tenderly (What a cool song!)
Nate Hofer


From:
Overland Park, Kansas
Post  Posted 12 Apr 2015 8:18 pm    
Reply with quote

Tenderly seems to be a lap steel standard and I had written it off as until I heard Mikiya Matsuda's version which inspired me to get more familiar with it (something about the chord voicings he uses).

And it's interesting to me to see the variations out there:
    • Mikiya told me he uses an A6/F#7 variation (so I assume that's what he's using on his)
    • Mike Neer has a B11 version with string pulls of the Noel Boggs version (wondering if that's how Boggs did it?)
    • Doug Beaumier has a C6 version

I approached it in C6/A7 and I'm sorta proud of myself that I picked up this arrangement by ear. Not typical for me.
I would be super-interested to hear any feedback from the forum! Especially constructive criticism on chord voicings!

https://youtu.be/B5Ciy7aBwj8
Enjoy the flubs!
View user's profile Send private message Send e-mail Visit poster's website
Doug Beaumier


From:
Northampton, MA
Post  Posted 12 Apr 2015 8:37 pm    
Reply with quote

Nice job, Nate. I like the chord voicings you're using, and it's great that you were able to get the chords by ear.

Tenderly was originally written in 3/4 time, and somewhere along the way jazz players started playing it in 4/4. So now some books have it in 3/4 and some in 4/4. I play it in 3/4 because that's how I learned it, off a Curly Chalker record.
_________________
My Site / My YouTube Channel
25 Songs C6 Lap Steel / 25 MORE Songs C6 Lap Steel / 16 Songs, C6, A6, B11 / 60 Popular Melodies E9 Pedal Steel


Last edited by Doug Beaumier on 13 Apr 2015 3:58 pm; edited 2 times in total
View user's profile Send private message Send e-mail Visit poster's website
Ken Campbell

 

From:
Ferndale, Montana
Post  Posted 12 Apr 2015 9:16 pm    
Reply with quote

Rose's version is awesome too....
View user's profile Send private message Send e-mail
Mikiya Matsuda


From:
San Francisco, California, USA
Post  Posted 12 Apr 2015 10:37 pm    
Reply with quote

Nice work, Nate. I think by virtue of using similar tunings, we're naturally gravitating towards some of the same voicings. I haven't tried it, but Tenderly would probably work well on E13.

Aside from Boggs' arrangements, here two of my other favorite steel recordings of the tune--both live. One in 4/4 and the other in 3/4. They're not non-pedal, but while we're on the topic...

Curly Chalker - https://www.dropbox.com/s/kgwlrmne5k01fz5/07%20Tenderly%20%28Chalker%29.mp3?dl=0

Rico Turchetti - https://www.dropbox.com/s/olvvc4gc1x5gob2/07%20Tenderly%20%28Turchetti%29.mp3?dl=0
_________________
www.mikiyamatsuda.com
www.alcatrazislanders.com
View user's profile Send private message Send e-mail Visit poster's website
Nate Hofer


From:
Overland Park, Kansas
Post  Posted 13 Apr 2015 5:47 am    
Reply with quote

Thank you, Doug and Mikiya! To be clear, I did consult fake books to steer me however I did ultimately write my own chart based upon particular chords voicings I liked and had to figure out how to approach those inversions. (Minor 9s sound so sweet and mid-century!) No tab consulting however.

Mikiya, pedals or not, those are two incredible versions. I had not heard a 3/4 arrangement yet. And the Curly Chalker version is just so cool. He's definitely a local legend here in the Kansas and Missouri area. I'll keep those on tap. Thank you. Any idea what years those are? 1950s or 60s?

Now to work out a cleaner version, solo section, and better ending.
View user's profile Send private message Send e-mail Visit poster's website
Jonathan Lam

 

From:
Brooklyn, NY
Post  Posted 13 Apr 2015 5:58 am    
Reply with quote

You need a smaller chair. Nice job
_________________
Http://www.jonnylam.com
http://www.honeyfingersmusic.com
https://www.facebook.com/honeyfingersmusic
View user's profile Send private message Send e-mail Visit poster's website
Andy Volk


From:
Boston, MA
Post  Posted 13 Apr 2015 9:46 am    
Reply with quote

Great start, Nate. That tune sounds great on steel.

Thanks for the Curly and Ricco downloads, Mikaya. There are a couple of favorites versions of mine too ... by Barney Kessel and Oscar Peterson.

One of the most memorable was by Joe Venuti who would play the melody, oozing with feeling and vibrato, and then, we he got to the right place in the music, would shout out ... "Tenderly!"
_________________
Steel Guitar Books! Website: www.volkmediabooks.com
View user's profile Send private message Send e-mail Visit poster's website
Jerry Berger


From:
Nampa, Idaho USA
Post  Posted 13 Apr 2015 5:11 pm    
Reply with quote

I also like Santo & Johnny's verson of "Tenderly."

https://www.youtube.com/watch?v=A6K0hkOipq4&list=RDA6K0hkOipq4#t=24


Last edited by Jerry Berger on 18 Apr 2015 12:09 pm; edited 1 time in total
View user's profile Send private message Send e-mail
Todd Clinesmith


From:
Lone Rock Free State Oregon
Post  Posted 14 Apr 2015 9:41 am    
Reply with quote

Nice Chords, and timing Nate. I have been revisiting this tune recently as well.

Todd
View user's profile Send private message Send e-mail Visit poster's website
Peter den Hartogh


From:
Cape Town, South Africa
Post  Posted 18 Apr 2015 6:07 am    
Reply with quote

Here is a 3/4 arrangement by Nat King Cole 1954.
https://www.youtube.com/watch?v=TKXEsi6O-XA
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron