| Author |
Topic: D8 Console KIT Mahogany Wood - GeorgeBoards Price Increase< |
George Piburn
From:
The Land of Enchantment New Mexico
|
Posted 25 Mar 2015 7:33 am |
|
Hello forumites, Here is a African Ribbon Mahogany Wood Console KIT
with Control Cover with Mahogany veneer.
The Front Neck has a lifter Board of matching Mahogany 3/4" thickness.
$946.00 usd + Shipping.
See Post Below for Labor and Parts Additions to the Kit as Is 3-29-2015 -
4-5-2015 We added more labor -- I've Sanded and applied multi layers of ZPoxy Grain Filler and Sealer.
4-5-2015 I've Made the VGrooves in the Nuts for both Necks.
We have Now Done all of the Critical Work for you
Bonded the Lifter and trimmed to fit -- No Charge
We always run these blanks past the Forum as a courtesy in case any one wants a super deal for a DIY Project.
As time moves along I start to build them out , and the price goes up according to how much gets done.
Details :
Includes control plate with Volume - Tone pot holes and holes for 4 switches , 2 for split pickups 2 for pickup to output.
24.5 Scale length , (can be 25 if you want)
I have several parts all priced separately
A pair of 24.5 Non Glare Fretboards $35.00 each
Set up for Alumitone 3.5 Bars -- we are Lace OEM Dealers $110.00 each - many other PuPs will fit the pocket
Brass Nut and Bridges $40.00 each piece - $55.00 with Nickel plate each piece (4 pieces total for 2 necks)
Hand Notched with my Spacing fixtures $5.00 per notch Nut were Added V Grooved - 4- 2015
High Quality Chrome Tuners with Black Buttons $10.00 per tuner
Chrome Top Ferrules for String Through $1.00 each
All of the Control Pots - Knobs - 151 switchcraft OutPut Jack $50.00 for all
Legs and Sockets - $25.00 per socket Installed
Additional Labor Services Available:
Holes for Leg Sockets (4 recommended)$5.00 per hole Added Drilled - 4- 2015
Tuner Holes Drilled $5.00 per hole Added Drilled - 4- 2015
String Through Holes Drilled $5.00 per hole Added Drilled - 4- 2015
Output Jack hole Drilled $5.00 per hole Added Drilled - 4- 2015
Wireing Holes for Pickups joining the necks Drilled $25.00 for all Added Drilled - 4- 2015
Pre Set Nut and Bridge with my professional Fixture jig $40.00 for both Necks Added Drilled - 4- 2015
Various ways to Join the Necks
Zpoxy Filled and Sanded Ready for Lacquer
VGrooved Nuts
_________________
GeorgeBoards S8 Non Pedal Steel Guitar Instruments
Maker of One of a Kind Works of Art that play music too.
Instructional DVDs
YouTube Channel
Last edited by George Piburn on 6 Apr 2015 7:50 am; edited 4 times in total |
|
|
 |
Dustin Rhodes
From:
Owasso OK
|
Posted 25 Mar 2015 8:21 am
|
|
| Do you ever do 10 string necks? |
|
|
|
George Piburn
From:
The Land of Enchantment New Mexico
|
Posted 25 Mar 2015 8:40 am 10 string Necks
|
|
We have a 10 string Head Stock Router Template for DIY Folks
To make a 10 Model is a greater consideration as these are all CAD - CNC creations. The Up Front Programming and Proto Costs are a major factor.
I can do it , but most folks are looking for a Deal, not to invest into a Brand Name Model.
Lettuce Know if you have realistic Money to invest into a custom model and We can Talk More. |
|
|
|
Dustin Rhodes
From:
Owasso OK
|
Posted 25 Mar 2015 12:14 pm
|
|
| I'm mostly looking for a body for my guitar builder friend to work from. I'm a designer myself. How much would it be for you to just cut something if I do all the modeling and such for you? |
|
|
|
George Piburn
From:
The Land of Enchantment New Mexico
|
Posted 25 Mar 2015 3:12 pm Programming - Cutting
|
|
The CNC Cutter runs 150.00 per hour. Cutters are 50.00 each - only need one.
$150.00 per hour to program some thing.
It always takes 2- 4 hours if not more to translate any drawing file into our CAD,
and to set all of the tool paths - depth of cut - clean up passes and many more considerations.
You would want to run one or 2 in Foam before risking any wood.
Then run at least 2 -4 in poplar wood before risking any expensive wood like Mahogany or Walnut.
Maple is very hard and takes twice the time - as we must slow all of the travel speeds to reduce cutter burn - and it eats up a cutter per piece.
Poplar wood a cutter will last 5 - 8 pieces before getting too dull.
For Example the Consoles in this thread take 30 minutes to set the machine - 50 minutes to run then they need to be trimmed out on a band saw and trace routered to clean up the bottom 1/4 " about another 30 minutes. total time 110 minutes @ $2.50 per minute.
This is for a proved program we have done all of the successful's - oppsies and do overs more than 100 times.
I can make you a 1/4 plexiglass trace router template from a line drawing in Corel 12 for around 200.00 dollars for the 1st one and around 100 dollars for each additional in the same production run. This is a much more monetary efficient means for some one wanting to make 1 or 2 pieces.
_________________
GeorgeBoards S8 Non Pedal Steel Guitar Instruments
Maker of One of a Kind Works of Art that play music too.
Instructional DVDs
YouTube Channel |
|
|
|
George Piburn
From:
The Land of Enchantment New Mexico
|
Posted 29 Mar 2015 9:05 am I've done all of the Critical Work For You
|
|
As stated above , as we go along with labor - I've done all of the Critical Work For You.
So you do less and I charge for labor, you get the advantage of my Fixtures and Jigs for drilling all of the critical Holes for your cornvienience.
The Tuner Holes $80.00
The Nut an Bridge Pre Set Holes for the Chrome Hold Down Screws - Included and parts pre set $40.00
String Through Holes $80.00
The Pickup Hold Down Holes + tapped for the Screws - Included with Separate Priced Alumitone Pickup.
The Pickup to Controls Holes
The Ground from Bridge to Control Holes
The Join the Neck Holes. $25.00 for all
Output Jack Hole ( Separately priced 151 Switchcraft) $5.00
4 Leg Socket Holes = $20.00
The Brass Nut and Bridges are now part of the Kit too. $80.00 in Brass
Top Ferrules Chrome - $16.00
Totals are $250.00 labor $96.00 Parts ---- Accuracy and Time Savings Priceless.
3-30-2015 I've added another Visual Extra to the Front Neck, INLAY BAND across to Hide the Seam line where the lifter board is bonded.
_________________
GeorgeBoards S8 Non Pedal Steel Guitar Instruments
Maker of One of a Kind Works of Art that play music too.
Instructional DVDs
YouTube Channel |
|
|
|
George Piburn
From:
The Land of Enchantment New Mexico
|
Posted 6 Apr 2015 7:47 am New Price Increase 4-6-2015 -UpGradePhotos in Original Post
|
|
I put in a lot of time over the Easter Weekend, to make this Kit closer to a completed Instrument. The Photos are in the Above Original Post.
I've Sanded and applied Zpoxy several times to Seal the Grain , and prepare these bodies for Mirror Finishes with Clear Lacquer,
only a light hand sanding of 320 - 400 grit will make them ready for your spray booth.
The Nuts now have VGrooves -- 11/32 spacing, Graduated depths with a lot more hand sanding
with 800 - 1500 - wet and dry making them ready for nickel plate or strings as you choose.
Jump Quick to get this Double Neck at the lowest price of the Year - Soon It will go up a some more as each labor is completed.
Photos here too.
Zpoxy Filled and Sanded Ready for Lacquer
VGrooved Nuts
_________________
GeorgeBoards S8 Non Pedal Steel Guitar Instruments
Maker of One of a Kind Works of Art that play music too.
Instructional DVDs
YouTube Channel |
|
|
|
