| Author |
Topic: Please Close |
John Booth
From:
Columbus Ohio, USA
|
Posted 2 Mar 2015 10:54 am |
|
please close
_________________
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
..................................
Last edited by John Booth on 24 Mar 2015 3:41 am; edited 1 time in total |
|
|
 |
Mike Kowalik
From:
San Antonio,Texas
|
Posted 2 Mar 2015 9:10 pm tabs....
|
|
The tabs are shown on the Emmons website.....they are on pg.5 of "Replacement Parts" and cost $15 a pair.
_________________
Cremation is my last shot at having a hot body...... |
|
|
|
Ian Worley
From:
Sacramento, CA
|
Posted 2 Mar 2015 9:37 pm
|
|
Do-it-yourself drop-pin to fixed-pin conversion kit: $0.69 at your local Ace Hardware. It's a 1/4" tee nut with a 1/4"x3/4" cap screw. O.D. of the tee nut is same diameter as the drop pin. Swivel still moves a bit.
 |
|
|
|
John Booth
From:
Columbus Ohio, USA
|
Posted 3 Mar 2015 4:27 am
|
|
| Ian Worley wrote: |
Do-it-yourself drop-pin to fixed-pin conversion kit: $0.69 at your local Ace Hardware. It's a 1/4" tee nut with a 1/4"x3/4" cap screw. O.D. of the tee nut is same diameter as the drop pin. Swivel still moves a bit.
|
Ian,
Thanks for the info. So, I assume if my eye-bolt is tight and my height adj feet are
adjusted properly, this is sturdy enough to be perfectly usable without too much slop?
Thanks friend, I'll try it.
JB
_________________
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
.................................. |
|
|
|
Marvin Born
From:
Ohio, USA
|
Posted 3 Mar 2015 7:03 am
|
|
John
I have two pedal feet for you.
Marvin |
|
|
|
Ian Worley
From:
Sacramento, CA
|
Posted 3 Mar 2015 10:14 am
|
|
| correct John, no slop, the thumb screws take care of that whether fixed or drop pin |
|
|
|
