| Author |
Topic: Please help me fix my C pedal |
Jules Belmont
From:
Nashville, TN
|
Posted 23 Feb 2015 6:59 pm |
|
Fixed...thanks all.
Last edited by Jules Belmont on 2 Aug 2018 2:51 pm; edited 1 time in total |
|
|
 |
Lane Gray
From:
Topeka, KS
|
Posted 23 Feb 2015 7:07 pm
|
|
I don't mean to be unhelpful, but I'm not understanding what you mean. What were you adjusting?
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Jules Belmont
From:
Nashville, TN
|
Posted 23 Feb 2015 7:18 pm
|
|
| I was adjusting the plastic pegs with a nut driver to tune the pitches with the pedals down. |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 23 Feb 2015 7:29 pm
|
|
What kind of guitar is it?
If you have an all-pull guitar, it's probably what we call "overtuned".
Loosen ALL the nuts on the A and C pedals until they don't do anything (yes, that's overkill, but it assists the diagnostic process). Now tune the B string, it's probably flat.
Now tune the A pedal til it's at C#.
Now release the pedal and check the B note again.
If it's staying sharp, you might need to adjust the pedal stop.
Once the A pedal is good, move on to the C pedal. Tune the nut til it goes to C#. Then release the pedal and check the B note.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Jules Belmont
From:
Nashville, TN
|
Posted 23 Feb 2015 7:33 pm
|
|
It's a Stage One by Zumsteel...
Thanks for the help, I'll try this right now. My A pedal was coming in way flat, B pedal not as much, but still flat. |
|
|
|
Jules Belmont
From:
Nashville, TN
|
Posted 23 Feb 2015 7:40 pm
|
|
| The C pedal is jumping from E to G when engaged. |
|
|
|
John Scanlon
From:
Jackson, Mississippi, USA
|
Posted 23 Feb 2015 9:30 pm
|
|
| Jules Belmont wrote: |
| It's a Stage One by Zumsteel.... |
I don't know the full solution, but I can tell you that means it's a pull-release guitar. The process is a bit different. Run a search for tuning a pull release, or for tuning a Marlen (many were pull-release, mine isn't, though).
Good luck.
_________________
Click here for the Index to Mickey Adams's YouTube video lessons
Insert impressive gear list here. |
|
|
|
richard burton
From:
Britain
|
Posted 24 Feb 2015 12:03 am
|
|
The coloured nylon tuners are pre-set, so don't turn them
 |
|
|
|
Jason Putnam
From:
Tennessee, USA
|
Posted 24 Feb 2015 5:04 am
|
|
Best advice you can use. Call Doug Earnest. He will be more than happy to help you with the problem. He's a great guy. Just search him on the forum or go to stage one website.
_________________
1967 Emmons Bolt On, 1995 Mullen PRP 3x5,Nashville 112, JOYO Digital Delay, Goodrich Volume Pedal, Livesteel Strings |
|
|
|
Henry Matthews
From:
Texarkana, Ark USA
|
Posted 24 Feb 2015 8:14 pm
|
|
Can't you just back off the nylon nut that tunes your E string to F# until it gets to F#?
Sounds to me like you over tuned it. Just back that nylon nut on E string out until it doesn't contact changer with nothing pushed, then see where the E string goes with pushed or what Lane said. That's what it sounds like to me.
_________________
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
Jules Belmont
From:
Nashville, TN
|
Posted 28 Feb 2015 8:07 pm
|
|
| Many thanks to all who posted here. Was certainly overtuned. Got it all ironed out and sounded great on the last gig! |
|
|
|
