| Author |
Topic: Request Help in Connecting Effects, Black Box |
Allan Jirik
From:
Wichita Falls TX
|
Posted 17 Feb 2015 7:18 pm |
|
| I sold my guitar, had some life changes, picked up another guitar and now I'm ready to go again. I just can't remember where to place the effects and Black Box and where to plug 'em into my 112. I have a TU3 tuner, reverb, delay, chorus and the Black Box. Any help would be appreciated. Thank you. |
|
|
 |
Rick Schacter
From:
Portland, Or.
|
Posted 17 Feb 2015 9:21 pm
|
|
Guitar------>Black Box -------->volume pedal------->FX------>amp
If you have a second output on your volume pedal, connect your tuner to that output.
***If you have an FX loop on your amp, try connecting your FX there. |
|
|
|
Brad Sarno
From:
St. Louis, MO USA
|
Posted 17 Feb 2015 9:25 pm
|
|
What Rick said, except you may want to use the tuner-out jack on the Black Box to connect the tuner so you can tune silently by backing the volume pedal off.
B |
|
|
|
Rick Schacter
From:
Portland, Or.
|
Posted 18 Feb 2015 7:47 am
|
|
Oops. I forgot about that.
Connecting the tuner to the "tuner out" on the Black Box is definitely better. |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 18 Feb 2015 9:47 am Request help in hooking up effects, Black Box, etc
|
|
I like to have reverb in my effects loop. My Wet Reverb pedal sounds better in the effects loop. Brian at the Neuaber factory said that was the ideal way to hook it up.
I don't have all the other effects, so other's can help out with that. I have the Black Box and you have been given correct hookup instructions for it already.
Welcome back to the world of PSG. I hope you are here to stay this time. |
|
|
|
Allan Jirik
From:
Wichita Falls TX
|
Posted 18 Feb 2015 4:02 pm
|
|
Started in 1969 and it's been downhill from there  Seriously, thanks guys. Now how do I plug into the 112- Pre, Post, or the inputs in the back?? |
|
|
|
Rick Schacter
From:
Portland, Or.
|
Posted 18 Feb 2015 5:45 pm
|
|
| Allan Jirik wrote: |
| Started in 1969 and it's been downhill from there Seriously, thanks guys. Now how do I plug into the 112- Pre, Post, or the inputs in the back?? |
Allan, I don't have a 112.
Is this a Peavey Nashville 112?
If so, it sounds like you are describing the Effects Loop.
If that's the case, that's where you could plug your FX in.
Pre-amp out to FX in. FX out to Power amp in. |
|
|
|
