| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic What's your view on this subject?
Reply to topic
Author Topic:  What's your view on this subject?
Ray Montee


From:
Portland, Oregon (deceased)
Post  Posted 8 Dec 2014 7:01 pm    
Reply with quote

Had YOU just went out and purchased a very expensive multi-neck pedal steel guitar, with eight on the floor and five hanging........

What would be your choice and in what order would you rate the most destructive TONE/sound altering electronic affects stomp boxes for that expensive new, expertly designed, well engineered and beautiful manufactured electric pedal steel guitar?

Just curious..........with so many choices available these days.
View user's profile Send private message Send e-mail Visit poster's website
Mike Neer


From:
NJ
Post  Posted 8 Dec 2014 7:15 pm    
Reply with quote

Ring modulator, without a doubt. I love them! Last year, I had 2 on my pedalboard.
_________________
Links to streaming music, websites, YouTube: Links
View user's profile Send private message Send e-mail Visit poster's website
Frank James Pracher


From:
Michigan, USA
Post  Posted 8 Dec 2014 8:51 pm    
Reply with quote

I build my own "destructive, TONE/sound altering" boxes. My first choice is reverb. My second is a vibrato or tremolo circuit. Third would be a delay.
_________________
"Don't be mad honey, but I bought another one"
View user's profile Send private message Send e-mail
Mike Perlowin


From:
Los Angeles CA
Post  Posted 9 Dec 2014 2:19 pm    
Reply with quote

Ray,what do you mean by "destructive?" Effects, when used properly can greatly enhance the steel. There are times and places where they are called for. There are also some players who overuse them, or use them inappropriately. But the effects themselves are only tools. Don't blame them for those who misuse them.

Be that as it may, a lot of older effects can kill your tone even when turned off, merely by being in the signal path. They can cause unwanted distortion, and/or rob the signal of os high end frequencies.

The solution to this is to bypass the effect entirely when it's not in use, and fortunately, many manufacturers are now putting bypass loops in their effects.

I have some of these older effects, and had to rig up a box with 4 bypass loops in order to use them. The effects were always kept on, and either routed through or completely away from the signal path.

I still have the wiring diagram for the bypass loops, in case anybody wants it.
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
View user's profile Send private message Send e-mail Visit poster's website
Dale Rottacker


From:
Walla Walla Washington, USA
Post  Posted 10 Dec 2014 8:24 am    
Reply with quote

I think it’s like Mike said, enhance not destroy is what we’re after with effects.

I’m pretty new to the “Effects” club...I played about 40 years with just an amp with builtin reverb and the very first Sho~Bud Allen Bradley Pot pedal I bought...

Not being around effects back in the 70’s what I thought I was hearing effects wise, to me was gimmicky and rather than enhance the steel, I felt it took away from it...so like I said, it took me 40 years to get my feet wet, and I’m happy that I did.

The first thing I did was get a Profex ll and initially wasn’t as impressed as I’d hoped, until I added some George L cables, which helped clean up some of the noise I was experiencing...Then Jim Lindsey talked me into adding a second amp, because the Profex ll was a stereo unit, and after doing so was thrilled with what I was hearing...and last but not least, plugged a L’il Izzy into my guitar first and WOW...the lights came on, bells started ringing, tears started welling up in my eyes...you get the picture...I’m really happy with the additions of these effects, and the effect it has had on my sound...now If I could get someone who could actually play the thing so I could really tell how good it could sound.
_________________
Dale Rottacker, Steelinatune™
https://www.youtube.com/@steelinatune
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
View user's profile Send private message Send e-mail Visit poster's website
Dave Harmonson


From:
Seattle, Wa
Post  Posted 10 Dec 2014 9:22 am    
Reply with quote

Wondering what event is being announced on this thread Smile
_________________
www.facebook.com/countrydaveharmonson
View user's profile Send private message Send e-mail Visit poster's website
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 10 Dec 2014 1:28 pm    
Reply with quote

Although not electronic, I would say my hands are the most destructive. Ring modulator would also be my first choice. Excessive delay would be next.

Quote:
Wondering what event is being announced on this thread


Well, I could announce that I am playing somewhere this weekend. There, we are on topic.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron