| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Volume Pedal Usage
Reply to topic
Author Topic:  Volume Pedal Usage
Deirdre Higgins


From:
Connecticut, USA
Post  Posted 9 Nov 2014 12:31 pm    
Reply with quote

Hi all, I just purchased a volume pedal and would like a few tips on how to use it properly to enhance playing. Thanks
_________________
Jerry Byrd Fan
View user's profile Send private message Send e-mail
Jeff Spencer

 

From:
Queensland, Australia
Post  Posted 9 Nov 2014 12:59 pm    
Reply with quote

Hi Deirdre, consider thinking if it as an expression pedal rather than a volume pedal. You will be surprised how subtle thinking can alter how it is used. Pick you chord/note then 'squeeze' you pedal ever so smoothly.
View user's profile Send private message Send e-mail Visit poster's website
Deirdre Higgins


From:
Connecticut, USA
Post  Posted 9 Nov 2014 1:16 pm    
Reply with quote

Jeff Spencer wrote:
Hi Deirdre, consider thinking if it as an expression pedal rather than a volume pedal. You will be surprised how subtle thinking can alter how it is used. Pick you chord/note then 'squeeze' you pedal ever so smoothly.


Thank You Jeff Smile
_________________
Jerry Byrd Fan
View user's profile Send private message Send e-mail
Tom Snook

 

From:
Ft. Lauderdale, Florida, USA
Post  Posted 9 Nov 2014 3:09 pm    
Reply with quote

Deirdre,did you know that our Hero Jerry Byrd had his volume pedal wired Bass Ackward.
His pedal volume decreased when he pushed down.
_________________
I wanna go back to my little grass shack........
View user's profile Send private message Send e-mail
Doug Beaumier


From:
Northampton, MA
Post  Posted 9 Nov 2014 3:11 pm    
Reply with quote

Deirdre, set your amp volume a little louder than you need it, and play with the volume pedal about 1/2 way down. Pick a chord and as the sound fades, press lightly on the pedal to draw out the sound. Then come back to the middle position before picking the strings again. The correct range of motion for the volume pedal is from about 1/2 way down to about 3/4 way down.
There are two mistakes that beginners make with a volume pedal... either they "pump" the pedal too much, which sounds awful, or they stomp down on it all the way and leave it there, which defeats the purpose of the volume pedal. It should be used to draw out notes/chords when necessary and then to soften your string attack when necessary. If used properly it will enhance your overall sound, make it smoother. If you watch a pro steel player's foot on a volume pedal you'll notice that the foot (and pedal) move very little.
_________________
My Site / My YouTube Channel
25 Songs C6 Lap Steel / 25 MORE Songs C6 Lap Steel / 16 Songs, C6, A6, B11 / 60 Popular Melodies E9 Pedal Steel
View user's profile Send private message Send e-mail Visit poster's website
Ray Montee


From:
Portland, Oregon (deceased)
Post  Posted 9 Nov 2014 4:55 pm     Hi again................
Reply with quote

To get an idea of one way that a volume pedal can be used, you might visit the jerrybyrd-fanclub.com site.


The home page this month features an old George Morgan tune with Jerry's fabulous guitar throughout.
View user's profile Send private message Send e-mail Visit poster's website
Deirdre Higgins


From:
Connecticut, USA
Post  Posted 9 Nov 2014 7:40 pm    
Reply with quote

Thanks for the Tips guys, your the best.
_________________
Jerry Byrd Fan
View user's profile Send private message Send e-mail
Liz Williams

 

From:
California, USA
Post  Posted 16 Nov 2014 9:06 am    
Reply with quote

Thanks for the question too, Deirdre. Very often, I come to to forum looking for an answer and find it under a question you've posed.

So, guitar volume open all the way, amp a little too loud and default volume pedal position is halfway. Lightly press to 3/4 to draw out a chord you've already played.

That shouldn't take too long to master. <falls>
View user's profile Send private message Send e-mail
Tom Keller

 

From:
Greeneville, TN, USA
Post  Posted 17 Nov 2014 8:19 pm    
Reply with quote

I find the volume pedal more difficult to use with a non pedal guitar. Too much volume pedal and one starts sounding like a musical saw player. Ohhhh!


Tom Keller
View user's profile Send private message Send e-mail
Fred Layman

 

From:
Springfield, Missouri USA
Post  Posted 18 Nov 2014 6:54 am     volume pedal
Reply with quote

Think of the volume pedal as a means for sustaining volume and refrain from "pumping" it. After you have plucked the strings, slowly push the pedal down to sustain the amount of volume that you want.
View user's profile Send private message Send e-mail
Tom Campbell

 

From:
Houston, Texas, USA
Post  Posted 18 Nov 2014 7:42 am    
Reply with quote

Thanks Doug...I needed that!
View user's profile Send private message Send e-mail
Doug Beaumier


From:
Northampton, MA
Post  Posted 18 Nov 2014 8:31 am    
Reply with quote

Here's a video I made last year. I've been told that it's a good demonstration of volume pedal usage, although I wasn't thinking about that when I made the video. The pedal is pressed to draw out the sustained notes and chords, and then brought back when the next notes are picked. After a while this becomes part of your playing technique and you don't even think about it. It just happens.

---> https://www.youtube.com/watch?v=X1pJUQAYYxc
_________________
My Site / My YouTube Channel
25 Songs C6 Lap Steel / 25 MORE Songs C6 Lap Steel / 16 Songs, C6, A6, B11 / 60 Popular Melodies E9 Pedal Steel
View user's profile Send private message Send e-mail Visit poster's website
Jack Aldrich

 

From:
Washington, USA
Post  Posted 18 Nov 2014 11:48 am    
Reply with quote

Jeff Newman showed me how to use the volume pedal for pedal steel. As Doug said, you set the volume control on the amp higher than you want and keep the volume pedal about halfway to max and work from there.
_________________
Jack Aldrich
Carter & ShoBud D10's
D8 & T8 Stringmaster
Rickenbacher B6
3 Resonator guitars
Asher Alan Akaka Special SN 6
Canopus D8
View user's profile Send private message Send e-mail
Jack Aldrich

 

From:
Washington, USA
Post  Posted 18 Nov 2014 11:49 am    
Reply with quote

Also, I don't use a volume pedal to play Hawaiian and non-pedal Western Swing.
_________________
Jack Aldrich
Carter & ShoBud D10's
D8 & T8 Stringmaster
Rickenbacher B6
3 Resonator guitars
Asher Alan Akaka Special SN 6
Canopus D8
View user's profile Send private message Send e-mail
John Mulligan

 

From:
Ontario, Canada
Post  Posted 18 Nov 2014 12:54 pm    
Reply with quote

Some people WANT to sound like a musical saw! I came across a guy who got a lap steel because he wanted his steel to sound like a theremin. If you never heard of one, google it! it is best known for making spooky noises in old scary movies!

Sometimes I use my volume pedal to make my steel sound like a violin. I'm not very detail-oriented and I'm a slow learner. I would say hook up the volume pedal and play around with it for a few hundred hours until it starts making noises you like! I never worry about doing things the wrong or right way, I just play until it sounds good. The tips from all the other players here are excellent tips, too.

Enjoy!
View user's profile Send private message Send e-mail
Bill Creller

 

From:
Saginaw, Michigan, USA (deceased)
Post  Posted 20 Nov 2014 12:22 am    
Reply with quote

I still have the DeArmnod volume pedal I bought from the late 40s when I played country music.
Getting into Hawaiian music after a 40 year hiatus from music, I didn't use the pedal much again. It's still OK if used right.....

And it EATS volume pots ! Confused
View user's profile Send private message Send e-mail
Andrew Roblin

 

From:
Various places
Post  Posted 20 Nov 2014 5:26 am    
Reply with quote

GREAT lesson on volume pedal, vibrato, melody interpretation and just all-around artistry from the GREAT Doug Beaumier!
View user's profile Send private message Send e-mail Visit poster's website
Chris Walke

 

From:
St Charles, IL
Post  Posted 20 Nov 2014 8:01 am    
Reply with quote

Doug Beaumier wrote:
Here's a video I made last year. I've been told that it's a good demonstration of volume pedal usage, although I wasn't thinking about that when I made the video. The pedal is pressed to draw out the sustained notes and chords, and then brought back when the next notes are picked. After a while this becomes part of your playing technique and you don't even think about it. It just happens.

---> https://www.youtube.com/watch?v=X1pJUQAYYxc


Also a fabulous illustration of pick blocking technique. Enjoyed that, Doug. Thanks!
View user's profile Send private message Send e-mail
Doug Beaumier


From:
Northampton, MA
Post  Posted 20 Nov 2014 8:29 am    
Reply with quote

Thanks, guys!
_________________
My Site / My YouTube Channel
25 Songs C6 Lap Steel / 25 MORE Songs C6 Lap Steel / 16 Songs, C6, A6, B11 / 60 Popular Melodies E9 Pedal Steel
View user's profile Send private message Send e-mail Visit poster's website
John Booth


From:
Columbus Ohio, USA
Post  Posted 20 Nov 2014 8:34 am    
Reply with quote

Never "Pump" it like a car accelerator.
That's all I have to say bout dat Mr. Green
_________________
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
..................................
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron