| Author |
Topic: Amp Comparison |
Gary Holt
From:
Newport,TN.,USA
|
Posted 25 Oct 2014 5:16 am |
|
In the past few months there have been several posts on the forum about the Quilter Steelaire, the Milkman Half and Half and the Telonics TCA-500. I'm sure each one of these amps are great and that each have their own great qualities. However, if you were given an opportunity to choose one of these amps, without any cost to you, which one would you pick.  |
|
|
 |
Roger Francis
From:
kokomo,Indiana, USA
|
Posted 25 Oct 2014 5:28 am
|
|
My first pick would be the milk man= tubes!!
_________________
Rittenberry SD10, 2 nashville 112s with telonics speaker, behringer EPQ450 power amp, 705 pups, Telonics FP-100, live steel strings, mogami cords, wet reverb |
|
|
|
Greg Cutshaw
From:
Corry, PA, USA
|
Posted 25 Oct 2014 6:00 am
|
|
| The Steelaire Pro with the deeper cabinet. At least one of the reviews on the Quilter site mentioned that the Pro cabinet had a little more bass. Now IF the Pro was available for $1399 I would buy it! I've have better luck and heard better sounds at higher volumes with transistor amps than tube or hybrid ones. This includes the Webb 6-14-E, Nash 400, Steel King and the Walker Stereo Steel. |
|
|
|
Norman Evans
From:
Tennessee
|
|
|
|
Greg Cutshaw
From:
Corry, PA, USA
|
|
|
|
Daniel Policarpo
|
Posted 25 Oct 2014 6:36 pm
|
|
| I'd really like to try the Quilter Steelaire Pro. |
|
|
|
Mike Perlowin
From:
Los Angeles CA
|
Posted 26 Oct 2014 12:42 am
|
|
| Daniel Policarpo wrote: |
| I'd really like to try the Quilter Steelaire Pro. |
I did. I also tried out as Roland cube 80GX. I decided to get the Quilter, despite the huge difference in price. I'm going to sell some of my other gear to help pay for it.
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin |
|
|
|
Greg Cutshaw
From:
Corry, PA, USA
|
Posted 26 Oct 2014 4:52 am
|
|
Can you also sell some of your gear to help ME pay for it?
Maybe we can arrange a group buy like they do on the electronics forums...... |
|
|
|
Greg Cutshaw
From:
Corry, PA, USA
|
Posted 26 Oct 2014 4:53 am
|
|
| Mike did you compare the combo versus the Pro Steelaire? |
|
|
|
Mike Perlowin
From:
Los Angeles CA
|
Posted 26 Oct 2014 5:03 am
|
|
| Greg Cutshaw wrote: |
| Mike did you compare the combo versus the Pro Steelaire? |
Mu bad. I tried out the combo, not the pro. 
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 26 Oct 2014 9:07 am
|
|
| Mike Perlowin wrote: |
| Greg Cutshaw wrote: |
| Mike did you compare the combo versus the Pro Steelaire? |
Mu bad. I tried out the combo, not the pro. |
But, did you like the combo? That's what counts.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Mike Perlowin
From:
Los Angeles CA
|
Posted 26 Oct 2014 9:34 am
|
|
Richard, I liked it enough to decide to get one.
I loved the weight. It's supposed to weigh 35 pounds. Somebody here said it was only 32. I love my Music Man HD2312, but it weighs over 70 pounds, and I'm too old to be lugging it around anymore. I like the 22 pound ZT Clubs too, but they don't have the tone of the quilter.
It is very clean sounding, and has enough control to give you any kind of tone you want. Plus it has an effects loop so you can add delay or distortion or one of those new Electro Harmonx B9 organ simulators etc.
It has a tremolo circuit, which I feel is unnecessary. I think it would have been better to have a built in delay instead.
The only drawback (besides the hefty price,) is that it only has a single input. I'd prefer 2 of them like a Fender or Music Man.
I had planned to go to the Phoenix show next January, but I'm going to get the amp instead. I'm going to sell some of my other gear to help pay for it.
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin |
|
|
|
Greg Cutshaw
From:
Corry, PA, USA
|
|
|
|
George Macdonald
From:
Vancouver Island BC Canada
|
Posted 26 Oct 2014 10:11 am "Custom 15" speaker"
|
|
| Greg, I wonder how this speaker differs from the EPS 15C made by Eminence? |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 26 Oct 2014 10:29 am Amp Comparison
|
|
I would like to see the Classic Tube amp (formerly Vintage Vibe) thrown into the mix also. If you haven't seen the video testimonial of Cowboy Eddie Long playing one, you might want to check it out at www.classictubesound.com. It's all tube and sounds pretty impressive.
This is a thread that I have been meaning to start, so I am glad to see that other's are interested in a comparison, also. |
|
|
|
Greg Cutshaw
From:
Corry, PA, USA
|
Posted 26 Oct 2014 10:35 am
|
|
| I posted a question in the Quilter forum asking about the tone differences between the Pro and Combo models. |
|
|
|
Mike Perlowin
From:
Los Angeles CA
|
Posted 26 Oct 2014 10:45 am
|
|
Greg, Jim Palenscar has one of each in his shop. He is currently on vacation, but we can ask him about this when he gets back.
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin |
|
|
|
Doug Beaumier
From:
Northampton, MA
|
Posted 26 Oct 2014 11:12 am
|
|
I've had my Quilter Combo for two days now and I'm really enjoying playing through it!
A lot has been said in other threads, but basically, it has a warm, tube-like sound (to my ears), a great reverb, and is very lightweight. The weight is a big selling point for me. I played (and hauled around) a Steel King for the past seven years, so this amp is a welcome change. Of course, it doesn't have the rumbling, thundering Lows of a Steel King, but it's a well balanced sound, enough lows, rich highs that are Not harsh at all. I've never tried the Pro model, but I'm guessing that the larger cabinet might provide more lows. Having said that, the Combo sounds excellent to me, and it's so easy to carry around. Loading the car for a gig is simple now! ...just my S-10, the amp, seat, and a few accessories. No outboard effects needed.
_________________
My Site / My YouTube Channel
25 Songs C6 Lap Steel / 25 MORE Songs C6 Lap Steel / 16 Songs, C6, A6, B11 / 60 Popular Melodies E9 Pedal Steel |
|
|
|
Daniel Policarpo
|
Posted 26 Oct 2014 6:56 pm
|
|
| Mike Perlowin wrote: |
| Greg Cutshaw wrote: |
| Mike did you compare the combo versus the Pro Steelaire? |
Mu bad. I tried out the combo, not the pro. |
The Pro looks pretty cool , with the removable head and larger cab. I think I could definitely "make do" with a Combo, though.  |
|
|
|
Tim Marcus
From:
San Francisco, CA
|
Posted 26 Oct 2014 7:30 pm
|
|
Consider this: If you need a new amp and you need it now, Milkman might not be the right one for you
The specs are similar enough - my Half and Half is lighter, louder, and has actual tubes but I can't get you one for months. Something about the hand wired hand built part didn't make it onto the spec sheet 
_________________
Milkmansound.com |
|
|
|
Greg Cutshaw
From:
Corry, PA, USA
|
Posted 27 Oct 2014 4:36 am
|
|
In this video you can see the Pro and Combo side by side near the end. It mentions that the Pro has a pass through channel from the effects loop patch panel to the bottom of the amp. This way you could place for example a delay pedal in the bottom of the amp, patch it in and power it from the amp and switch it in and out using the leg mounted control panel. This would all be powered from and contained inside the amp, one less thing to carry and hookup although it would not give you access to the delay controls.
https://www.youtube.com/watch?v=1b3jfcoTvPU#t=683 |
|
|
|
Dave Bertoncini
From:
Sun City West, Arizona USA
|
Posted 27 Oct 2014 5:33 am
|
|
| The combo has the pass through too. I think the video has a subtitle stating that. |
|
|
|
Greg Cutshaw
From:
Corry, PA, USA
|
Posted 27 Oct 2014 7:06 am
|
|
| Now we need a delay pedal with bluetooth remote controls! |
|
|
|
Doug Beaumier
From:
Northampton, MA
|
Posted 27 Oct 2014 7:34 am
|
|
Regarding the Quilter Combo and Pro... it looks like the only difference is the Pro has a taller cabinet, a detachable head, and a pass-through that allows you to quickly put your stomp boxes in the back of the amp. The other specs appear to be the same on both amps. The Pro is $400 more than the Combo. Portability is #1 with me at this point in my life, so I think I made the right decision getting the Combo.
Hey, do you think any of these newfangled steel amps could include a pitch corrector! 
_________________
My Site / My YouTube Channel
25 Songs C6 Lap Steel / 25 MORE Songs C6 Lap Steel / 16 Songs, C6, A6, B11 / 60 Popular Melodies E9 Pedal Steel |
|
|
|
Dave Bertoncini
From:
Sun City West, Arizona USA
|
Posted 27 Oct 2014 9:04 am
|
|
| Dave Bertoncini wrote: |
| The combo has the pass through too. I think the video has a subtitle stating that. |
|
|
|
|
