| Author |
Topic: Fourth pedal |
Ian Rae
From:
Redditch, England
|
Posted 3 Oct 2014 1:31 am |
|
I notice that a lot of E9 guitars have a fourth pedal. I have two questions:-
Is it always a Franklin pedal or are there alternatives? Which end does it usually go?
I might do a poll, but I need to be sure how to frame it.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
 |
Lane Gray
From:
Topeka, KS
|
Posted 3 Oct 2014 6:28 am
|
|
I, and others, use a "Zero pedal" to raise 1 & 2 to G# and E.
I've also seen lowering of 3 and 6 to G.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Ted Nesbitt
From:
Northern Ireland
|
Posted 3 Oct 2014 7:44 am Zero Pedal
|
|
| My Infinity SD10 is set-up Zero, A B C My Zero pedal lowers strings 4 + 8 a full tone. Nice 7th chord. Try it, you will like it. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 3 Oct 2014 2:15 pm
|
|
I have 5 pedals on my E9 (4 on C6). Mine are
Zero (1st pedal) - not really used at this time
2nd pedal: C pedal
3rd pedal: B pedal
4th pedal: A pedal
5th pedal: raises 1 to G# and 2 to E
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting. |
|
|
|
Jamie Mitchell
From:
Nashville, TN
|
Posted 3 Oct 2014 6:33 pm
|
|
| I have G# to G on mine, so I could get some lower minor chords with a ninth in them... |
|
|
|
Larry Allen
From:
Kapaa, Kauai,Hawaii
|
Posted 8 Oct 2014 10:32 am 4th pedal
|
|
same as Lane with 1 and 2 raising also 7raise to G#... 
_________________
Excel steels & Peavey amps,Old Chevys & Motorcycles & Women on the Trashy Side |
|
|
|
