| Author |
Topic: Wiring for a Stringmaster Quad |
Jeff Mead
From:
London, England
|
Posted 13 Aug 2014 11:25 am |
|
As you may have seen from my other thread, I am restoring a Quad Stringmaster.
I've got the necks and the hardware I need with the exception of the neck selecter.
The one I have is for a triple neck and I was thinking of fitting 4 toggles like in the picture.
The only guitar toggle switches I can find are "Les Paul" style 3 position switches, but I need simple on/off I can find them for power supplies (usually 12v). Would they work? Does anyone know a source for the style in the photo?
Also, if anyone has a wiring diagram for a 4 neck Stringmaster (modern type with blend knob) I'd be very grateful.
 |
|
|
 |
Brad Bechtel
From:
San Francisco, CA
|
|
|
|
Jeff Mead
From:
London, England
|
Posted 13 Aug 2014 12:47 pm
|
|
Thanks Brad,
When the time comes, I'll pass it to the guy who will wiring it all up for me.
I'm sure it's easy enough to work out how to add an extra neck in (especially as the 4th neck is exactly the same as the 3rd) for someone who knows what they are doing - i.e. not me  |
|
|
|
Doug Beaumier
From:
Northampton, MA
|
|
|
|
Tom Pettingill
From:
California, USA (deceased)
|
|
|
|
Jeff Mead
From:
London, England
|
Posted 14 Aug 2014 5:56 am
|
|
Thanks Tom,
I atually have those switches on my T-8 and they work fine. Ironically, it was my thoughts of replaacing these with a proper push button switch that led to the quad project.
While they work fine, they look a bit modern to me and I really prefer the look of the larger switches in the photo I posted.
I realise that the pickups generate a tiny voltage (I wasn't worried about blowing anything up) I was worried that using something intended for power level voltage might have had some associated problem with resistance or whatever, making them unsuitable. |
|
|
|
Tom Pettingill
From:
California, USA (deceased)
|
Posted 14 Aug 2014 6:19 am
|
|
No need to worry about the larger style, they will work fine. While a larger higher voltage switch may contain a little larger conductor, resistance would actually be a little less. You can think of resistance a lot like traffic on the freeway. Electrons are the cars, and the bigger the road, the more electrons can travel freely, or, with less resistance. Or in our low voltage case, its like two Jaguar F-Type's racing on a empty track.
_________________
Some misc pics of my hand crafted steels
Follow me on Facebook here |
|
|
|
Jeff Mead
From:
London, England
|
Posted 14 Aug 2014 8:53 am
|
|
Thanks again Tom - I think I understand now - good analogy.
I think I may have found a suitable switch - just need to check there is enough space in the control cavity under the plate.
Just need to work out if I can drill 4 holes neatly in place of the 3 already there. |
|
|
|
Joe Naylor
From:
Avondale, Arizona, USA
|
Posted 14 Aug 2014 9:10 am Brad is right
|
|
John Ely there is triple neck on there but you can figure out fairly quickly how to do the 4th
www.hawaiiansteel.com/instruments/diagrams.php
Joe Naylor
www.steelseat.com
_________________
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP |
|
|
|
Alan Brookes
From:
Brummy living in Southern California
|
Posted 14 Aug 2014 9:53 am
|
|
| Jeff Mead wrote: |
| ...While they work fine, they look a bit modern to me and I really prefer the look of the larger switches in the photo I posted... |
Have you tried Tandy?
(For American members I should mention that Tandy is the company that owns Radio Shack, and, outside of the U.S. their stores are all labelled Tandy, although inside the stores they look exactly the same as RAdio Shack, and their catalogues are in the same house style.) |
|
|
|
George Piburn
From:
The Land of Enchantment New Mexico
|
Posted 14 Aug 2014 11:14 am Ace is the Place
|
|
Ace Hardware on line Has them, -- you want On-On
The Ace Type are made for Motors or Lighting, and are some thing like 10 - 15 amps @120 volt, = super heavy duty.
I use Gaynor Switches -- if you can find them they are the best, In my case I buy them 100 at a time to be able to buy directly from the Manufacture.
I am certain you can find something in UK at a Lighting Shop or Auto Spares Shop.  |
|
|
|
Jeff Mead
From:
London, England
|
Posted 14 Aug 2014 12:46 pm
|
|
| Alan Brookes wrote: |
Have you tried Tandy?
|
Sadly, all the Tandy stores over here closed a good few years ago, although I just noticed to my suprise that thy still have an online presence.
They have pretty much been replaced by Maplin although there aren't nearly as many of them as there were of Tandy (one in every high street pretty much).
I've still got a couple of Tandy ("Realistic" brand) PZM mics that I still use from time to time. |
|
|
|
Michael James
From:
La Crosse, Wisconsin, USA
|
Posted 10 Aug 2019 3:32 am T8 Switches
|
|
Hey Jeff,
This is a really old post.
On your T8 how did you have the toggle switches set up?
Simple on/off for each neck? |
|
|
|
Jeff Mead
From:
London, England
|
Posted 10 Aug 2019 3:42 am Re: T8 Switches
|
|
| Michael James wrote: |
Hey Jeff,
This is a really old post.
On your T8 how did you have the toggle switches set up?
Simple on/off for each neck? |
Yes, on off for each neck - same as I did with the full size toggles on the quad and on my more recent double.
I had a harness that held the switches with just the toggles poking through the holes to avoid drilling out the control plate. |
|
|
|
Michael James
From:
La Crosse, Wisconsin, USA
|
Posted 10 Aug 2019 3:50 am
|
|
Thanks for the info Jeff!
Did you use mini 1/4" (6.35mm) switches or the larger 15/32" (12mm) switches? |
|
|
|
Jeff Mead
From:
London, England
|
Posted 10 Aug 2019 6:56 am
|
|
Yes, the smaller ones.
I'm pretty sure I've still got them in my parts drawer with the harness we made if that's any use to you. Just PM me your address. |
|
|
|
Jeff Mead
From:
London, England
|
Posted 10 Aug 2019 7:06 am
|
|
Yes, the smaller ones.
I'm pretty sure I've still got them in my parts drawer with the harness we made if that's any use to you. Just PM me your address. |
|
|
|
Michael James
From:
La Crosse, Wisconsin, USA
|
Posted 10 Aug 2019 10:50 am
|
|
| Would it be possible to post a pic of the harness? |
|
|
|
Michael James
From:
La Crosse, Wisconsin, USA
|
Posted 13 Aug 2019 4:04 pm
|
|
| You wouldn't happen to have a wiring diagram for converting from the 3 bush button to the three toggle switches? |
|
|
|
Jeff Mead
From:
London, England
|
Posted 13 Aug 2019 11:26 pm
|
|
| Michael James wrote: |
| Would it be possible to post a pic of the harness? |
As you can see, it's a plate that holds the mini toggles in place with just the levers poking through the holes. The mounting screws use the same holes the original switch assembly used.
 |
|
|
|
Michael James
From:
La Crosse, Wisconsin, USA
|
Posted 14 Aug 2019 4:25 am
|
|
| Very interesting and innovative! Thanks for posting the pic! |
|
|
|
Michael James
From:
La Crosse, Wisconsin, USA
|
Posted 3 Sep 2019 12:07 pm
|
|
I ended up using three simple mini on/off toggles. I found some (1/4"X7/8") chrome washers at the hardware store that did a great job of hiding the old switch mounting holes.
I had to drill out the plate holes with a 15/64" drill bit so the mini toggles would mount into the plate.
I did not have to remove any wood from the switch cavity. It was a very close fit. There was no room to spare.
It came out really nice and works perfectly. Toggles pointing towards the pickups is on.
 |
|
|
|
Alan Brookes
From:
Brummy living in Southern California
|
Posted 4 Sep 2019 9:14 am
|
|
| On instruments with two pickups I've found it useful to use double-pole-double-throw switches so that I can throw the pickups in or out of phase with each other. Out-of-phase pickups can give a completely different sound, which can sometimes be useful. |
|
|
|
