| Author |
Topic: need foot pedal Fender Sho Bud 1970s |
Walter Seaman
From:
Iowa, USA
|
Posted 7 Aug 2014 10:29 am |
|
Does anyone know where I might find a replacement foot pedal for Fender Sho Bud PSG, 3 pedals, from the 1970s?
 |
|
|
 |
Bob Carlucci
From:
Candor, New York, USA
|
Posted 7 Aug 2014 5:09 pm Re: need foot pedal Fender Sho Bud 1970s
|
|
| Walter Seaman wrote: |
Does anyone know where I might find a replacement foot pedal for Fender Sho Bud PSG, 3 pedals, from the 1970s?
|
Just get a small Sho bud pedal, if you can't find one from a Fender, They are the same.. James Morehead has them... They don't have the ridges, but if it is that important to you to have them, you could have them cut in , or do it yourself with a cut off tool or jewelers file, pencil lines, and a steady hand
_________________
I'm over the hill and hittin'rocks on the way down!
no gear list for me.. you don't have the time...... |
|
|
|
Bob Carlucci
From:
Candor, New York, USA
|
Posted 7 Aug 2014 5:10 pm Re: need foot pedal Fender Sho Bud 1970s
|
|
double post
_________________
I'm over the hill and hittin'rocks on the way down!
no gear list for me.. you don't have the time......
Last edited by Bob Carlucci on 7 Aug 2014 5:12 pm; edited 1 time in total |
|
|
|
Bob Carlucci
From:
Candor, New York, USA
|
Posted 7 Aug 2014 5:10 pm
|
|
btw, HOW did you manage to break a floor pedal that way????
_________________
I'm over the hill and hittin'rocks on the way down!
no gear list for me.. you don't have the time...... |
|
|
|
Walter Seaman
From:
Iowa, USA
|
Posted 7 Aug 2014 7:56 pm
|
|
| Thanks Bob I will follow the lead you suggested. As to how it broke, you see those dumbbells in back of the guitar? One took an unscheduled trip one weight-lifting evening, deciding I needed to add a little C pedal to my lifting music! |
|
|
|
Godfrey Arthur
From:
3rd Rock
|
Posted 17 Aug 2014 9:27 pm
|
|
| Bob Carlucci wrote: |
| btw, HOW did you manage to break a floor pedal that way???? |
Hmmmm, I wonder..
_________________
ShoBud The Pro 1
YES it's my REAL NAME!
Ezekiel 33:7 |
|
|
|
Lonny Servin
From:
Oregon, WI, USA
|
Posted 25 Aug 2014 2:08 pm
|
|
| I have a pedal for you. $50. |
|
|
|
Marvin Born
From:
Ohio, USA
|
Posted 25 Aug 2014 5:35 pm
|
|
Take the two parts and have it TIG welded.
A good welding shop can handle it.
Marvin |
|
|
|
Lonny Servin
From:
Oregon, WI, USA
|
Posted 25 Aug 2014 5:38 pm
|
|
| I believe it is white metal and can not be welded. |
|
|
|
Al Risbeck
From:
Iowa, USA
|
Posted 26 Aug 2014 5:21 am Pedal
|
|
What size is the shaft ? I have 10 similar off an ZB
_________________
Mullen Discovery, GK mb200 with Eminence EPS-15C, Fender steel King with Eminence EPS-15C,Nashville 400 amp, with EPS-15C,Evans FET500 with Peavey 1501 BW Goodrich L10K V.P.(2),Goodrich L120, Bose L1 PA with ToneMatch 4 Mic control board |
|
|
|
