| Author |
Topic: Alumatone |
Martin Weenick
From:
Lecanto, FL, USA
|
Posted 31 Jul 2014 4:24 am |
|
Anyone know a good starting point for the clearance on a Alumatone Pickup ?? One quarter ? Two quarters ? Any suggestions? Thanks, Martin.
_________________
Several custom steels. NV-112 Boss DD-7 |
|
|
 |
Lane Gray
From:
Topeka, KS
|
Posted 31 Jul 2014 4:44 am
|
|
I've heard between 2 and 3.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Martin Weenick
From:
Lecanto, FL, USA
|
Posted 31 Jul 2014 5:56 am
|
|
Thanks Lane, now, if I can just find someone to loan me two quarters.
_________________
Several custom steels. NV-112 Boss DD-7 |
|
|
|
jay thompson
From:
east peoria, il USA
|
Posted 31 Jul 2014 5:57 am Alumatone
|
|
Martin,
I have Alumatones on three guitars, Emmons LeGrande SKH, Emmons LeGrande II, and a Zum D-10. the pick up frame is set on each guitar at +/- 1/8th inch below the strings, which puts the magnetic strip about 5/32nds below the strings. Super quiet great pickups.
Best regards, Jay Thompson |
|
|
|
Kevin Raymer
From:
Chalybeate, Kentucky, USA
|
Posted 31 Jul 2014 7:30 am
|
|
Martin,
I would most certain give you serveral quarters for that last pedal steel you built.
If you don't have two quarters I'll be glad to help.
_________________
Kevin Raymer
Zum / Knaggs / Breedlove
Fractal Audio |
|
|
|
Jim Priebe
From:
Queensland, Australia - R.I.P.
|
|
|
|
David A. Jones
From:
Bulverde, Texas, USA
|
Posted 5 Aug 2014 6:26 am Alumatone clearance
|
|
Martin,
I recently replaced the BL-705 pickup on my Williams 700 SD-10 keyless with an Alumatone. I set the clearance at the 10th string at 2 quarters and at the 1st string at 3 quarters. I had used the same settings on my Star SD-10 when I replaced the Wallace Truetone with the Alumatone. This seems to cut back the highs produced by it. Hope this helps.
Dave Jones |
|
|
|
