| Author |
Topic: Flags for knee levers? |
Chuck McGill
From:
An hour from Memphis and 2 from Nashville, R.I.P.
|
Posted 16 Jul 2014 6:08 am |
|
Anyone know if someone makes these as an accessory?
Thanks |
|
|
 |
Ron Brennan
From:
Orlando, Florida, USA; Formerly, Edison, NJ
|
Posted 16 Jul 2014 11:39 am
|
|
Chuck,
You might check with the new Steel Guitar of Nashville. http://www.steelguitarsofnashville.com/
Or (877) 937-9758
Vic Lawson has recently taken over our revered Bobbe Seymours Steel Guitar Nashville business and may have the Flags for knee lever's your looking for. This where I got mine from Bobbe sometime back. TX
Rgds,
Ron |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 16 Jul 2014 1:47 pm
|
|
Given that they usually screw on, I'm not sure they come in kit form. You'd have to drill and tap the levers.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Jim Smith
From:
Midlothian, TX, USA
|
Posted 16 Jul 2014 3:42 pm
|
|
| They're just pieces of straight or right angle aluminum. You can make your own easily with a hacksaw, file, and drill. |
|
|
|
Dick Sexton
From:
Greenville, Ohio
|
Posted 16 Jul 2014 3:57 pm Easy to make...
|
|
Held on with Velcro...
 |
|
|
|
Dave Grafe
From:
Hudson River Valley NY
|
Posted 16 Jul 2014 5:35 pm
|
|
| I've got a few here, Chuck, and I can make custom ones as well. PM me if you wish to discuss... |
|
|
|
Chuck McGill
From:
An hour from Memphis and 2 from Nashville, R.I.P.
|
Posted 17 Jul 2014 6:01 am
|
|
Dick that looks great. Where would I get that aluminum.
Dave I just need one on LkL. It's a S body Kline and that outside lever messes with my pedal position. Thanks everyone for the advise. |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 17 Jul 2014 6:25 am
|
|
you can get the aluminum at www.speedymetals.com
They sell it by the inch. |
|
|
|
Dick Sexton
From:
Greenville, Ohio
|
Posted 17 Jul 2014 7:32 am Flag metal...
|
|
| Erv's site is a very good one, but I just went to Lowes. They had what I needed to make several. Aluminum, JB Weld and Industrial strength Velcro. Used a hacksaw and a file, some polish if you want. Not the prettiest, but totally functional and comfortable. |
|
|
|
Chuck McGill
From:
An hour from Memphis and 2 from Nashville, R.I.P.
|
Posted 18 Jul 2014 4:12 am
|
|
I will try Lowes today.
Thanks to all that replied. Oh yeah the fix on the threaded inserts of my legs Erv was spot on brother. |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 18 Jul 2014 7:42 am
|
|
Chuck,
Glad it worked for you.  |
|
|
|
