Author |
Topic: 2001 Jch-d10 8+8 **No Longer Available** |
Mickey Adams
From: Bandera Texas
|
Posted 11 Jul 2014 8:26 am
|
|
Red and Grey JCH D10. One of the very last JCH guitars built. The guitar has had one owner only....Buck Reid...It is the latest model JCH manufactured, and Buck assembled this guitar personally. Although currently it has no vertical levers, the provisions are there and the hardware will come with the guitar to install them, so 8+10 is possible....
The guitar has been meticulously cared for, and is tuned to perfection.
_________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders!
Last edited by Mickey Adams on 20 Jul 2014 10:25 am; edited 6 times in total |
|
|
|
Roger Rettig
From: Naples, FL
|
Posted 11 Jul 2014 10:42 am
|
|
Wow!!! Now there's a guitar I wish I could afford!
And it begs the question - what is Buck going to play now??? _________________ Roger Rettig: Emmons D10, B-bender Teles and Martins - and, at last, a Gibson Super 400!
---------------------------------- |
|
|
|
Mickey Adams
From: Bandera Texas
|
Posted 11 Jul 2014 11:16 am
|
|
ill let Buck tell you...im sure he will chime in...! _________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Alan Bidmade
From: Newcastle upon Tyne UK
|
Posted 11 Jul 2014 11:29 am
|
|
I believe he went shopping for an Infinity - hope to hear it soon! _________________ Ben-Rom #017 'Lorelei', Guild D25, Epiphone 'Joe Pass', Roland 40XL, Hilton VP
First name Alan, but known as Nick |
|
|
|
Roger Rettig
From: Naples, FL
|
Posted 11 Jul 2014 11:34 am
|
|
As Mickey's involved I'd assume that a Mullen is a distinct possibility but I'll be watching this space! _________________ Roger Rettig: Emmons D10, B-bender Teles and Martins - and, at last, a Gibson Super 400!
---------------------------------- |
|
|
|
Buck Reid
From: Nashville,TN
|
Posted 11 Jul 2014 12:01 pm
|
|
Folks this is a wonderful guitar and now belongs to Mickey. I started working with Jimmie in 2000 shortly after he redesigned the changer which consisted of changing the design of the lower scissor to accommodate a longer return spring. This resulted in smoother and easier playability. I would guess and it's only a guess... that there were about 30 of these late model guitars built before Jimmie passed in 2005. I only say this because the second generation of JCH guitars offered a significant improvement mechanically speaking. Tone wise nothing really changed as all of Jimmie's guitars sounded great in my opinion. I've also provided Mickey with two un-used knee lever kits that I intended to install but never did... one standard and one vertical. One might say that this guitar is a piece of history and in top notch condition. _________________ www.BuckReid.com |
|
|
|
Mickey Adams
From: Bandera Texas
|
Posted 11 Jul 2014 12:12 pm
|
|
And there ya have it!... _________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Richard Sinkler
From: aka: Rusty Strings -- Missoula, Montana
|
Posted 11 Jul 2014 2:52 pm
|
|
Mickey Adams wrote: |
And there ya have it!... |
I wish I had it. _________________ Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
chris ivey
From: california (deceased)
|
Posted 11 Jul 2014 4:17 pm
|
|
well, no....that doesn't answer the question, 'what is he going to play now?'.......does it? |
|
|
|
Buck Reid
From: Nashville,TN
|
Posted 11 Jul 2014 5:14 pm
|
|
Chris... no it doesn't. I think that's a different thread. _________________ www.BuckReid.com |
|
|
|
Don Mogle
From: Round Rock, TX, USA
|
Posted 12 Jul 2014 7:55 am Buck's JCH
|
|
Hey Mickey,
Man, what a great guitar!
Given this guitar's recording and live stage history, the fact is was BUILT, OWNED and PLAYED by a steel guitar legend, and one of the last JCH guitars built, why don't you keep it?
I know you probably have several steels, but I'd be hard pressed to let this one go.
Chris: I don't think it matters what Buck ends up playing. He would sound fantastic on any guitar!
Bump for a fine, celebrity-owned steel!
Don |
|
|
|
Mickey Adams
From: Bandera Texas
|
Posted 12 Jul 2014 8:39 am
|
|
Don, a very valid question. I have a beautiful G2, and several other Mullens, and a few assorted straggler guitars...thats no secret. And yes, I agree with you with regards to Bucks talents...I just can't justify keeping them all, and this one is a REAL keeper for sure...We will see if it sells, and if so fine...if not, thats fine too!!... _________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Bill L. Wilson
From: Oklahoma, USA
|
Posted 12 Jul 2014 9:06 am MAN! What a Steel.
|
|
Looking at the under carriage, are the end plates just tad thicker than an Emmons? Which would seem to help a lot with cabinet drop. Nice Guitar, will be lookin' forward to see what Buck comes up with, cause we know it's gonna be good......Whoever ends up with the JCH, is gonna be a Happy Camper! |
|
|
|
Ronald Cid
From: Contrecoeur, Quebec, Canada
|
Posted 12 Jul 2014 10:19 am
|
|
Here's another take on this legendary guitar....it is the last guitar that Buddy Emmons touched in public, in front of an audience. The picture above confirms. RC |
|
|
|
Peter Nylund
From: Finland
|
Posted 12 Jul 2014 10:30 am
|
|
Mr Wilson, why would a thicker endplate reduce the cabinet drop? Don't make sence to a redneck like me. _________________ I know my playing is a bit pitchy, but at least my tone sucks |
|
|
|
Tim Carlstedt
From: Helsingborg, Sweden
|
Posted 12 Jul 2014 12:02 pm
|
|
Why didn't you tell me that the guitar would be for sale when you were in sweden!? I would have bought it from you instantly! Hands down the best guitar I've ever heard or played. Buck was graciuos enough to let me try it. _________________ Tim Carlstedt, Helsingborg, Sweden
--
Fessenden Sd10, Peavey ProFex II, Lil' Izzy Buffer, Fender Steel King, BJS bars. |
|
|
|
Mickey Adams
From: Bandera Texas
|
Posted 12 Jul 2014 12:16 pm
|
|
Tim, at the time the transfer of the guitar to me had not been completed, and Buck nor I was sure that it would. It was just timing I'm afraid. if you would like to PM me, I will be happy to discuss it with you.... _________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Mickey Adams
From: Bandera Texas
|
Posted 12 Jul 2014 6:11 pm
|
|
Bump _________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Kerry Johnson
From: the Bay Area, CA
|
Posted 13 Jul 2014 6:49 pm Jch
|
|
OMG
Nothin like a JCH
~Kerry |
|
|
|
Bill L. Wilson
From: Oklahoma, USA
|
Posted 13 Jul 2014 7:41 pm The Thicker End Plates.
|
|
Peter, I don't know why I thought thicker plates would make a difference in cabinet drop. Now that I think about it, it probably wouldn't change anything. Just a thought in my head, I guess. The JCH does look like a very well built steel though. |
|
|
|
Mickey Adams
From: Bandera Texas
|
Posted 13 Jul 2014 7:55 pm
|
|
The thing is built like a tank....And plays like butter.... _________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Mickey Adams
From: Bandera Texas
|
Posted 16 Jul 2014 7:32 am
|
|
bump up.... _________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Mickey Adams
From: Bandera Texas
|
Posted 16 Jul 2014 8:16 pm
|
|
I've got a minimum price for this guitar.. If you want to make an offer please PM me... _________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Buck Reid
From: Nashville,TN
|
Posted 19 Jul 2014 10:08 am
|
|
I feel like I should make it clear that I wasn't unhappy with this guitar... far from it! I was introduced to the Infinity guitars at the Dallas show in March, played one and fell in love with it. So... after playing the JCH for 13 years, I felt a change would hopefully bring out some new inspiration with regard to writing some new material and playing in general and it's doing just that. Just preference and time for change... that's something I think most of us can relate to.
Bump for a great guitar! _________________ www.BuckReid.com |
|
|
|
Dale Rottacker
From: Walla Walla Washington, USA
|
|
|
|