| Author |
Topic: GEORGE GUARD 112 knob guards. |
George Kimery
From:
Limestone, TN, USA
|
Posted 17 Feb 2014 8:08 am |
|
Last batch at the old price of $15.00, inc. shipping, all sold. I have more made up not painted. Once they are painted they will be ready to ship. Due to increase in postage rates and material costs, the new price will have to be $20.00, inc. shipping. Still a great investment not to worry about breaking off those plastic shaft knobs.
Last edited by George Kimery on 6 Mar 2019 10:24 am; edited 8 times in total |
|
|
 |
Scott Duckworth
From:
Etowah, TN Western Foothills of the Smokies
|
Posted 17 Feb 2014 8:31 am
|
|
I have one of these on my 112, and they are GREAT!
_________________
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus! |
|
|
|
Joe Rouse
From:
San Antonio, Texas
|
Posted 17 Feb 2014 8:37 am George Guards
|
|
| I've got these guards on both of my Nv 112s...well worth the money....jr |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 17 Apr 2014 6:12 am George Guard 112 knob guards...$15.00 inc. shipping
|
|
| I have a few of these left from the last run that are ready to ship. Notice how well the textured epoxy finish blends in with the amp. Hardly noticable. And, should you ever decide to remove it for any reason, there will not be any tell tale screw holes left in your amp. Easy 5 minute or less installation. |
|
|
|
Nathan Guilford
From:
Oklahoma City
|
Posted 17 Apr 2014 7:44 am good product
|
|
Not only was it easy to install, looks good, and works well, it also gives you an extra sturdy handle to grab when moving the amp. AND the D2F cover I have fits over it with no problem at all.
Great product. Got a NV112? Gotta have it!
_________________
'02 Carter S-12 uni
‘76 MSA D-12
www.toothbrushers.com |
|
|
|
Scott Duckworth
From:
Etowah, TN Western Foothills of the Smokies
|
Posted 17 Apr 2014 11:47 am
|
|
I have the Steel Guitar Nashville cover and it fits well. with the guard.
_________________
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus! |
|
|
|
Glenn Porter
From:
Texas
|
Posted 17 Apr 2014 3:43 pm
|
|
George I will order 2. Paypal for $30.00 being sent.
Thanks,
Glenn |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 17 Apr 2014 5:33 pm George Guard 112 knob protectors...$15.00 including shipping
|
|
I left the .com off of my PayPal account. The full and correct PayPal account is zumsteeld10@gmail.com
Thank you guys that have bought one of the guards and took the time to praise it. That was super nice and I appreciate it.
George
Last edited by George Kimery on 22 Dec 2018 7:31 am; edited 1 time in total |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 17 Apr 2014 10:37 pm
|
|
Do you have them for the 400 Limited?
I really think that cutfront (to borrow and retool an Emmons term) was a boneheaded idea.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 18 Apr 2014 5:19 am George Guard 112 knob guards...$15.00 including shipping
|
|
Lane, unfortunately, I do not have a 400 here to see if they will work or not. They will not work on a 1000 because the corners are different. I doubt that the 400 has a cut-out and corner's EXACTLY like the 112. If it does and I have the measurements of the center to center of the front holes on the corners, then I could make one for a 400.
Thanks for asking. |
|
|
|
Tucker Jackson
From:
Portland, Oregon, USA
|
Posted 18 Apr 2014 10:54 am
|
|
The 112 knobs have weak plastic posts and will snap right off with light force. After I broke a couple of knobs on my amp because it was packed too tightly in the band van, I got one of George's guards.
This is a wonderful, inexpensive solution. Installs in three minutes and provides hardcore protection. I've put it through its paces for a couple of years now and it's been great. If you own a 112 that you take into the trenches or transport shoved up against other gear, a guard is a must. |
|
|
|
Kenny Howard
From:
Salem, OR
|
Posted 18 Apr 2014 9:24 pm
|
|
| If you have any more, Id like one. |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 19 Apr 2014 6:20 am George Guard 112 knob guards..$15.00 inc. shipping
|
|
| Kenny, I have 3 left, so one of them is yours. Two more left. When they are gone, I will make another batch in a few weeks. |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 21 Apr 2014 12:07 pm George Guard 112 knob guards...$15.00 including shipping
|
|
This batch is all gone. I will be making up anothr batch in a few weeks and posting when they are ready to ship. If you want me to notify you, send me an e-mail. You can also order one by sending me $15.00 to my PayPal e-mail address. Just understand that it will not be shipped for a few weeks when I make up another batch.
Thanks for the orders and for the good words about the guard. |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 21 May 2014 3:45 pm George Guard Nashville 112 knob guards..$15.00 inc. shipping
|
|
I just finished another batch of the knob guards for the 112 amps. Ready to ship immediately. Will be shipped USPS first class mail free of charge to the lower 48 states. PayPal $15.00 to my e-mail (PayPal) account: zumsteeld10@gmail.com If you don't do PayPal, let me know and we can go another route.
You really do need one of these for the 112 before you bump a knob and break it off or knock the amp over. That is going to cost you a bunch of $ to get fixed. Never have to worry about it again for $15.00. The guard really blends in and looks like it came factory installed.
Last edited by George Kimery on 22 Dec 2018 7:33 am; edited 1 time in total |
|
|
|
Marty Letz
From:
Iowa City, Iowa, USA
|
Posted 22 May 2014 8:02 am
|
|
| Need your address and I'll send you a money order. My email is martyletz@ aol.com. Thanks |
|
|
|
Ron Frederiksen
From:
Van Buren, Arkansas, USA
|
Posted 23 May 2014 4:15 am
|
|
| Guess I can start lookin for mine any day now. I will keep an eye on the mail-lady. Paid thru Pay Pal April 23rd. Thanks, Ron |
|
|
|
Jim Saunders
From:
Houston, Texas, U.S.A.
|
Posted 23 May 2014 5:41 am George Guard
|
|
| I got mine several months ago and I'm quite happy with it. I was reluctant at first to "alter" my amp, in that I like things stock. But, this guard really looks like it was made on the amp. Blends perfectly and does it's job. |
|
|
|
Mitch Druckman
From:
Arizona, USA
|
Posted 23 May 2014 8:01 am
|
|
| I just sent you $15.00 for a knob guard. Thanks. |
|
|
|
Kenny Howard
From:
Salem, OR
|
Posted 23 May 2014 8:52 am Knob guard
|
|
Purchased mine a month ago. Arrived in the mail in just a couple days.
Quick & easy install. Looks like it came from the factory. Definitely worth the peace of mind. |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 26 May 2014 9:08 am George Guard 112 knob guard...$15.00 inc. shipping
|
|
Thank everyone for your testimonials. I am glad that you like the guards and that they are doing their job.
I only have two left as of 5/26. I will be making more in a couple weeks after these last two are gone.
George |
|
|
|
Lynn Martin
From:
SunPrairie WI 53590 U.S.A.
|
Posted 27 May 2014 1:49 pm knob guards
|
|
| paypal for $ 30 sent this morning. |
|
|
|
Ron Frederiksen
From:
Van Buren, Arkansas, USA
|
Posted 28 May 2014 11:02 am
|
|
| Got mine today and am a happy camper. Good job George. Any one with a 112 needs this little ditty right now to protect them knobs, buttons and switches... Thanks, Ron |
|
|
|
Lynn Martin
From:
SunPrairie WI 53590 U.S.A.
|
Posted 1 Jun 2014 8:39 am Knob Guards
|
|
| Mine arrived yesterday. Great product at a great price. Thanks George!!! |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 19 Jun 2014 6:38 pm George Guard Nashville 112 knobguards..$15.00 inc. shipping
|
|
I have another batch of the knob guards ready to ship. If you would like one, just PayPal me $15.00 to zumsteeld10@gmail.com and I will get you one right out.
Thanks.
George
Last edited by George Kimery on 22 Dec 2018 7:34 am; edited 1 time in total |
|
|
|
