| Author |
Topic: Blanton S10 - SOLD on Ebay, Please Close. |
Jim Williams
From:
Meridian, Mississippi, USA - Home of Peavey!
|
Posted 14 May 2014 7:01 am |
|
I've decided just to put this up for sale. It is a Blanton single 10, 4 pedals no levers. The guitar is in pretty good condition appearance wise and plays and sounds great. These guitars are very easy to set up. The weight is around 50 pounds. Jim Flynn here on the forum informs me that he can make most any part on it including a kit to add levers. I have done some more cleaning since the photos here were made so it actually looks better now. Pedals are currently tuned to Emmons on first three and fourth pedal is not set to anything at the moment. I will set it to whatever you want that I can do with two ballcranks and rods. If you like I will reconfigure all 4 pedals to your specs for an additional $50, once again within the limits of two bellcranks / rods per pedal and the limits of the changer. The strings are new. A hard case is included but one end is damaged and needs to be repaired...it can be used as is though.
_________________
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal.
Last edited by Jim Williams on 4 Jun 2014 7:03 am; edited 11 times in total |
|
|
 |
Nathan Hofer
From:
Columbia, Missouri
|
Posted 14 May 2014 11:10 am
|
|
Hi Jim,
Sent you an email. |
|
|
|
Jim Williams
From:
Meridian, Mississippi, USA - Home of Peavey!
|
Posted 21 May 2014 1:07 pm
|
|
Bump for straight sale price including shipping.
_________________
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal. |
|
|
|
Doug Jones
From:
Oregon & Florida
|
Posted 21 May 2014 8:32 pm
|
|
| Interesting bellcranks. Looks like all it takes to adjust travel and balance pulls is a screwdriver! |
|
|
|
Jim Williams
From:
Meridian, Mississippi, USA - Home of Peavey!
|
Posted 21 May 2014 8:41 pm
|
|
Doesn't even take a screwdriver...heads have knurled screws...adjust with your fingers. Extremely easy to tune and it stays tuned.
_________________
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal. |
|
|
|
Jim Williams
From:
Meridian, Mississippi, USA - Home of Peavey!
|
Posted 24 May 2014 7:58 am
|
|
Bump...PRICE REDUCED TO $750 Shipped!
_________________
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal. |
|
|
|
Daniel McKee
From:
Corinth Mississippi
|
Posted 24 May 2014 9:55 am
|
|
| Do you have any pictures of it from the front? |
|
|
|
Jim Williams
From:
Meridian, Mississippi, USA - Home of Peavey!
|
Posted 24 May 2014 8:20 pm
|
|
Yes, here are some from the front, after a little more cleaning and polishing. The closeup shows a couple of small rust spots in the finish.
_________________
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal. |
|
|
|
Jim Williams
From:
Meridian, Mississippi, USA - Home of Peavey!
|
Posted 27 May 2014 12:49 pm
|
|
Bump....lower price...other trade options.
_________________
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal. |
|
|
|
Larry Waisner
|
Posted 30 May 2014 10:19 am Blanton
|
|
Hi Jim,
I sent you an email and pm with my phone number. Give me a call please.
Larry |
|
|
|
Jim Williams
From:
Meridian, Mississippi, USA - Home of Peavey!
|
Posted 1 Jun 2014 6:50 am
|
|
Bump - Reduced to $500 plus actual shipping cost.
_________________
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal. |
|
|
|
