Author |
Topic: Livesteel Strings |
Mike Sweeney
From: Nashville,TN,USA
|
Posted 12 May 2014 8:38 am
|
|
I just wanted to share my thoughts on Livesteel Strings with everybody which, I realize my opinion and 2 bucks will get you a cup of coffee. But at the same time, Being a life long steel guitar player and still a working full time musician who has used every string out there I think I have a pretty good handle on this subject.
I've been using Livesteel Strings since Sid came out with them in 2012 and I figured now would be a good time to tell you my take on them.
After two years I'm still in awe of the service I get from Livesteel Strings. Not only the tremendous tone they provide, but also the intonation is spot on up the neck from set to set. And, the longest life of any string I've ever used. No breakage either. I think Livesteel Strings are the best thing to come along for steel guitar in my lifetime.
Before anybody says, " I get them for free because I'm a Nashville player ". Nothing could be further from the truth. I buy mine just like anybody else. And I feel it's the best ongoing investment I make for my sound.
If you haven't tried Livesteel's yet you owe it to yourself to give them a try. Order online or give them a call and talk to Jordan.
The Hudson family are great folks.
Thanks Sid for a great string. _________________ Zumsteel steel guitars, Telonics and Peavey amplifiers, GHS strings.
Last edited by Mike Sweeney on 14 May 2014 4:08 am; edited 2 times in total |
|
|
|
Curt Trisko
From: St. Paul, Minnesota, USA
|
Posted 12 May 2014 8:51 am
|
|
I'm no connoisseur, but I can tell you that they ship them quickly. |
|
|
|
Lane Gray
From: Topeka, KS
|
Posted 12 May 2014 9:20 am
|
|
I ordered a set last Tuesday or Wednesday, and they beat me home (I get home Saturday morning).
The nickel set sounds just fine on my dobro. _________________ 2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Kevin Mincke
From: Farmington, MN (Twin Cities-South Metro) USA
|
Posted 12 May 2014 10:30 am
|
|
So was it the strings or the player Mike on the work you did for our friend Sarah Barker? I was down to Tulsa and laid some pedal steel on Pony & accordion on Los Gatos, deporte'
Your playing was great BTW |
|
|
|
George Duncan Sypert
From: Colo Spgs, Co, USA
|
Posted 12 May 2014 10:45 am Strings
|
|
Mike what is the composite of the strings you like the best, Nickel, Stainless, or just whatever it might me. I am thinking of trying another brand and appreciate your input.
Thanks, George
Email me direct if you want to. |
|
|
|
Mike Sweeney
From: Nashville,TN,USA
|
Posted 12 May 2014 10:54 am
|
|
I use stainless. Some guys like nickel best some the cryo. My advice would be try them all and decide for yourself. _________________ Zumsteel steel guitars, Telonics and Peavey amplifiers, GHS strings.
Last edited by Mike Sweeney on 14 May 2014 4:09 am; edited 1 time in total |
|
|
|
Mike Sweeney
From: Nashville,TN,USA
|
Posted 12 May 2014 10:58 am
|
|
Kevin,
Yes I did play on a project cut here and did some overdubs on stuff cut in Tulsa. Gonna do some more for her in a couple weeks. _________________ Zumsteel steel guitars, Telonics and Peavey amplifiers, GHS strings. |
|
|
|
Jason Lynch
From: Essex, United Kingdom
|
Posted 12 May 2014 10:59 am
|
|
I've just put a set on mine. My lord, they're fantastic so far. I'm a covert. |
|
|
|
Mark Lawrence
From: Greenfield, Indiana, USA
|
Posted 12 May 2014 2:58 pm
|
|
I've been using live strings for almost a year now and not one string breakage yet. and I play/practice every day. I decided on my last change to see how long these strings will go. So far, two and half months later they still sound great! I'm beginning to think that these strings are unbreakable. |
|
|
|
Billy Knowles
From: Kenansville, N. C. 28349 usa
|
Posted 12 May 2014 8:10 pm Live Steel
|
|
Great Strings!!!!!!!!!!!!!!!!!!!!!!!!! _________________ Billy Knowles
STEEL GUITAR EAST
Emmons authorized dealer and approved service technician
my web site: http://www.steelguitareast.com |
|
|
|
Will Cowell
From: Cambridgeshire, UK
|
Posted 13 May 2014 12:23 am
|
|
Me too, Jason - just bought two sets of stainless and fitted them yesterday after the Barnham Steelies get-together. Superb tone, I thought SIT were good, they had great tone after a long time on the guitar and no breakages, so Live Steel has a tough act to follow, but the omens are good already! _________________ Williams 700 series keyless U12,
Sierra keyless U14, Eezzee-Slide & BJS bars
Moth-eaten old Marshall 150 combo
Roland Cube 80XL, Peterson Strobo+HD,
EarthQuaker Despatch Master for reverb / delay |
|
|
|
Geoff Noble
From: Scotland
|
Posted 13 May 2014 1:46 am
|
|
I bought U12 set's of Nickel and Stainless last November to see which I liked best.
I put the Nickel on first and they're still going strong, so haven't tried the Stainless yet.
I did break a 3rd string last week, broke at the changer end, so just put on a spare as the others still sound good and keep decent tune.
I'm looking forward to trying the Stainless to see what the difference is, damn the longevity of these strings
But I noticed the difference straight away from other brands I've used before when I put the Nickel set on, the strings seemed "settled" right away. Didn't seem to have the initial over brightness dying down over the first week of playing. The tone has stayed pretty much the same from day 1 until now.
I have cleaned the strings a couple of times when the tone has started to lose it's edge and this seems to work well for quite some time before I need to do it again.
I'm not gigging but I play almost every night for at least 2 hours, so they're getting plenty of use.
Great strings _________________ "Nothing can ever be wrong about music" - D Allman
"There is no bad music, only music you don't like" - Me
YTube- http://www.youtube.com/channel/UCFqsA-Ahlgr2Z2sw71WJHGg/videos
SCloud - https://soundcloud.com/just-jef/tracks |
|
|
|
Jason Putnam
From: Tennessee, USA
|
Posted 13 May 2014 5:18 am
|
|
+1 for the stainless. I tried the nickel when I had my stage one and didn't like them as well. _________________ 1967 Emmons Bolt On, 1995 Mullen PRP 3x5,Nashville 112, JOYO Digital Delay, Goodrich Volume Pedal, Livesteel Strings |
|
|
|
David Graves
From: Indiana, USA
|
Posted 13 May 2014 5:35 am
|
|
Mike, I'm more known as a lead guitar player and decided to try a set of singles on my lead outfit. I had been using nothing but D'Addarios for the last 25 years! I was pleasantly blown away with the tone, life, and brilliance of the LSS. In fact, I called Sid and bugged the bejesus out of him until he started to offer a 6 string set for electric guitar. They are incredible in every aspect. Of course, we all know about the incredible service, well the tone and life matches it. _________________ St. Blues 1984 "Holy Grail"
Take the time to introduce someone young to music... and play a few songs with someone old. |
|
|
|
Mike Sweeney
From: Nashville,TN,USA
|
Posted 13 May 2014 9:04 am
|
|
Sid's an amazing guitar player also so, he knows what guitar players want too. Glad to see so many glowing reports. I'm sure Sid is too. _________________ Zumsteel steel guitars, Telonics and Peavey amplifiers, GHS strings. |
|
|
|
Jim Williams
From: Meridian, Mississippi, USA - Home of Peavey!
|
Posted 13 May 2014 12:26 pm
|
|
I recently tried a couple of custom sets for my C6 6 string lap steels...nice strings with a very good bright sound and the shipping / service speed was outstanding. _________________ GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal. |
|
|
|
Hook Moore
From: South Charleston,West Virginia
|
|
|
|
Larry Baker
From: Columbia, Mo. U.S.A.
|
Posted 13 May 2014 2:52 pm
|
|
Great strings, great service. I use the stainless standerd sets. _________________ Mullen G2 SD10 3 & 5 The Eagle
NV112 amp===Earnie Ball V.P. |
|
|
|
Mike Sweeney
From: Nashville,TN,USA
|
Posted 14 May 2014 4:04 am
|
|
There you go folks! _________________ Zumsteel steel guitars, Telonics and Peavey amplifiers, GHS strings. |
|
|
|
Mike Sweeney
From: Nashville,TN,USA
|
Posted 14 May 2014 9:18 pm
|
|
How did part of my title get gone?
_________________ Zumsteel steel guitars, Telonics and Peavey amplifiers, GHS strings. |
|
|
|
David Graves
From: Indiana, USA
|
Posted 14 May 2014 9:35 pm
|
|
Times are tough Mike. Their making cutbacks everywhere!! _________________ St. Blues 1984 "Holy Grail"
Take the time to introduce someone young to music... and play a few songs with someone old. |
|
|
|
Richard Sinkler
From: aka: Rusty Strings -- Missoula, Montana
|
Posted 14 May 2014 10:03 pm
|
|
I switched to Sid's strings when Jagwires became impossible to get. I had a bad attitude about having to switch, but I'm glad I did. Since I don't have to do any C6th work in the main band I am in, I have not changed my C6 strings in a while. The strings toward the changer are pure black from my arm resting on them. But they still sound good enough to pull off a gig. That tells me a lot about the quality and value these strings offer. You're going to have to pay me to switch, and it won't be cheap. _________________ Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Mike Sweeney
From: Nashville,TN,USA
|
Posted 22 May 2014 6:27 am
|
|
_________________ Zumsteel steel guitars, Telonics and Peavey amplifiers, GHS strings. |
|
|
|
Mike Sweeney
From: Nashville,TN,USA
|
Posted 22 May 2014 6:28 am
|
|
_________________ Zumsteel steel guitars, Telonics and Peavey amplifiers, GHS strings. |
|
|
|
Mike Sweeney
From: Nashville,TN,USA
|
Posted 22 May 2014 6:29 am
|
|
_________________ Zumsteel steel guitars, Telonics and Peavey amplifiers, GHS strings. |
|
|
|