| Author |
Topic: MB200 to speakers |
James Yoder
From:
Texas, USA
|
Posted 11 May 2014 3:33 am |
|
| I'm running a MB200 with a RP155 & a Jensen C12K. I built the cabinet for the speaker mounted the MB200 on top. Very light weight, about 20 pounds. Getting a lot of good sounds. I play a Mullen G2, Ex 12. Don;t like my Nashville 1000 anymore. |
|
|
 |
Malcolm McMaster
From:
Beith Ayrshire Scotland
|
Posted 11 May 2014 8:36 am
|
|
Probably along the lines of mine, great lightweight setup.
_________________
MSA Millenium SD10, GK MB200, Sica 12inch cab, Joyo American Sound Pedal/ Jay Ganz Straight Ahead amp, Telonics 15inch in Peavey cab, Digitech RP150, Peterson tuner.Hilton volume pedal.Scott Dixon seat and guitar flight case. |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 11 May 2014 10:54 am
|
|
| I have my MB200 separate and just sit it on top of my speaker cabinet. I'm using an Eminence EPS-15C speaker. |
|
|
|
Ken Campbell
From:
Ferndale, Montana
|
Posted 11 May 2014 12:08 pm Re: MB200 to speakers
|
|
| James Yoder wrote: |
| I'm running a MB200 with a RP155 & a Jensen C12K. I built the cabinet for the speaker mounted the MB200 on top. Very light weight, about 20 pounds. Getting a lot of good sounds. I play a Mullen G2, Ex 12. Don;t like my Nashville 1000 anymore. |
Id like to see a picture if you get a chance. |
|
|
|
James Yoder
From:
Texas, USA
|
Posted 11 May 2014 12:54 pm MB200 to speakers
|
|
Here you are Ken.
 |
|
|
|
Malcolm McMaster
From:
Beith Ayrshire Scotland
|
Posted 11 May 2014 1:18 pm
|
|
James I have the Sica in mine, how do you find the Jennsen, and what is it rated output wise?
_________________
MSA Millenium SD10, GK MB200, Sica 12inch cab, Joyo American Sound Pedal/ Jay Ganz Straight Ahead amp, Telonics 15inch in Peavey cab, Digitech RP150, Peterson tuner.Hilton volume pedal.Scott Dixon seat and guitar flight case. |
|
|
|
James Yoder
From:
Texas, USA
|
Posted 11 May 2014 2:00 pm MB200 to speakers
|
|
| Malcolm the Jensen is rated 100 watts @ 4 ohms. Handles the MB200 well. I set my highs clear off, next knob 8 o clock, high mid 3 o clock & bass all the way on. Now I'm building 2 speaker boxes @ 8 ohms to get my 4 ohm match. That way I will run one of my speakers like 10 t0 20 feet from me . The band always says they can't hear me enough. |
|
|
|
Tom Wolverton
From:
Carpinteria, CA
|
Posted 11 May 2014 7:40 pm
|
|
My rig, MB200, Justice cabinet with 12" Peavey BW. Works great. Fits on those small stages, too.
_________________
To write with a broken pencil is pointless. |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 12 May 2014 2:30 am
|
|
Here is the speaker I built to use with my MB200. It is the same size as a Nashville 112 but 1" taller to accommodate the 15" speaker.
 |
|
|
|
James Yoder
From:
Texas, USA
|
Posted 12 May 2014 2:51 am MB200 to speakers
|
|
| Tom& Jack what do your speaker & cabin weigh total? MB200 is a lot more popular than I thought. |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 12 May 2014 3:52 am
|
|
Mine weighs 23 lbs, according to my bathroom scale.
The speaker cabinet is made of 1X (3/4") pine. The speaker baffle is 1/2" plywood. 1/2" plywood is OK with the light weight Eminence EPS 15C speaker. |
|
|
|
Malcolm McMaster
From:
Beith Ayrshire Scotland
|
Posted 12 May 2014 6:27 am
|
|
James mine weighs in at 21lbs.If you do search on forum there is a pretty big thread by Steve English on the MB 200.
_________________
MSA Millenium SD10, GK MB200, Sica 12inch cab, Joyo American Sound Pedal/ Jay Ganz Straight Ahead amp, Telonics 15inch in Peavey cab, Digitech RP150, Peterson tuner.Hilton volume pedal.Scott Dixon seat and guitar flight case. |
|
|
|
