| Author |
Topic: Gone |
Tommy Everette
From:
Whitakers, NC
|
Posted 28 Apr 2014 3:48 am |
|
Gone
Last edited by Tommy Everette on 27 May 2014 10:48 am; edited 22 times in total |
|
|
 |
Sonny Jenkins
From:
Texas Masonic Retirement Center,,,Arlington Tx
|
Posted 28 Apr 2014 5:52 am
|
|
| I would think it would be difficult for someone to know if they are interested or not without a price,,,or some indication of a value expected????,,,and maybe more description,,,age,,,pedal/knee levers,,,copedent,,,etc,,, |
|
|
|
Tommy Everette
From:
Whitakers, NC
|
Posted 28 Apr 2014 6:20 am
|
|
Gone
Last edited by Tommy Everette on 27 May 2014 10:52 am; edited 9 times in total |
|
|
|
David Higginbotham
From:
Lake Charles, Louisiana, USA
|
Posted 28 Apr 2014 6:56 am
|
|
I will chime in and say that I had this guitar last year. I received it basically a basket case with an unusual tuning setup with 4 pedals and 3 knees. A previous owner had used a lithium grease type of lubricant which gummed up all the undercarriage and cross shafts and it had a negative impact on the finish of the underside of the body. I completely dismantled the guitar, cleaned and polished all parts, sanded and re-lacquered the underside of the body, made new pull rods, added new bell cranks, and reassembled and lubed all the parts. I then did some trading with a close friend and forum member who actually did the rodding and setup on this Fessy. The serial number sticker was torn and had to be removed when I sanded the body. I wrote the number in black marker and applied another coat of lacquer. I didn't allow enough drying time and the marker smeared a little with the next coat. Two of the pedals have a corner cut on them and I received it this way. I was told that a previous owner did this so as not to accidentally touch the next pedal when engaging. I was told he got that idea from John Hughey doing the same early on in his career. Don't know if that is accurate or not. But the person I purchased it from purchased it from the family of a deceased player.
The pickup is an early model 712 and wound to 28K if memory serves me correctly. I will say that this is a fine steel and it plays very well with amazing tone and sustain. I would compare the tone of the pickup with the original 705 and it's very easy to make changes on the guitar. I don't think anyone getting this steel will be disappointed!!!
Dave |
|
|
|
Tommy Everette
From:
Whitakers, NC
|
Posted 28 Apr 2014 7:22 am
|
|
| Thanks Dave |
|
|
|
Tommy Everette
From:
Whitakers, NC
|
Posted 28 Apr 2014 12:25 pm
|
|
Thanks for all the replies.
Some nice stuff.
Send pics to chicknpickr@yahoo.com
Last edited by Tommy Everette on 28 Apr 2014 2:50 pm; edited 1 time in total |
|
|
|
Gary Watkins
From:
Bristol, VA
|
Posted 28 Apr 2014 12:49 pm
|
|
email sent
_________________
If you succeed in cheating someone, don't think that the person is a fool. It's just that the person trusted you far more than you deserved. |
|
|
|
Tommy Everette
From:
Whitakers, NC
|
Posted 29 Apr 2014 6:28 am
|
|
| Ttt |
|
|
|
Tommy Everette
From:
Whitakers, NC
|
Posted 30 Apr 2014 1:35 pm
|
|
Id trade for a super pro or similar D10
Last edited by Tommy Everette on 27 May 2014 8:59 am; edited 3 times in total |
|
|
|
Ryan Quinn
From:
Northampton, MA
|
Posted 1 May 2014 6:09 pm
|
|
Any interest in a trade for an SD-10 Fessy? 3x4, same color, with a Tonealigner pickup. If it's anything you might be interested in, I could send pics early next week.
_________________
Fessenden SD-10, Long-Scale Fender 400, Short-Scale Fender 1000 |
|
|
|
