| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Fitting Telonics speaker in Peavey Nashville 112
Reply to topic
Author Topic:  Fitting Telonics speaker in Peavey Nashville 112
Nick Waugh


From:
United Kingdom
Post  Posted 27 Apr 2014 3:17 am    
Reply with quote

Hi All

I have heard such good things about Telonics speakers that I want to install one in my Peavey Nashville 112. Can anyone advise me about this? Is the job straight forward or are there gong to be complications?

Thanks

Nick
View user's profile Send private message Send e-mail
Jay Ganz


From:
Out Behind The Barn
Post  Posted 27 Apr 2014 5:12 am    
Reply with quote

In another thread, Howard Parker said he put the Telonics 12" in his NV 112 with no problem.
They are amazing speakers. Dave Beatty and his crew did a ton of research developing them.
_________________
Straight Ahead 500 watt mini~power amp
View user's profile Send private message Send e-mail Visit poster's website
Howard Parker


From:
Maryland
Post  Posted 27 Apr 2014 5:22 am    
Reply with quote

Yes...drop in replacement. You'll need the 4 ohm Telonincs.

h
_________________
Howard Parker

03\' Carter D-10
70\'s Dekley D-10
52\' Fender Custom
Many guitars by Paul Beard
Listowner Resoguit-L
View user's profile Send private message Send e-mail Visit poster's website
Nick Waugh


From:
United Kingdom
Post  Posted 27 Apr 2014 9:27 am    
Reply with quote

Thanks Guys.
View user's profile Send private message Send e-mail
Doug Earnest


From:
Branson, MO USA
Post  Posted 27 Apr 2014 1:11 pm    
Reply with quote

The only tricky thing is getting the nuts started back on the studs. Start with any one and work your way around the speaker one at a time tightening them a little at a time. It's pretty much impossible to get them all started at once.

I have had the Telonics speaker in my 112 for a couple of months now and I really do like it a lot. The speaker and upgraded chips have made it a very good sounding amplifier.
View user's profile Send private message Send e-mail
Nick Waugh


From:
United Kingdom
Post  Posted 27 Apr 2014 11:48 pm    
Reply with quote

Upgraded chips?
View user's profile Send private message Send e-mail
David Nugent

 

From:
Gum Spring, Va.
Post  Posted 28 Apr 2014 3:14 am    
Reply with quote

The chip kit upgrade is available from Ken Fox, (see his Forum post). A rather easy task and makes a marked difference IMO...Just a thought: If you decide to perform the chip upgrade, may want to do the speaker swap at the same time. Having the chassis removed should make the new speaker install much simpler.
View user's profile Send private message
Jack Stoner


From:
Kansas City, MO
Post  Posted 28 Apr 2014 3:51 am    
Reply with quote

I would upgrade the chips first. May not need a new speaker. I've installed the OPA2134's in my NV112 and I don't think a new speaker is needed.
View user's profile Send private message Send e-mail
Doug Earnest


From:
Branson, MO USA
Post  Posted 28 Apr 2014 5:01 am    
Reply with quote

A new speaker is not needed, but it makes a world of improvement. I was kind of skeptical myself, but not now.
View user's profile Send private message Send e-mail
Doug Earnest


From:
Branson, MO USA
Post  Posted 28 Apr 2014 5:01 am    
Reply with quote

A new speaker is not needed, but it makes a world of improvement. I was kind of skeptical myself, but not now.
View user's profile Send private message Send e-mail
Roger Francis

 

From:
kokomo,Indiana, USA
Post  Posted 28 Apr 2014 5:50 am    
Reply with quote

I noticed more of an improvement with the telonics speaker than i did with the chip upgrade, but both are what this amp needed, i had the 1201-8 before the telonics witch is my sencond choice of speakers for this amp and i really didnt notice much volume loss at all with the 8 ohm, ive had the telonics 4 ohm in mine for about 8 months now but at the time they wasn offering the 8 ohm
_________________
Rittenberry SD10, 2 nashville 112s with telonics speaker, behringer EPQ450 power amp, 705 pups, Telonics FP-100, live steel strings, mogami cords, wet reverb
View user's profile Send private message Send e-mail
Lyle Clary

 

From:
Decatur, Illinois, KC9VCB
Post  Posted 1 May 2014 3:51 pm    
Reply with quote

While we are kinda on the subject of the Fox Chips, what difference was I supposed to hear with these 74 year old ears? I put them in a few years ago and I guess there was little difference in the sound.
_________________
2006 Zum D10 8x8,1969 ZB Custom D10,
10 3x4 Peavey Nashville 112 Peavey LTD 400 2014 Zum Encore Wood Grain 4x5 Stage One pot pedal
View user's profile Send private message Send e-mail
Bill Ferguson


From:
Milton, FL USA
Post  Posted 1 May 2014 4:18 pm    
Reply with quote

Strange.
I played directly into a NV112, no effects except internal reverb, pot volume pedal and my Carter, at the Dallas show. Roy Rosetta, Doug Jernigan and Tommy Dodd all told me that I had the best tone on the show ( did not say I picked the best).

I believe that Peavey did the proper research and designed this amp where you can get the best tone possible, stock.

Oh yes, Tommy White played directly into one of my NV112's in St Louis and his tone was killer. I will post an excerpt next week for you to hear.

That said, I guess it is to each his own. Tone is very subjective.
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron