| Author |
Topic: New Asher-Akaka lap steel |
Andy Volk
From:
Boston, MA
|
Posted 26 Feb 2014 3:10 pm |
|
Bill Asher is collaborating with master Hawaiian steeler Alan Akaka on a new signature model. Here's a sneak peak ...
_________________
Steel Guitar Books! Website: www.volkmediabooks.com |
|
|
 |
Ron Whitfield
From:
Kaaawa, Hawaii, USA
|
Posted 26 Feb 2014 3:15 pm
|
|
| Let's hope the thickness seen in the pic remains for most part on the end model. |
|
|
|
Rick Barnhart
From:
Arizona, USA
|
Posted 26 Feb 2014 3:15 pm
|
|
Should be tasty...an 8 string Asher  awesome
_________________
Clinesmith consoles D-8/6 5 pedal, D-8 3 pedal & A25 Frypan, Pettingill Teardrop, & P8 Deluxe. |
|
|
|
Bill Asher
From:
Los Angeles, California, USA
|
Posted 26 Feb 2014 8:56 pm Koa, Ebony, and Mahogany oh my, this is going to be superb!
|
|
 |
|
|
|
Don Griffiths
From:
Steelville, MO
|
Posted 26 Feb 2014 10:30 pm
|
|
I was quite impressed with the one Cindy Cashdollar plays.
_________________
Shobud Pro1,BMI U12, Santa Cruz F, PRS Standard, Fender Twin Reverb, ‘53 000-28 |
|
|
|
Tom Pettingill
From:
California, USA (deceased)
|
|
|
|
George Piburn
From:
The Land of Enchantment New Mexico
|
Posted 27 Feb 2014 6:10 am Great Master Series Builds - Fantastic!
|
|
What a Great Boost to Master Class Steel Guitars - Players - and the Art Form in General.
Both the Builder and Endorser are doing so much to extend the life span of Steel Guitar in the Hawaiian Tradition -- Bravo !  |
|
|
|
Mitch Druckman
From:
Arizona, USA
|
Posted 27 Feb 2014 7:53 am
|
|
I've always associated Asher electric steels with the blues and rock communities. I can't wait to hear his take on a Hawaiian guitar.
Have you decided on a pickup? |
|
|
|
Jerome Hawkes
From:
Fayetteville, North Carolina, USA
|
Posted 27 Feb 2014 8:29 am
|
|
wow - this is going to be sweet. i too, have associated his electo hawaiian models with more of the slide guitar crowd (i never see anyone play hawaiian on them) - its nice to see he and alan design this.
i figured his guitars were cnc - nice to know how handmade they really are in this age.
_________________
'65 Sho-Bud D-10 Permanent • '54 Fender Dual-8 • Clinesmith T-8 • '38 Ric Bakelite • '92 Emmons D-10 Legrande II |
|
|
|
Bill Asher
From:
Los Angeles, California, USA
|
Posted 27 Feb 2014 8:36 am Pickup choice.
|
|
After much discussion with Alan and learning more about the desired tone for Hawaiian steel guitar music we agreed the best option would be a low impedance EMG pickup system. This will deliver lots of clean headroom, deep low end response, and a quiet studio quality no-noise signal. This pickup will have a push-pull pot for two different output levels and will sound great going into your amp of choice, or direct into a PA or recording console.
Here are some more technical specs:
If you're using a Low-B or C String there's no sense in even trying a passive pickup.The EMG 707TW Active Pickup delivers the clearest, fattest low end you've ever felt from a guitar pickup. The 707 is Alnico Loaded and the coils are summed separately keeping the DC resistance down and doubling the low end frequency response. Translated...that means the low frequency response is more natural sounding. Full, but not muddy. In addition, the dual-coil section has a wide aperture for plenty of string sampling.
The resonance frequency of the dual-coil mode is 2300 Hz. In the single-coil mode, the pickup resonance switches up to 3900 Hz and operates in a "stack" mode truly resembling a single coil pickup, not a "tapped" humbucker. Still loaded with Alnico, the single coil sound is as pure as it comes. Dual internal preamps (one tuned for single-coil mode and the other for dual-coil mode) give the 707TW two distinct sounds for two pickups in one, while delivering EMG's well-known low-noise performance in both modes. |
|
|
|
Dave Broyles
From:
Olympia,WA USA
|
Posted 27 Feb 2014 10:01 am
|
|
I use active EMGs in my steels as well. I love them. Great frequency response low to high, no noise. They respond well to dynamics, never losing fullness when playing quiet or sound raspy when digging in. Not a vintage type sound but good for rock, country and swing. I don't play Hawaiian style, but would imagine they'd sound great for that.
David |
|
|
|
Mark Eaton
From:
Sonoma County in The Great State Of Northern California
|
Posted 27 Feb 2014 10:11 am
|
|
EMG, one of our outstanding local companies here in Santa Rosa!
_________________
Mark |
|
|
|
Jack Aldrich
From:
Washington, USA
|
Posted 27 Feb 2014 10:27 am
|
|
my friend, Puloku Hayes, took me to Bill's studio last November. He is a great guy, and a master craftsman. I played several of his steels (he's most famous for the electric Weisenborn's he makes for Ben Harper). It is going to be a beautiful instrument. Alan (my friend and kumu mele) went there with Puloko, and the rest is history. I don't know if I can pop for the $3800, but I want one!
_________________
Jack Aldrich
Carter & ShoBud D10's
D8 & T8 Stringmaster
Rickenbacher B6
3 Resonator guitars
Asher Alan Akaka Special SN 6
Canopus D8 |
|
|
|
Ron Whitfield
From:
Kaaawa, Hawaii, USA
|
Posted 27 Feb 2014 11:43 am
|
|
| John Aldrich wrote: |
| I don't know if I can pop for the $3800! |
OOPS! Guess I'll be watching for the Chinese knockoff and pop in one of my lonely Ric shoes. |
|
|
|
Steve Branscom
From:
Pacific NW
|
Posted 27 Feb 2014 11:44 am
|
|
I see the top's already on. Is it chambered like the BH and Electro Hawaiian models?
_________________
Steve |
|
|
|
Liz Williams
From:
California, USA
|
Posted 27 Feb 2014 12:04 pm
|
|
Given how thick it is, it's either chambered, or it comes with a dedicated roadie. Perhaps these will be custom options 
Beautiful-looking. I can't wait to hear it. |
|
|
|
Andy Volk
From:
Boston, MA
|
|
|
|
Bill Asher
From:
Los Angeles, California, USA
|
Posted 27 Feb 2014 7:39 pm
|
|
| The neck and body thickness will be the same as my other lap steels at 1 3/4". It will have my cylindrical tone chambers, and a carbon fiber rod inlaid through the neck. These should have a finished weight of 7lbs, so no need for a weight-lifting roadie |
|
|
|
Bill Asher
From:
Los Angeles, California, USA
|
Posted 27 Feb 2014 7:52 pm Pricing
|
|
| Ron Whitfield wrote: |
| John Aldrich wrote: |
| I don't know if I can pop for the $3800! |
OOPS! Guess I'll be watching for the Chinese knockoff and pop in one of my lonely Ric shoes. |
We realized the 50 limited edition Master Built models with all the fine details and inlay would be at a price not everyone could afford.
So Alan does want to have his signature 8-String available in a student model as well. I will be trying to make these in my US shop at the right price before we go overseas. News on this by fall 2014.
Thanks for every ones interest and feedback. The first 12 of 50 are already sold! |
|
|
|
Liz Williams
From:
California, USA
|
Posted 27 Feb 2014 10:35 pm
|
|
Curses! There goes my chance to acquire a roadie. 
Congratulations on the early sales, Bill. I'm sure I won't be the only one waiting eagerly for the student model. |
|
|
|
Bill Asher
From:
Los Angeles, California, USA
|
Posted 28 Feb 2014 9:17 am
|
|
| Quote: |
John Aldrich wrote:
I don't know if I can pop for the $3800! |
John, the list price is $3180, not $3800. And pre-orders get 10% off, which brings the price to $2862.
We divide that into 3 payments over the build time, so it really can be manageable! |
|
|
|
Ron Whitfield
From:
Kaaawa, Hawaii, USA
|
Posted 28 Feb 2014 12:03 pm Re: Pricing
|
|
| Bill Asher wrote: |
Alan does want to have his signature 8-String available in a student model as well. I will be trying to make these in my US shop at the right price before we go overseas. News on this by fall 2014.
The first 12 of 50 are already sold! |
Thanx for being available for comment, Bill, this is sounding better, any chance yet of hearing what the differences beyond cosmetics will be?
Wow, 12 out already, nice to finally see a recovering National economy in some households! |
|
|
|
Bill Asher
From:
Los Angeles, California, USA
|
Posted 17 Mar 2014 6:15 pm more prototype build pics
|
|
Here is the new slotted headstock design.
 |
|
|
|
Mike Neer
From:
NJ
|
Posted 17 Mar 2014 6:22 pm
|
|
When you look at all the workmanship, care, quality and time that goes into these instruments and you see that it is made by a builder in his own shop, it makes it worth every penny of the money spent.
_________________
Links to streaming music, websites, YouTube: Links |
|
|
|
HowardR
From:
N.Y.C.-Fire Island-Asheville
|
Posted 17 Mar 2014 7:13 pm
|
|
| agreed....... |
|
|
|
