Hilton volume pedal question

Lefty · From: Grayson, Ga.

I bought one of these that has a cord hardwired to the pedal and a 3 prong female plug on the opposite end. It is missing the power supply. Could someone tell me what power supply (series)that I would need?
I know this sounds like a stupid question, but I have not seen this harness in the images that I can find online. It appears to be factory installed though.
Thanks ahead of time,
Lefty

Keith Hilton · From: 248 Laurel Road Ozark, Missouri 65721

Not factory installed. Pedals with the attached power supply were produced from 2000 to 2007. Back then some people-on their own-- rigged up computer power cords so the power supply could be unplugged. Why the 3 prongs? Because the pedal operates from plus 12 volts, minus 12 volts, with ground. Hope this information helps.

Lefty · From: Grayson, Ga.

Keith,
Thank you for the information. It looks like I will need to convert a power supply to have the mating three prong connector. Or I could add the new style jack at the pedal.
regards,
Richard Born

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: