| Author |
Topic: C pedal messing up A pedal |
Ken Campbell
From:
Ferndale, Montana
|
Posted 4 Feb 2014 10:05 pm |
|
Hey mechanical geniuses. My c pedal "b" string raise screws up the a pedal "b" string raise. By that I mean if I mash b and c , which are all in tune, it will,sharp my b raise when I move to ab pedal combos. It will come back in tune after a couple of applications of the ab pedals. Sho-Bud pro iii. Thoughts?
Thanks in advanc
Kc |
|
|
 |
Bob Cox
From:
Buckeye State
|
Posted 5 Feb 2014 4:58 am
|
|
| Chances are you need more slack in the B string rod on your c pedal pull. It may be releasing back sharp preventing the B pull on pedal a from sharing B note. So when you let off c pedal check and see if the rod has a little slack ,if not give it a little more travel by adjusting stop at a more delayed time .You could also have a simpler problem of stickey roller not rolling back. Lift string off ,Oil it and give it a little spin and set string on it retune . |
|
|
|
Ken Campbell
From:
Ferndale, Montana
|
Posted 5 Feb 2014 5:45 am
|
|
Thanks! I'll do just that right after work.
Best regards
Kc |
|
|
|
Ken Campbell
From:
Ferndale, Montana
|
Posted 5 Feb 2014 6:54 pm
|
|
Bob,
Thanks for that. Worked like a charm. I love this place.
Best regards,
Kc |
|
|
|
