Bill Duncan
From:
Lenoir, North Carolina, USA
|
Posted 21 Jan 2014 2:56 pm |
|
Billy,
I just went through this with a 112/50 ValveKing and I was surprised at what I found. I did convert mine to a 212, with a new enclosed cabinet.
The ValveKing , or at least mine, needs a speaker(s) with a tight cone. I tried JBLs, a pair of D120 and D123, and neither sounds as good as the speaker that came in it.
I wound up with two EV12 speakers. The best speakers next to the EV12 was two old 12" Fender speakers from a Twin Reverb. All of the speakers I tried were 8 ohm wired in series to give 16 ohms.
Hope this helps. Bill
_________________
You can observe a lot just by looking |
|
