| Author |
Topic: Stage One Mod |
Jason Putnam
From:
Tennessee, USA
|
Posted 21 Jan 2014 11:57 am |
|
I am still on this idea of having a half stop on RKR on my stage one. There is not a nine lower on the changer but i think i can use that finger as a stop if i had an extra bell crank on that shaft in the 9th position. Since the finger is back against the endplate it cant go anywhere. Ive tried to illustrate my principal with a terrible drawing on the computer. If you think it will work, let me know. I may try to get Doug to make me a shaft for RKR with the extra bellcrank to see if i can make it work. Thanks
_________________
1967 Emmons Bolt On, 1995 Mullen PRP 3x5,Nashville 112, JOYO Digital Delay, Goodrich Volume Pedal, Livesteel Strings |
|
|
 |
richard burton
From:
Britain
|
Posted 21 Jan 2014 12:21 pm
|
|
I've amended your drawing slightly to show how I would do it.
The bell crank slides freely on the rod until it engages the adjustable collar (which is set to engage when the 2nd string has dropped a half tone).
 |
|
|
|
Jason Putnam
From:
Tennessee, USA
|
Posted 21 Jan 2014 1:01 pm
|
|
Thats a great idea! But I will have to find a way to do it since the rods go through the holes like in this picture.Maybe I can come up with some kind of eyelet that will bolt onto the bellcrank and then the rod can go through the hole.
_________________
1967 Emmons Bolt On, 1995 Mullen PRP 3x5,Nashville 112, JOYO Digital Delay, Goodrich Volume Pedal, Livesteel Strings |
|
|
|
