| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic ''9-TH string lower''
Reply to topic
Author Topic:  ''9-TH string lower''
Gary Preston


From:
Columbus, Ohio, USA
Post  Posted 7 Aug 2003 12:14 pm    
Reply with quote

Lets try this one . does onyone have any real good licks by lowering the 9-TH string a half step with a combination of other strings ?? thanks .. G.P.
View user's profile Send private message Send e-mail
C Dixon

 

From:
Duluth, GA USA
Post  Posted 7 Aug 2003 4:05 pm    
Reply with quote

The following is a few:

1. Pick strings 6, 8 and 9. While they sustain, engage the A and B pedal AND lower the 9th string together. Takes you from a V7 to I chord.

2. Engage just the B pedal and lower the 9th string (assumes you are lowering the 2nd string to C# with it). Now start with the ninth string and pick each string letting them sustain all the way to string 1. This is a great ending chord, because it blends a 6th with a suspended in an unusual spelling. NICE

3. Just lower the 9th string and pick strings 5, 6 and 9. Gives you a western swing chord. In essence it is simply a common 6th as used on A6th and other tunings. But due to the timbre of our E9th tuning, it sounds more than just a 6th.

Adding these at given times, will embellish your playing.

Try it

carl
View user's profile Send private message Send e-mail Visit poster's website
Ken Williams


From:
Arkansas
Post  Posted 7 Aug 2003 9:51 pm    
Reply with quote

Gary, if you're in the key of C and want a nice "ending" chord for certain types of songs, go the 3rd fret and play strings 9,8,6,5 with the lever pressed and no pedals. There's no C note in there. But if the bass player is playing the C note it gives you a C Maj9. I may be wrong about the name of the chord, but it sounds good.

Ken
http//home.ipa.net/~kenwill

[This message was edited by Ken Williams on 07 August 2003 at 10:53 PM.]

[This message was edited by Ken Williams on 07 August 2003 at 10:53 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Bill Hankey


From:
Pittsfield, MA, USA
Post  Posted 8 Aug 2003 1:40 am    
Reply with quote


Dang it all!! I had written about the "Tommy" pedal which (lowers the 9th string 1/2 tone), and is pedal 4, which is placed beside the "A" pedal, which is pedal 3 of the Jimmy Day setup. After a ham and egg breakfast, try this move - move up one fret from any position, lower the 9th, press the "A" pedal, raise the E-F of 4 and 8 strings, all done simultaneously, pick strings 4,6,8,9,and 10 simultaneously, then let all go, as you slide back one fret, to the original position. The move will provide an emphatic major to 7th chord. What? The famed instructor skipped over that move? Sorry, it works for me, and I love its sound.

Bill H.
View user's profile Send private message Send e-mail
Gary Preston


From:
Columbus, Ohio, USA
Post  Posted 10 Aug 2003 4:38 pm    
Reply with quote

Thanks guys . anyone else with any tips ??
regards G.P.
View user's profile Send private message Send e-mail
Drew Howard


From:
48854
Post  Posted 11 Aug 2003 6:28 am    
Reply with quote

Gary,

What Carl said. I'll add that one use I've found is getting maj7add9 chords like C6 p7.

E6 to Emaj7add9 and back

5--5---7---5--|
6--5---7---5--|
7--5---7---5--|
8--5L--7---5L-|
9------7L-----|


cheers,
Drew

------------------
www.newslinkassociates.com
www.drewhoward.com

View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron