| Author |
Topic: Peavey PX 300 |
Alex Cattaneo
From:
Quebec, Canada
|
Posted 5 Nov 2013 7:11 pm |
|
I didn't know about these until I saw one for sale on the Forum. If anyone has experience with it or an educated opinion about them, I would love to hear about it. Or any other comparable powered speaker. The PX 300 has a 9-band EQ, that seems like a plus...
[/code] |
|
|
 |
Mike Wheeler
From:
Delaware, Ohio, USA
|
Posted 5 Nov 2013 7:48 pm
|
|
Alex, the PX-300 is simply a powered speaker cab. That's it. No Eq at all.
BUT, it's a killer cab. It was made as an extension cab for a Session 2000 amp (both have 300 watts), or you could use the PX with a rack system, or combo amp, with a preamp output.
I have the 2000 and the PX and I could use them to do demolition work. It could peel paint, or blow down brick walls.
seriously though, I think that combination sounds terrific even at low bedroom levels. I love 'em.
Hope this helped.
_________________
Best regards,
Mike |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 5 Nov 2013 8:40 pm
|
|
I used to have one and used it with my Nashville 400. Mostly placed it on the other side of the stage for the players on that side to hear me better and to give better coverage in the audience. The volume control on it was real handy for the other players to control the volume on their side of the stage. I have also used it stacked under my 400. Nice sound with the 2 15" speakers and lower amp volumes.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting. |
|
|
|
Alex Cattaneo
From:
Quebec, Canada
|
Posted 5 Nov 2013 9:23 pm
|
|
| Thanks guys, very helpful! |
|
|
|
CrowBear Schmitt
From:
Ariege, - PairO'knees, - France
|
|
|
|
Alex Cattaneo
From:
Quebec, Canada
|
Posted 6 Nov 2013 7:19 am
|
|
| I bet it's heavy though... Maybe if I put my Eminence EPS-15 in there... |
|
|
|
Bob Knight
From:
Bowling Green KY
|
Posted 6 Nov 2013 8:00 am
|
|
I have a nice PX 300 available, I will sell it with or without the speaker.
Bob 
270-792-3099 |
|
|
|
Mike Wheeler
From:
Delaware, Ohio, USA
|
Posted 6 Nov 2013 9:47 am
|
|
My scale say it weighs 64 pounds.
_________________
Best regards,
Mike |
|
|
|
Paddy Long
From:
Christchurch, New Zealand
|
Posted 6 Nov 2013 2:21 pm
|
|
Alex if you put a PV Neo magnet on the speaker it lightens the load considerably ... I did this with my NV1000 and it is much more manageable - not that the original was that heavy.
_________________
14'Zumsteel Hybrid D10 9+9
08'Zumsteel Hybrid D10 9+9
94' Franklin Stereo D10 9+8
Telonics, Peterson, Steelers Choice, Benado, Lexicon, Red Dirt Cases. |
|
|
|
Alex Cattaneo
From:
Quebec, Canada
|
Posted 7 Nov 2013 6:59 am
|
|
| Mike, thanks for going to the trouble of actually weighing it. Very helpful! And Bob, thank you for the offer. Just seems too heavy for me right now, especially knowing I can get a stereo rackmount Carvin amp that weighs in at 4 pounds and has all the power I'll ever need... |
|
|
|
