| Author |
Topic: WTB- Nashville 112 Knob Guard |
Scott Burchill
From:
Pennsylvania, USA
|
Posted 28 Oct 2013 9:48 am |
|
| Looking for a Jim Eaton Knob Guard for a Peavey Nashville 112. Used is ok if in good shape. |
|
|
 |
Sam White R.I.P.
From:
Coventry, RI 02816
|
Posted 31 Oct 2013 4:08 pm
|
|
Scott go to Home Depot and by a piece of 1/2 inch Aluminum L shape bar and where the Amp goes in cut it on a angle and then do the other end to fit in even with the outer edge of the Amp and it woks fine. That is what I did to mine and never had a problem.
Sam White
_________________
Dynalap lap 8 String Lap Steel Fender frontman 25B speaker changed Boss TU-12H Tuner.Founder and supporter of the Rhode Island Steel Guitar Association Founder of the New England Steel Guitar Association and the Greeneville TN Steel Jams and now founder of the North Carolina Steel Guitar Jams. Honorary member of the Rhode Island Steel Guitar Association,Member of The New England Steel Guitar Association.
Member of the Florida Steel Guitar Club,and member of Mid Atlantic Steel Guitar Association |
|
|
|
Joe Rouse
From:
San Antonio, Texas
|
Posted 1 Nov 2013 3:44 am 112 Knob Guard
|
|
| Check with George Kimery in Limestone Tenn. I bought 2 knob guards from him and the price for the 2 was less than 25.00. Excellent product and a good guy to deal with....jr |
|
|
|
Scott Duckworth
From:
Etowah, TN Western Foothills of the Smokies
|
Posted 1 Nov 2013 9:18 am
|
|
Ditto on George Kimery!
_________________
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus! |
|
|
|
Scott Burchill
From:
Pennsylvania, USA
|
Posted 2 Nov 2013 2:31 pm Thanks
|
|
| Thanks for the help and idea's. |
|
|
|
