| Author |
Topic: Dunlop Volume Pedal |
Roger Shackelton
From:
MINNESOTA (deceased)
|
Posted 11 Oct 2013 9:01 pm |
|
How many steel players are using the DUNLOP Volume pedal?
Roger |
|
|
 |
Robert Morgan
From:
Texas, USA
|
Posted 30 Oct 2013 5:58 pm Dunlop
|
|
| I bought a new Dunlop pedal 7 or 8 months ago and I do not like it at all. It is not even comparable with my Goodrich 120. |
|
|
|
Mike Perlowin
From:
Los Angeles CA
|
Posted 30 Oct 2013 7:37 pm
|
|
Dunlop makes good stuff in general and in all probability this is an excellent tool for guitarists or keyboard players.
But we have special needs. We need volume pedals designed to be used with a steel.
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin |
|
|
|
Brett Day
From:
Pickens, SC
|
Posted 30 Oct 2013 8:56 pm
|
|
| Junior Brown uses a Dunlop volume pedal with the guitsteel. I use Dunlop picks now and when I started playing steel, I used a Dunlop bar. I'm using a different bar now, though |
|
|
|
Tommy Auldridge
From:
Maryland, USA
|
Posted 31 Oct 2013 11:05 am Converted Dunlop Volume Pedal
|
|
| I always use a Dunlop pedal, but mine was re-worked to accept a 500K ohm pot. Also, had the in & out jacks moved to the side of the pedal instead of on the front. A local repair guy (Tommy Lepson)did an exelent job on this for me. I'll probably never use anything else. Tommy....... |
|
|
|
Michael Maddex
From:
Northern New Mexico, USA
|
Posted 31 Oct 2013 2:41 pm
|
|
I have a Dunlop GCB-80. The jacks are on the sides. It's built like a tank. I haven't tried too many other pedals, but so far I haven't seen anything that comes remotely close to this one. YMMV.
OT: I use Dunlop thumb-picks (plastic & metal), but I won't go near their finger-picks. Once again, YMMV.
_________________
"For every expert, there is an equal and opposite expert." -- Arthur C. Clarke |
|
|
|
Luke Juda
From:
Texas, USA
|
Posted 31 Oct 2013 2:47 pm Dunlop Volun Pedal
|
|
| I also use a Dunlop GCB-80 and like it alot, however I have not used another brand to compare. |
|
|
|
Bob Russell
From:
Virginia, USA
|
Posted 1 Nov 2013 5:00 am
|
|
I use one of these, which seems bullet-proof and has so far been reliable. But I'm not crazy about the taper. Too fast at the low end for me.
 [/img]
_________________
Lots of stringy things, many of them slidey. |
|
|
|
