| Author |
Topic: Buzz in Studio Monitor |
Niels Andrews
From:
Salinas, California, USA
|
Posted 13 Oct 2013 1:58 pm |
|
I have a pair of 8 inch Mackie powered speaker and one has developed a buzz. Nothing seems to eliminate including ground lift. Power supply maybe?
_________________
Die with Memories. Not Dreams.
Good Stuff like Zum S-12, Wolfe Resoport
MSA SS-12, Telonics Combo. |
|
|
 |
Jay Fagerlie
From:
Lotus, California, USA
|
Posted 14 Oct 2013 4:08 am
|
|
Swap the cables from the source. Does the buzz change to the other speaker?
Does it buzz when nothing is plugged into it?
Jay |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 14 Oct 2013 4:18 am
|
|
| I had a problem with my Samson (Resolv 6.5a) studio monitors. It turned out I was using a headphone out on my Roland Octa-Capture to drive the monitors. I switched to the correct "line out" and the buzz went away. |
|
|
|
Niels Andrews
From:
Salinas, California, USA
|
Posted 14 Oct 2013 6:38 am
|
|
The buzz is there even if I disconnect the input and swap power cords.
_________________
Die with Memories. Not Dreams.
Good Stuff like Zum S-12, Wolfe Resoport
MSA SS-12, Telonics Combo. |
|
|
|
Michael Hummel
From:
Ottawa, Ontario, Canada
|
Posted 14 Oct 2013 8:37 am
|
|
I have a pair of Mackie 824s too. Even though they are "magnetically shielded", have you moved anything around in your studio recently? Like put a computer monitor right next to the speaker that is buzzing?
Just fishing...otherwise I guess you have a power supply gone bad in the speaker.
Mike
_________________
MSA Classic 5+4
Too many 6-strings and amps to list |
|
|
|
