| Author |
Topic: Tuner leg clip |
Jason Bergeron
From:
Lake Charles, LA, USA
|
Posted 1 Oct 2013 6:16 pm |
|
I have a Korg Model WT-10A as well as a Model CA-1 tuner. Is there some type of device available to attach either one of my tuners to a leg on my PSG? I really like my Korg tuners and would rather not have to buy another one just to have it conveniently clip on a leg.
_________________
Sho~Bud Super Pro, Peavey Nashville 400
©Jason Bergeron |
|
|
 |
Willie Sims
From:
PADUCAH, KY, USA
|
Posted 2 Oct 2013 7:43 am Turner leg clip
|
|
| Jason, I don't know how large your tuners are, I made a holder for a boss rv3 by using three-quarter inch aluminum angle iron. You just cut them to the link you need to fit the bottom of your tuner, then cut a piece of three-quarter inch vinyl plastic pipe, cut a notch in the side of the plastic tubing just big enough that you can snap it on the leg of your guitar. Fasten the angle iron together to fit the bottom of your tuner, fasten the plastic tubing to the aluminum angle iron with small bolts or screws and you can snap it on the leg of your guitar providing your tuner isn't too heavy hope you can get some use out of this . Willie Sims, |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 2 Oct 2013 8:59 am
|
|
A while back there was a party on the forum making little shelves that fastened to the leg of a guitar. I bought one of those and velcroed my tuner to it.
Works out great.
I don't know if it was Bessdang Gizmos or not. |
|
|
|
