| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic need emmons help!
Goto page 1, 2  Next
Reply to topic
Author Topic:  need emmons help!
Shawn Sprouse

 

From:
LaVergne,Tennessee, USA
Post  Posted 9 Sep 2013 10:42 am    
Reply with quote

Anyone have a way to get through to Emmons?I called Emmons today and got another surprise! A recording that said "due to subscribers request, this phone will not accept incoming calls." I had a friend call and he got the same message. After a year and a half of so-called working on my guitar, all I want is honesty, my guitar or my money back! This has been a nightmare! My respect for Emmons is gone and once this is cleared up I will never do business with them again![/b]
View user's profile Send private message Send e-mail Visit poster's website
Cal Sharp


From:
the farm in Kornfield Kounty, TN
Post  Posted 9 Sep 2013 11:03 am    
Reply with quote

You might try getting hold of Mike Cass if you haven't already.

You might try getting hold of Mike Cass if you haven't already.

You might try getting hold of Mike Cass if you haven't already.
_________________
C#
Me: Steel Guitar Madness
Latest ebook: Steel Guitar Insanity
Custom Made Covers for Steel Guitars & Amps at Sharp Covers Nashville
View user's profile Send private message Send e-mail Visit poster's website
David Collins


From:
Madison, North Carolina, USA
Post  Posted 9 Sep 2013 5:04 pm    
Reply with quote

And awaaaaayyyyyyyyyyy we go!!!!
_________________
David Collins
www.chjoyce.com
View user's profile Send private message Visit poster's website
Cal Sharp


From:
the farm in Kornfield Kounty, TN
Post  Posted 9 Sep 2013 5:37 pm    
Reply with quote

David, you're not that far away. Why don't you drive over there and see what's going on and report back? Winking
_________________
C#
Me: Steel Guitar Madness
Latest ebook: Steel Guitar Insanity
Custom Made Covers for Steel Guitars & Amps at Sharp Covers Nashville
View user's profile Send private message Send e-mail Visit poster's website
Shawn Sprouse

 

From:
LaVergne,Tennessee, USA
Post  Posted 10 Sep 2013 5:45 am    
Reply with quote

Thanks Cal! I sent Mike a message. Hopefully he can and will help. My next stop is the courthouse! This is uncalled for, to go this long and jerk folks around. How is your amp doing? I may get with you and see who fixed yours. Maybe they can get the bugs out of mine.
View user's profile Send private message Send e-mail Visit poster's website
chris ivey


From:
california (deceased)
Post  Posted 10 Sep 2013 9:07 am    
Reply with quote

Exclamation
View user's profile Send private message
Cal Sharp


From:
the farm in Kornfield Kounty, TN
Post  Posted 10 Sep 2013 12:04 pm    
Reply with quote

Shawn, John at Sound Stage in Dickson fixed my amp. It had a bunch of loose solder connections and some other issues. I realize now that its quality had been slowly diminishing for a long time. Sounds good now.
_________________
C#
Me: Steel Guitar Madness
Latest ebook: Steel Guitar Insanity
Custom Made Covers for Steel Guitars & Amps at Sharp Covers Nashville
View user's profile Send private message Send e-mail Visit poster's website
David Collins


From:
Madison, North Carolina, USA
Post  Posted 10 Sep 2013 4:54 pm    
Reply with quote

Last I heard, the Emmons "Factory" building was for sale, and that Ron Jr. was working from home. I have not confirmed this, but if time allows, I'll ride by and take a look see.

I have been there some years back, but the economy here has been hard hit, like many other places. A lot can change in a couple years.

I'm not trying to start rumors, rather would like to confirm facts if possible. From what I've heard, a 1 1/2 to 2 year wait on a new Emmons is not at all unusual.
_________________
David Collins
www.chjoyce.com
View user's profile Send private message Visit poster's website
Stephen Gambrell

 

From:
Over there
Post  Posted 10 Sep 2013 6:34 pm    
Reply with quote

Aren't there several Emmons dealers on the Forum?
View user's profile Send private message Send e-mail
Mike Cass

 

Post  Posted 11 Sep 2013 1:46 am    
Reply with quote

Shawn,

I sent you a PM. I plan to go to the factory sometime this month to build. If that does indeed go down I'll report back on here.
sincerely,

MC
an Emmons dealer.
Shawn Sprouse

 

From:
LaVergne,Tennessee, USA
Post  Posted 11 Sep 2013 6:01 am    
Reply with quote

Thanks Cal! I will give John a call.

David and Mike, thanks for considering to check up on Emmons.

As I have said before, I have a bill of sale with a promised time of End of August - first of September of last year. If they would have told me back then that there is a 2 year wait, that would have been fine. Instead they chose tojerk me around by telling me it will be another 2 weeks, every time I called to check on it. I have been hearing 2 more weeks since August a year ago. My patience has finally run out. I can handle the truth, but I can't stand being lied to.
View user's profile Send private message Send e-mail Visit poster's website
chris ivey


From:
california (deceased)
Post  Posted 11 Sep 2013 8:08 am    
Reply with quote

amen!
View user's profile Send private message
Nick Reed


From:
Russellville, KY USA
Post  Posted 12 Sep 2013 7:10 am    
Reply with quote

Seems like you never heard about these kind of problems back when Jack Strayhorn was running the company.

View user's profile Send private message Send e-mail
Henry Matthews


From:
Texarkana, Ark USA
Post  Posted 12 Sep 2013 11:44 am    
Reply with quote

Just me but I think anything over a six week wait for any guitar is rediculous, JMHO. That is if they are still in full swing business. If not then I can understand the wait a little longer, but a year is too much.
_________________
Henry Matthews

D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes.
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 12 Sep 2013 12:23 pm    
Reply with quote

ISTR that the Lashleys have some family medical problems, severe enough that I wouldn't blame them for not building guitars.
But the lack of communication is troubling.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 12 Sep 2013 1:30 pm    
Reply with quote

Henry Matthews wrote:
Just me but I think anything over a six week wait for any guitar is rediculous, JMHO. That is if they are still in full swing business. If not then I can understand the wait a little longer, but a year is too much.



_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Joseph Barcus

 

From:
Volga West Virginia
Post  Posted 12 Sep 2013 2:18 pm    
Reply with quote

I was going to get a new one some time back from a different builder, not emmons. but when I was told money up front and wait a year I said no way I would do that if they cant keep up with the demand they need to do one of two things, get more help or stop all together
_________________
https://www.youtube.com/channel/UCvuH7H8BajODaL_wy3_HSJQ
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 12 Sep 2013 2:38 pm    
Reply with quote

Joseph, I think the world would rather have 1 Zum every two weeks than no more at all.
Not saying that you meant Zum (or Franklin, or any other 1 person shops) in particular.
Pretty sure you didn't mean Bruce: he required a smaller deposit, and would often close his waitlist if it exceeded a year.
But many of the 1 person shops have one year waiting lists.
But they'll usually have good communications.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Cartwright Thompson


Post  Posted 12 Sep 2013 2:47 pm    
Reply with quote

How many times have we seen stories like this in the past few years? With all the great used Emmons guitars for sale, I can't imagine buying any new guitar, much less an Emmons. It's amazing what those guys get away with and still manage to sell guitars.
View user's profile Send private message
David Collins


From:
Madison, North Carolina, USA
Post  Posted 17 Sep 2013 1:37 pm    
Reply with quote

I did have the opportunity to stop in Burlington today and visit the Emmons factory. I found Ron Jr. there and working on guitars. He welcomed me in and we talked for a half hour or so, while I placed my order for a neck selector switch.

He quickly volunteered the new phone number: 336-437-2785

I saw 2 guitars in various stages of completion, both absolutely beautiful. I have no idea where they are destined to go, didn't ask, didn't think it my business.

We did discuss the difficulty in obtaining materials from suppliers. The economy in NC has been very hard hit, and supply chains are the weakest that I can ever remember them. There seem to be many similarities in the Emmons business and my own contracting business when it comes to dealing with suppliers.

We did not discuss communications issues, and I make no offering there.

I do believe that they have every intent of filling every order, albeit slowly, due mainly to supply issues. Ron did tell me that he is able, at present, to complete about 2 guitars per month, and that he'd really like to improve on that. He indicated that the capacity to build exceeded the supply chain.
_________________
David Collins
www.chjoyce.com
View user's profile Send private message Visit poster's website
Cal Sharp


From:
the farm in Kornfield Kounty, TN
Post  Posted 17 Sep 2013 1:45 pm    
Reply with quote

So we have an eye witness - Emmons is still an entity. Good work, David.
_________________
C#
Me: Steel Guitar Madness
Latest ebook: Steel Guitar Insanity
Custom Made Covers for Steel Guitars & Amps at Sharp Covers Nashville
View user's profile Send private message Send e-mail Visit poster's website
David Collins


From:
Madison, North Carolina, USA
Post  Posted 17 Sep 2013 3:01 pm    
Reply with quote

Very Happy
_________________
David Collins
www.chjoyce.com
View user's profile Send private message Visit poster's website
Hook Moore


From:
South Charleston,West Virginia
Post  Posted 17 Sep 2013 3:25 pm    
Reply with quote

Thank you David..
_________________
http://twitter.com/hook_moore
www.facebook.com/hook.moore
Blaine Moore
View user's profile Send private message Send e-mail
Jack Stoner


From:
Kansas City, MO
Post  Posted 18 Sep 2013 2:12 am    
Reply with quote

The info on the visit is good, but it still does not address the original poster's issue. And, the original posters problems are not the first time this has happened from previous posts on this forum.
View user's profile Send private message Send e-mail
David Collins


From:
Madison, North Carolina, USA
Post  Posted 18 Sep 2013 2:36 am    
Reply with quote

With all due respect Jack, I'm not about to stick my nose that deep into some one else's business.
_________________
David Collins
www.chjoyce.com
View user's profile Send private message Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron