| Author |
Topic: Nashville 112 hum |
Nigel Mullen
From:
Cassilis, New Brunswick, Canada
|
Posted 13 Sep 2013 12:54 pm |
|
| My Nashville 112 is a great amp and is the best sounding amp I've ever owned, however, when I'm recording there is a hum from the amp that's annoying. I have unplugged everything and the hum is still there. On live gigs it performs flawlessly and I don't notice the hum. I only notice it in the studio and wonder if anyone else has the same problem. Other than that, the amp is excellent. I'm wondering if all the 112's have this problem or is mine the only one. Any suggestions you have are welcome. Thanks NM |
|
|
 |
Lane Gray
From:
Topeka, KS
|
Posted 13 Sep 2013 2:23 pm
|
|
Are you using a mic, or going direct?
If direct, I'd suspect ground loop, try a HumX.
If you mic, I got nothin'.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 13 Sep 2013 2:29 pm
|
|
If you are using an XLR cable to connect the amp to the recording board, it sounds like the XLR cable ground is connected to the 3rd wire ground. The XLR cable ground must not be connected to the third wire in an XLR cable (at least on one end) or ground loops can occur.
I got his from a friend who is a retired TV broadcast engineer and has worked with many XLR cables in TV studios. |
|
|
|
Dave Simonis
From:
Stevens Point, WI USA
|
Posted 13 Sep 2013 4:36 pm
|
|
Mine only hums with the amp reverb...the more the verb is up, the louder the hum - I went to a Boss RV pedal and keep the verb on "0".
_________________
Dave Simonis
Fiddle: Zeta, Arthur Conner, many others.../Steel: GFI SD-10 Ultra.../Mandolin: Breedlove.../Guitar: Gibson, Fender, Taylor.../Amps: Peavey NV112, Evans FET 500.../Others: Hilton, Goodrich, Stereo Steel, Pendulum Pre-amp... |
|
|
|
Nigel Mullen
From:
Cassilis, New Brunswick, Canada
|
Posted 15 Sep 2013 1:59 pm
|
|
| Thanks guys. I think I need a new cable. NM |
|
|
|
