| Author |
Topic: MCI Pedals (Need Two, Please) |
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 5 Sep 2013 2:11 pm |
|
I'm in the process of restoring a D-10 MCI for a customer, with S/N A 3119. It has two pedals that obviously have been moved from the A and B position because of the wear on them. I'd sure like to find a couple of replacements for these two. Can anyone provide a pair I can buy, or point me in the right direction? I've already contacted my friend, Jim Flynn who has none, unfortunately.
Here are a few photos to help ID the proper ones I need.
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
 |
Chris Lucker
From:
Los Angeles, California USA
|
Posted 5 Sep 2013 8:45 pm
|
|
The pedals I mentioned are now gone. I never heard from you.
Chris
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars.
Last edited by Chris Lucker on 6 Sep 2013 8:56 am; edited 1 time in total |
|
|
|
Charlie Moore
From:
Deville, Louisiana, USA
|
Posted 6 Sep 2013 2:02 am Pedal
|
|
Lynn,I am restoring MCI ser# 6004 and the pedals are not like yours,whats up with that...thx...CM
_________________
Use it up,wear it out,make it do,or do without..... |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 6 Sep 2013 6:01 am
|
|
| There were 2 different styles- one w treads and the other w/o. |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 6 Sep 2013 10:24 am Pedals
|
|
| Chris Lucker wrote: |
The pedals I mentioned are now gone. I never heard from you.
Chris |
Chris,
You must be referring to a conversation we had a couple of years ago, when I was looking for some very early Emmons pedals, for a project I had acquired. I'm sorry but I don't recall you actually offering any pedals for me to buy. Apparently we had a miscommunication, for which I sincerely apologize. I no longer own that guitar, as I just recently traded it for another one here in Portland.
Regards,
Lynn |
|
|
|
Chris Lucker
From:
Los Angeles, California USA
|
Posted 6 Sep 2013 10:29 am
|
|
Lynn
I had a post above that asked you to make an offer for ten pedals of the twenty plus MCI pedals that I had. It was not worthwhile going to the warehouse for two pedals. I had not heard from you, so I sold the twenty seven pedals I did have.
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars. |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 13 Sep 2013 7:35 am Bump
|
|
| Chris Lucker wrote: |
Lynn
I had a post above that asked you to make an offer for ten pedals of the twenty plus MCI pedals that I had. It was not worthwhile going to the warehouse for two pedals. I had not heard from you, so I sold the twenty seven pedals I did have. |
Chris sold all these pedals before I even knew they were even available. Apparently, I missed his window of opportunity, so I'm still in need of 2 pedals. If the person that purchased the above mentioned 27 pedals can spare a couple, I'd be very appreciative. I'm hoping that person will see this and email me with a price for them. Fingers crossed 
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Charlie Moore
From:
Deville, Louisiana, USA
|
Posted 13 Sep 2013 8:21 am MCI pedals
|
|
try Mr.Peter Freiberger ( a forum member),I got some parts i was looking for from him, I need a cross shaft if you got one...CM
_________________
Use it up,wear it out,make it do,or do without..... |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 17 Sep 2013 12:30 pm MCI Pedals
|
|
Thanks, Charlie but Peter does not have the style of pedals I'm looking for. Sorry, but I don't have any cross shafts.
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 24 Oct 2013 11:03 am Bump
|
|
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
