| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Issues with Hilton Volume Pedal
Reply to topic
Author Topic:  Issues with Hilton Volume Pedal
Ian S. Cameron


From:
Saskatchewan, Canada
Post  Posted 12 Sep 2013 2:09 pm    
Reply with quote

I'm running my Hilton ME262-B through my fender twin into my MSA with a George L pickup. When I use the Hilton, my tone becomes noticeably more gritty, and the high end is difficult to control. I am aware of the tone screw on the pedal, but I can't seem to use that to correct the problem of the grit. Any insight would be helpful!
View user's profile Send private message Send e-mail
Larry Bressington

 

From:
Nebraska
Post  Posted 12 Sep 2013 4:11 pm    
Reply with quote

Whats the chain Pattern? Should be Steel to pedal 'in'...Pedal 'out' to Amp...

Your posts sounds like your using the volume pedal in an effects chain when you say; to your amp and into the MSA
_________________
A.K.A Chappy.
View user's profile Send private message
Ian S. Cameron


From:
Saskatchewan, Canada
Post  Posted 12 Sep 2013 4:22 pm    
Reply with quote

No effects involved, everything is plugged in to the correct outputs/inputs. Just trying to give a full idea of my setup is all.
View user's profile Send private message Send e-mail
Larry Bressington

 

From:
Nebraska
Post  Posted 12 Sep 2013 4:34 pm    
Reply with quote

Have you tried backing the volume down on the pedal,[ the one underneath] i run mine at about 60 per cent because it overdrives my pre-amps...As far as the screechy highs, i'm lost...It sounds like the pre-amp isent happy either in the amp or the pedal?...Just a thought!

When i set mine up, i turn the pedal all the way up with the volume pedal wide open...Then i hit the low strings hard and then back off the adjustable volume pot underneath the pedal, until my pre-amp no longer distorts.

Also when using a Tube amp, those valves don't like too much signal, unlike a solid state where you can hit em hard with a belt of signal to get that thump.
_________________
A.K.A Chappy.
View user's profile Send private message
Eugene Cole


From:
near Washington Grove, MD, USA
Post  Posted 12 Sep 2013 4:49 pm    
Reply with quote

Have you checked the voltage coming from the power supply? If the voltage is not in the recommended range that can wreak havoc on the signal which comes out.

The other thing I am wondering if if you get the same results with all of your amps, or all of the amps which you have a chance to the pedal with if your frinds or bandmates can let you try ine of their amps.

I am not that familiar with Hilton Pedels but I work with audio gear all of the time so I do have experience with chaing down problems.
_________________
Regards
-- Eugene <sup>at</sup> FJ45.com

PixEnBar.com
Cole-Luthierie.com
FJ45.com

Sierra U14 8+5 my copedent, 1972 MSA D10 8+4, and nothing in the Bank. 8^)
View user's profile Send private message Send e-mail Visit poster's website
Storm Rosson

 

From:
Silver City, NM. USA
Post  Posted 12 Sep 2013 5:16 pm    
Reply with quote

Smile Just contact Keith Hilton, he is a forumite and an A number 1 guy. Winking
View user's profile Send private message Send e-mail
Malcolm McMaster


From:
Beith Ayrshire Scotland
Post  Posted 13 Sep 2013 5:54 am    
Reply with quote

What Storm said, always found Keith to be extremely helpful , solved a few things I asked him. Very Happy
_________________
MSA Millenium SD10, GK MB200, Sica 12inch cab, Joyo American Sound Pedal/ Jay Ganz Straight Ahead amp, Telonics 15inch in Peavey cab, Digitech RP150, Peterson tuner.Hilton volume pedal.Scott Dixon seat and guitar flight case.
View user's profile Send private message Send e-mail
Jan Viljoen


From:
Pretoria, South Africa
Post  Posted 14 Sep 2013 8:54 am    
Reply with quote

I had some issues with my used Hilton and eventually found the small volume pot was stripped.
Easily fixed with a locally found pot for about $0,60.

It works well now, but I am thinking of changing the heavy transformer with something lighter.
We use 220 volt in South Africa.
There are only three wires going into the pedal.
Which one is earth?

Any suggestions please.

Idea
_________________
Sierra S10, Stage One, Gibson BR4, Framus, Guya 6&8, Hofner lap, Custom mandolins, Keilwerth sax.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
View user's profile Send private message Send e-mail
Kevin Hatton

 

From:
Buffalo, N.Y.
Post  Posted 15 Sep 2013 8:50 pm    
Reply with quote

You need to call Keith Hilton. He will help you.
View user's profile Send private message Send e-mail Visit poster's website
Jan Viljoen


From:
Pretoria, South Africa
Post  Posted 15 Sep 2013 9:25 pm    
Reply with quote

Thanks Kevin, will do so.
_________________
Sierra S10, Stage One, Gibson BR4, Framus, Guya 6&8, Hofner lap, Custom mandolins, Keilwerth sax.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron