| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic 73 Msa Classic S10 5x4 Setup
Reply to topic
Author Topic:  73 Msa Classic S10 5x4 Setup
Carl McLaughlin


From:
St.Stephen,New Brunswick,Can
Post  Posted 21 May 2013 3:03 am    
Reply with quote

:DLOOKING FOR A MANUAL FOR A MSA S10 CLASSIC 5X4,THAT SHOWS SETUP AND EXPLAINS ALL THE UNDERNEATH WORKINGS AND HOW TO SET THEM UP,CHANGE SETTINGS ETC?????? CARL ,THANKS IN ADVANCE
_________________
I have a Tele plus telecaster, Larrivee acoustic. Also have a Fender resonator guitar with new Quarterman cone and spider, and an Allan tailpiece .Playing through a Fender Super Champ XD, using a little delay on the amp and a Harmonix Holy Grail Echo pedal, set on Hall turned to about 1pm.Just Bought a Yamaha FGX5 Recently and love it. Recently got a Sho-NUFF 6 string pedal steel in open G.Still learning.
View user's profile Send private message Send e-mail
Scott Duckworth


From:
Etowah, TN Western Foothills of the Smokies
Post  Posted 21 May 2013 4:18 am    
Reply with quote

Hey Carl, how 'bout this one...

http://www.steelguitar.com/manuals/MSA_OwnersManual.pdf
_________________
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it

I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
View user's profile Send private message Send e-mail Visit poster's website
Lane Gray


From:
Topeka, KS
Post  Posted 21 May 2013 5:57 am    
Reply with quote

The owner's manual doesn't have a rodding chart.
If the existing pedals and knees are hooked up, make a note of what they do and where they hook, both at changer and at the bellcrank.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Lane Gray


From:
Topeka, KS
Post  Posted 21 May 2013 6:05 am    
Reply with quote

Generic info on rodding
http://steelguitar.com/rodding.html
How it works
http://steelguitar.com/maps/changer.html

Fortunately, your guitar is one of the easiest to tinker with, and fairly amateur-tolerant (I won't say idiot-proof, because I've seen determined idiots)

If you'd say what you're trying to accomplish. this forum has several folks who'll help you.
I'd give specifics, but I've got 100 miles between me and my guitar, and growing.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Carl McLaughlin


From:
St.Stephen,New Brunswick,Can
Post  Posted 21 May 2013 7:22 am     Manual
Reply with quote

Very Happy Thanks to all who sent suggestions for my MSA S10..I printed out what was sent to me..Thanks again guys ,much appreciated..Carl
_________________
I have a Tele plus telecaster, Larrivee acoustic. Also have a Fender resonator guitar with new Quarterman cone and spider, and an Allan tailpiece .Playing through a Fender Super Champ XD, using a little delay on the amp and a Harmonix Holy Grail Echo pedal, set on Hall turned to about 1pm.Just Bought a Yamaha FGX5 Recently and love it. Recently got a Sho-NUFF 6 string pedal steel in open G.Still learning.
View user's profile Send private message Send e-mail
Ian Sutton


From:
San Francisco, CA
Post  Posted 21 May 2013 8:54 am    
Reply with quote

Here is a chart b0b made for his 77 MSA, I used it for my 3 and 5 76 MSA Classic.

http://bb.steelguitarforum.com/viewtopic.php?t=218054&sid=cca8bd46bd2e7ce6c3a3f14398a2c110
_________________
Some gear.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron