MSA Classic D 10 clean up and parts

John H. McGlothlin · From: Raton, New Mexico

I'm planning on taking my MSA Classic apart to clean the changer and I know that some of the parts may need to be replaced like the nylon spacers between the fingers and the pedal return springs one of which I know is broken, my question is , does anyone know where I can find the same size spacers made of aluminum or brass and where I might find the pedal return springs? Thanks for any help.
_________________
Marlen SD 10 3 and 5,Fender 5 String Banjo, Flinthill 5 string banjo,Johnson Resonator Guitar, Ibanez AFS75T Country/Jazz Guitar.

Mike Wheeler · From: Delaware, Ohio, USA

Check out Michael Yahl's offerings (at bottom of page). Lots of great MSA parts.

http://www.psgparts.com/MSA_c10.htm
_________________
Best regards,
Mike

Lane Gray · From: Topeka, KS

I don't recall Michael having the nylon washers.
As for the pedal return springs, I'd skip em unless the weight of a pedal is moving a string.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: