| Author |
Topic: Big Tuning Wrenches - NOW IN STOCK!!! |
Michael Yahl
From:
Troy, Texas!
|
Posted 30 Dec 2012 9:21 pm |
|
OK guys, finally got them done and loaded into my website.
The BIG Tuning Wrench is the improved version of Carl Williams wrench. When he announced that he was no longer going to make them I approached him about taking it over. He was pleased, to say the least, that I would like to do that.
I've just finished up a run of wrenches in both the standard 3/16" hex and also a 5mm hex for those guitars that have the shorter tuning nuts. The shorter nuts have a tendency to swell slightly as they're threaded onto the rod. There are also some builders that use a 5mm hex nut. The 5mm wrenches should allieviate the problem of a standard 3/16" hex being tight or not going on at all.
I have marked all of my 5mm wrenches with a double groove filled with red paint to differenciate them from the standard 3/16" hex.
This link will take you to my web page where you can order the wrenches.
http://www.psgparts.com/Wrench-Tuning-Pedal-Steel-TL-GEN.htm
I've tried to keep the same price point on the Big Wrench that Carl had.
Thank you all for your continued support.
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/
Last edited by Michael Yahl on 3 Jan 2013 5:53 am; edited 1 time in total |
|
|
 |
Carl Williams
From:
Oklahoma
|
Posted 31 Dec 2012 3:54 am
|
|
| I'm very proud to see Michael's version of the BIG Tuning Wrench and to know I got one of the very first one of these new/improved wrenches for my new Williams Steel! Michael, Happy New Year to you and the Yahl Family and good luck with this new product that you've added to your already super line up of Steel Guitar parts...Carl Williams |
|
|
|
Chris Boyd
From:
Leonia,N.J./Charlestown,R.I.
|
|
|
|
Michael Yahl
From:
Troy, Texas!
|
Posted 1 Jan 2013 11:26 am
|
|
Thanks Carl, I hope I've done ya proud.
You're right Chris, the folks on this forum are a special bunch.
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
Posted 5 Jan 2013 9:48 am
|
|
Kick it!
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
John McClung
From:
Olympia WA, USA
|
Posted 7 Jan 2013 4:08 pm
|
|
Michael, will you have a presence at the SWSGA steel show next week? Love to be able to pick up a wrench or two there.
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
Posted 7 Jan 2013 4:12 pm
|
|
Yes John, I'll have everything there. I'll be in the same spot on the way to the little boy's room.
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
John McClung
From:
Olympia WA, USA
|
Posted 10 Jan 2013 7:14 pm
|
|
Awesome, see you at the show, Michael!
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net |
|
|
|
