G# to F# on LDG??

Dennis Detweiler · From: Solon, Iowa, US

The .020P won't quite make the drop to F# before it starts to raise again. Does this require .018P? or maybe .022P? My guess is .022P. I am putting this question out for another player.
Thanks
Dennis
If I recall, the LDG has helper springs on the raise. Maybe the spring on #6 has to be removed?

[This message was edited by Dennis Detweiler on 29 November 2002 at 03:44 PM.]

Earnest Bovine · From: Los Angeles CA USA

By all means, remove the raise helper spring from the 6th string. With a plain .020 that is an easy raise and it needs no help.

If you still have a problem, try a lower return spring with less tension.

richard burton · From: Britain

.018P will require less movement than .022P. It will be excessively sloppy, though.

Ricky Davis · From: Bertram, Texas USA

Yes, Exactly what Earnest said; I'll have to mirror.
Get those raise springs "OUTTA THERE"!!!
If you have another change on that knee lever....back it off till you get the 6th string figured out...then tune it back up and you may need to find a different finger setting for it.
Have fun.
Ricky

Dennis Detweiler · From: Solon, Iowa, US

Makes logical sense to me. We'll try the raise spring elimination first. I recall having to remove the raise helper on my Zum when I added that change.
Thanks guys
Dennis

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: