| Author |
Topic: Wanted: for Emmons D10 p/p, two drop spring brackets |
Bruce Wandmayer
From:
Sedona, AZ
|
Posted 3 Nov 2012 12:10 am |
|
Hi there,
I need two drop spring brackets for my Emmons D10 p/p. The ones I have are unserviceable.
You know the ones, right? L-shaped brackets screwed into the underside of the body; return spring rods run through one set of holes; lower rods run through the other set.
Not being a machinist, I'm not confident in fabricating them, so if you have a pair or know where I can get them I'd appreciate it.
Thanks a ton,
_________________
Bruce Wandmayer
Sedona, AZ
Steel on the rocks: shakin', not stirred |
|
|
 |
Paul Norman
From:
Washington, North Carolina, USA
|
Posted 3 Nov 2012 8:53 am
|
|
| Call the Emmons guitar co. 336-227-2782. |
|
|
|
Roy Howard
From:
Fort Myers, Florida, USA
|
Posted 3 Nov 2012 6:32 pm D-10 parts
|
|
Contact Jerry Roller here on Forum
_________________
MCI D-10 8 X 4 Peavey Nashville 112 Fender Deluxe Reverb, Fender Jazz Bass, Fender Strat.
Goodrich 120 KORG DTR-1000 |
|
|
|
Chris Lucker
From:
Los Angeles, California USA
|
Posted 4 Nov 2012 3:08 am
|
|
Are they unserviceable because the threads are stripped? or are the newer style with the plain holes?
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars. |
|
|
|
Chris Lucker
From:
Los Angeles, California USA
|
Posted 7 Nov 2012 5:11 pm
|
|
If it is an early push pull, I may have a pair that works. The threaded holes are excellent.
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars. |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 8 Nov 2012 8:06 am Angle Brackets
|
|
Hello Chris,
I spoke with Bruce on the telephone last weekend and I think he's got things resolved by now. His guitar is a later model with 1/4" holes in the brackets.
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
