Aluminum or Wooden Necks?

Steve Frost · From: Scarborough,Maine

I'm slaving away on building my pedal steel guitars, one of them birdseye and the other curly maple. I'm curious about the relative merits of aluminum and wooden necks. Is there any kind of a consistent difference in the sound of the finished guitar? Do some brands of pickups complement one material more than another? This is a pretty open question, and I thought perhaps someone had an opinion

or a recommendation for a S12. Whatta ya know? - Steve

Ricky Davis · From: Bertram, Texas USA

Well I'll tell ya what a very reputable Guy that has been in the pedal steel guitar business for a long time told me.
"Ricky; you can lay Dog Sh!! under the strings for a neck and would'nt make a difference in sound". He then told me why.
"On a pedal steel guitar the strings are vibrating on changer fingers and those fingers are attached by a shaft that is attached to a mounting system that is attached to your guitar and how it's attached and what it's attached to; is the sound of the vibrations that are picked up by the pickups".
I believe every little part of the whole pedal steel has a little something to do with the sound; but that is the main sound of a pedal steel.
I'm a believer in if you have some beautiful wood body and throw a Aluminum neck on there; that just don't match up to me. Now if it is just a formica(kitchen cabinet)covering of the body; than Aluminum would certainly help out in the looks of it

Ricky

Dan Dowd · From: Paducah, KY, R.I.P.

I have been playing steel for more years than I would care to admit. I have also built many stees,a couple with aluminum necks but most with wood necks. I could never tell any color change in the sound from one or the other. I think there is enough metal in our guitars without adding metal necks. Maybe we should change the name from steel guitars to aluminum guitars. Just kidding. Build what ever you like best.

Tom Ward · From: Port Charlotte, FL 33952

Wood!

C Dixon · From: Duluth, GA USA

Wow!!!

With much, much, much respect, I simply must take exception to this.

NO way does a wooden neck EVER sound as bright as an aluminum neck at least, on an Emmons' pedal steel guitar.

If you folks only knew what research and development I am privy to, straight from Ron Lashley himself, you would KNOW that the Emmons' aluminum neck was even designed to make a decided difference in tone from a wooden neck; EVERY thing else being equal.

I had Excel use an aluminum neck on my steel as opposed to his stock wooden neck. There is NO comparison in the tone between the two models. True mine is a wooden body and the others are aluminum bodies. But I do NOT think that is it. I believe with all my heart it is the neck.

If, I am wrong, somebody has a very hard sell when it comes to the original "Sho-Bud" sound, and the "new" Emmons sound (early 60's), that set the world on fire respect PSG's. For all practical purposes, it was the aluminum neck on the Emmons versus the wooden neck on the Sho-Bud that made the drastic difference in their respective sounds.

Sho-Bud even went so far as to go part way and make an aluminum piece surrounding the changer and pick up area on given models. This was done to counter "complaints" from players that it was NOT bright enough. I know this to be a fact. A number of Sho-Buds were retrofitted with this aluminum surround for this very reason. The late Gene O'neal was one of the players who had this done to get a brighter sound.

I am always open for a differences of opinion, but this one... Wow!!

God bless you all,

carl

KEVIN OWENS · From: OLD HICKORY TN USA

I think John Hughey had wood necks on those emmons guitars that he played on the Conway stuff. He had enough highs.
Lloyd Green sounds like Lloyd Green with wood or metal necks.
I think 99.9% of the tone is in the player's hands and mind-you have to know what tone you are looking for before you can find it (does that make sense?). I personally like wood necks.

Kevin

C Dixon · From: Duluth, GA USA

Much of the sound is indeed from the players hands. However that said, The SAME player moving between two guitars equal in every respect, except for wooden versus aluminum necks, WILL sound much brighter on an aluminum neck.

Also, and again agreeing that a lot of the sound comes from the hands, EVEN Buddy Emmons said right on this forum that the reason he did not stay with his Sierra and went back to the Emmons was because he had a sound in his head he could only get on the Emmons. Could that have been due to the fact the Sierra has a wooden neck and the Emmons has an aluminum neck?

So, while a lot of the sound does come from a player's hands, much of it also comes from the particular type of equipment they use.

One other clear example: Jerry Byrd said, NO guitar every built had the sound of a prewar Rick Bakelite.

I believe one does have to acknowledge that a particular type of guitar does in fact often make a decided difference in how even the same player sounds.

carl

Donny Hinson · From: Glen Burnie, Md. U.S.A.

There is a difference...not a whole lot, mind you, but...there is a difference! I think everything on a guitar has a little effect on the sound. Some can hear it, and some can't. Ron Lashley once said that simply putting a screw in the wrong place can ruin the sound of a guitar!

Lee Baucum · From: McAllen, Texas (Extreme South) The Final Frontier

In his interview in Steel Guitar World Magazine, Del Mullen said his wood necked guitars sounded brighter than those with aluminum necks. Go figger.

Lee, from South Texas

Dan Dowd · From: Paducah, KY, R.I.P.

Can someone explain to me how the aluminum neck influnces the raw sound of the guitar. Bill Lawrence to me a couple of years ago that it is a mistake to mount a pickup in a aluminum neck. I didnt comprehend everything Bill was saying, but Im sure he knows what he is talking about. Ha anyone tried different materials for the neck ex; steel carbon for example. I will admit that the Rickenbacker steels sounded different but they were made of all Bakelite. Is there a way of measuring the frequency response and timbre of various mateials for the neck inserts. I personally think how the neck insert is coupled to the guitar body influnces the tone more that the material. Most aluminum necks are a casting and are hollow where mount to the body. Usually a wood is a solid thickness. I guess thats why there are more than one brand of steels.

Jeff Lampert · From: queens, new york city

I can tell you this. When Sho-Bud made their foray into aluminum necks in the mid 70's with the Pro-III model, you could compare the sound to the Pro-II, and they were very different. The Pro-III was thinner and brighter, the Pro-II thicker and mellower. Same company, same year, different sound. If it wasn't the wood vs. aluminum necks, then what could it have been?

Cliff Kane · From: the late great golden state

Interesting discussion! My LDG certainly has a woody tone, or a woody color to the sound. It has a wooden neck on lacquered solid maple. I wonder how formica vs. lacquered solid wood factors into this. My LDG is very resonate (you can feel the wood vibrate with the strings), and I'm sure that this is a factor in its sound. I suspect that if I glued some formica to it, it would lose some of its resonance, and if it were less resonate it might sound brighter, too, as less vibration would be absorbed by the body (perhaps a metal neck does this). This makes me wonder if formica laminated bodies are part of the brighter, "modern" sound, along with metal necks. Any ideas on the mica factor?

Cliff

Ann Fabian · From: Mesquite, Texas, USA

Cliff: Bud Carter has written 2 "Ask Bud!" articles about the 2 topics you raised which may shed more light on the subject for you and others:

"Ask Bud!" INDEX

Check out these 2 articles:

Why do steels with Aluminum necks sound different from those with Wooden necks?
Why are there differences in the sound of lacquered (or painted), wooden bodied guitars and mica (Formica®) covered pedal steel guitars?

Hope that helps!

Ann Fabian
Carter Steel Guitars
617 West Kearney Street
Suite 101
Mesquite, Texas 75149 USA
1-800-969-7332 orders (accessories and steels)
1-972-288-9100 technical info
1-972-288-9169 FAX
www.steelguitar.com
The Steel Guitar Information Resource
www.steelguitarINFO.com
OnLine Steel Guitarists Directory
www.OnLineSteelers.com

[This message was edited by Ann Fabian on 10 December 2000 at 10:56 AM.]

Donny Hinson · From: Glen Burnie, Md. U.S.A.

As David said, we need a scientific study to put the debate to a rest. I suppose someone who had access to spectrum analyzer scope, and a guitar builder could make a very detailed anaylsis of the overtones with each type of neck. They would, of course, have to use a guitar that is available with either type of neck, and then just swap the necks for each test.

It would be interesting, indeed!

Jon Light · From: Saugerties, NY

I was told by a steel builder that much R&D has been done even with different mica adhesives. I would have been sceptical that this would be a significant sound factor except that this was a builder with much better things to be doing than screwing around with mica goo if he had a choice. But he was that committed to the premise different sonic properties of different adhesives.
If the instrument is sensitive to that, then there's no surprise that it would be sensitive to larger factors like mica/nekkid, wood/aluminum.

Cliff Kane · From: the late great golden state

Ann: thanks for those links! Once again, you folks got lots of great info! Bud says that there is a difference in sound between mica and laquered wood guitars, but he doesn't classify the tone of either. I don't know as there are so many factors at play when I hear a PSG, and I've only had experience with my LDG. Is there a general difference between mica and laquered wood, such as the bright vs. mellow or Sho-Bud vs. Emmons tone perceptions that folks place on wood and aluminum necks, or is it more variable?

Thanks, and happy holidays y'all!

[This message was edited by Cliff Kane on 10 December 2000 at 12:17 PM.]

Moon in Alaska · From: Kasilof, Alaska * R.I.P.

It has been my experience that all the modern guitars are MUCH more lively. There seems to be a heck of a lot more bar noise when you run the bar up and down the strings with out muting. I also find greatly increased sustain !! My Carter with an alum neck has a heck of a lot more sustain, as measured by strumming the strings with no amp, and feeling and hearing how long that vibration last. I have no idea if the alum neck makes the difference, or some of the difference !! I feel comfortable playing my old Fender-400 which I think has a very good sound, but does not sustain nearly as long as the Carter. I can get all the sustain I need with the volume pedal, so that difference don't matter much with me. But, running the bar up and down the strings, requires a little more muting on the alum neck Carter. Does the alum make a difference ? I have no idea but will say if Bud Carter put it on there, I would think it does !!

------------------
<< Moon Mullin in Alaska >>
==Carter S-10==
<< Old Fender-400 >>
== Evans FET 500 Custom LV ==
Click HERE for Moon's Home Page

Ricky Davis · From: Bertram, Texas USA

Each and every guitar metioned here has a different changer in it from one to the other. That is what the strings vibrate on and that is what is mounted in what ever guitar you have.
To clarify more. You can have a ShoBud proll and a ShoBud prolll and they will sound different Not because of wood vs. metal neck; but because they are different Changers.
Ok one more time. The strings vibrate on changer fingers and the pickup picks up the sound of that vibration and is amplified through your amplifier. What that changer is and what the changer is mounted to>distigishes the true sound of that particular "pedal steel" guitar.
Ricky

------------------
Ricky Davis

My Homepage
Rebel™ and Ricky's Audio Clips
www.mightyfinemusic.com
Email Ricky: sshawaiian@aol.com

Robert · From: Chicago

And now to muddle things further: density and resonance of woods can vary within even a single tree, not to mention varieties of trees, e.g., maple, mahogany, walnut, etc. So one could feasibly have a wood-necked instrument that sounded AS bright, if not brighter than an aluminum neck.

Happy Holidays,

Rob

Lee Baucum · From: McAllen, Texas (Extreme South) The Final Frontier

Here is what baffles me. On most pedal steel guitars, the neck is just attached to the body. The roller nut straddles the neck, but doesn't touch it. The changer is attached to the body, but doesn't touch the neck. I have a tough time believing that the neck material makes any difference. Different weights and densities could make a difference, I suppose, just by making the body more rigid.

I think this would be easier to buy if the changer and the nut were attached to the neck.

Of course, I'm just a banker, not an engineer. What do I know?

Lee, from South Texas

Dan Dowd · From: Paducah, KY, R.I.P.

Does anyone remember the fender Tripple necks with 3 legs and the Stringmasters. In my opinon they were the brightest sounding guitars ever built. No aluminum necks and if it was a bright sound you wanted you had it. I think a lot of the tone is in the pickups. The fender's pickups were wound with a lot less wire than the Sho-Bud or Emmons. Im still not convienced the aluminum necks change the sound that much and if they do or don't the player could tweak his amp to compensate for it one way or the other. I'll stick with wood necks.

David Biagini · From: San Jose, CA, USA

What Ricky said. The type of changer contributes most to the tone of the guitar followed by the wood and whether it is lacquer or mica, and then the pickups.

Steve Feldman · From: Central MA USA

Sage · From: Boulder, Colorado

This is a large animal. IMO it breaks down into a)how the string energy is transferred into the instrument, b)the resonance of the instrument itself, and c)the coloration of the pickup and amplifier. That is just the instrument side, I still think that the player contributes the most to making a beautiful tone. Regarding a)above, the changer/nut mounting designs and tuner mounting and design are critical, but only some fraction (1/3?) of the whole. Likewise the resonance of the cabinet contributes. Monks used to hoard the secret of glue and finish) formulas for the best instrument makers because it made such a difference in the sound (and we're still into construction adhesive and formica??!). Wood vs. Alumiunum necks factor in here in a proportional way depending on how they are mounted and how much responsibility they have for carrying string energy vs. being just additions to the overall resonance of the cabinet. The final color comes from the pickup, and then the amp. It is helpful for myself to break it down this way, otherwise it is too easy to get lost when pondering these very intricate relationships.

KENNY KRUPNICK · From: Columbus, Ohio

I like both,have both,but Aluminum necks is my favorite way to go.

Forum Index > Pedal Steel	Goto page 1, 2, 3 Next	Next oldest topic :: Next newest topic