Locking tuners

Olli Haavisto · From: Jarvenpaa,Finland

Is anybody using locking tuners on their pedal steels?
After several years of stringing only keyless guitars it seems stupid to put up with the hassle of slippage etc on a guitar with normal keys... I think I`d only need them for the plain strings though....
My guitar has Sperzels, something that could be just dropped in would be ideal.
Any ideas,

Thanks,

Olli
_________________
Olli Haavisto
Finland

Jerry Overstreet · From: Louisville Ky

http://bb.steelguitarforum.com/viewtopic.php?t=227642&highlight=locking+tuners

Recent thread here. Maybe there's some helpful info there.
_________________
proud appalachian american
those of you who think you know everything annoy the he!! out of those of us that do. Winking

never argue with stupid people, they will drag you down to their level then beat you with experience-Mark Twain-

Olli Haavisto · From: Jarvenpaa,Finland

Thanks Jerry, I`ll contact Sperzel !
_________________
Olli Haavisto
Finland

Brent Torgrimson · From: Austin, Texas, USA

That's a very good question - why don't steels have locking tuners on them? I think the reason is "because that's the way it's always been done." But, locking tuners are the way to go. I have them on all my 6-string guitars and would've bought them eons ago if I'd known how much time & hassle they save. I checked with my steel manufacturer & they said locking tuners would not fit, but I may attempt it somehow anyway. Good topic.

Storm Rosson · From: Silver City, NM. USA

Yes, I have a set of Grover roto locks on my old Beck and on a project guitar I'm working on and they are great so far. 18:1 ratio is nice and the locking part makes changing strings nearly painless. I don't know why any current builders aren't using lockers of some make as standard issue already.As far as fit ,they are perfectly able to fit any head that takes a standard ,full size Grover Rotomatic. Only diff I found is the tuning post on the lockers is .01" shorter so imo that's relatively negligable Smile

Jack Wilson · From: Marshfield, MO

I put a set of locking Sperzels on a S-10 Excel several years ago. Everytime I pushed the pedals, the 3rd string broke. After about 3 broken 3rd strings, I took them off and put the original tuners back on.

David Nugent · From: Gum Spring, Va.

I have them on my Emmons SKH SD-10, and despite the limited space available (tuners are closer together than on most guitars), have no problem turning the locking wheels. Would not hesitate to install them on most any guitar.

Storm Rosson · From: Silver City, NM. USA

Bo Legg · Posted 25 Aug 2012 9:00 am

My Lock tuning keyed American Strat is a joke. It takes 10 times as long to tune and I haven't found it to be any better than a good set of plain tuning keys.

John Billings · From: Ohio, USA

"It takes 10 times as long to tune "

I don't see how that is even possible, Bo! I have Sperzels on a few of my six stringers, and it takes far less than half the time to put on a string. Stick the string thru the post, turn the locking wheel, and tune up to pitch, one wind, stretch the string (I use my old Fender string-stretcher) re-tune, and you're done. And, it stays in tune much mo better.

Stormy,
I agree. There must have been a burr or a sharp edge,,,,maybe doing an extra wind or two would have helped. But,,,, I have always used them on my B/G bender guitars, because of the vastly improved tuning stability, and I've never had a string break at the post. Never! And I go nutz with those benders!

Lane Gray · From: Topeka, KS

I find that with somewhere around 6 winds on plain strings (down to around 4 on wounds under .040), slippage is a nonissue on my Zum.
Live Steels on E9 and SIT on C6, and I've only had to tune 3 strings in the last 4 weeks of playing it every Sunday (and casing it for the drive back home) and keeping it in the garage while I'm gone.
That said, the locking Sperzels look good
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects

Bo Legg · Posted 25 Aug 2012 4:37 pm

Am I talking about the same thing . Picture below
Surely you're not implying you can tune up, lock and not have to tune for days
Let me tell you how it goes with me.
I unlock it tune the string and then relock it and it's sharp so I unlock it tune it flat and lock it and it's a little flat or a little sharp so I unlock it and try the whole process over again and again till when I lock it it's in tune. After you do this on 6 strings 10 times as long tuning is being optimistic.
Then with bending some strings, beating on it and temp change I have to go through this process again to get in back in tune. Thank God I have other guitars and I can leave that baby home where it belongs.

Lane Gray · From: Topeka, KS

Actually, I left a sentence out: I meant on a stock Zum, I don't have a slipping problem.
I play every Sunday: when I check my tuning, only one or two strings out of twenty need adjusting. The guitar is rock solid.
The locking tuners look good just from the simplicity point, I don't think it'd improve on what Bruce used in late 1990
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects

Olli Haavisto · From: Jarvenpaa,Finland

Now I`m confused...
I thought the locking tuners just lock the string in place and you can still tune the guitar like a normal tuner ??
_________________
Olli Haavisto
Finland

Lane Gray · From: Topeka, KS

Yes, Olli. But many think detuning is due to string slippage
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects

Olli Haavisto · From: Jarvenpaa,Finland

No problem with slippage once the string is settled. I just want string changing to be as fast and reliable as on a keyless.
What Bo describes sounds more like a locking nut which has to be unlocked to use the tuners...
With locking tuners you don`t have to unlock anything until you change strings, right??
_________________
Olli Haavisto
Finland

Bent Romnes · From: London,Ontario, Canada

Olli, I never got straight answers as to locking tuners on steel. I put regular Sperzels on my BenRom steels which in fact was what Roger at Sperzel recommended. I find it very fast to change/install strings using my trusty old sidewinder.
_________________
BenRom Pedal Steel Guitars
https://www.facebook.com/groups/212050572323614/

Lane Gray · From: Topeka, KS

From reading the Sperzel website, your understanding of how they work is right.
I'm with Bent, regular tuners ain't that time consuming.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects

Olli Haavisto · From: Jarvenpaa,Finland

I`m spoiled by six years of keyless. And that is way faster....
_________________
Olli Haavisto
Finland

Bent Romnes · From: London,Ontario, Canada

hehe yep got it Olli. You're just a spoiled brat Winking

Seriously though..changing strings the regular way on steel can be a challenge since normally one has to make sure that the string doesn't slip out of its anchoring on the changer end while you are trying to line up things at the keyhead end. I partly eliminated this problem by drilling a hole thru the changer finger and sticking the string thru - and forget that end til it's time to center the string on the finger after semi-tightening the tuner.

So far, this seems to work fine - no abnormal string breaking etc.

Hope Ben will read this and chime in...I think he changed one string since getting the guitar in May.

_________________
BenRom Pedal Steel Guitars
https://www.facebook.com/groups/212050572323614/

John Billings · From: Ohio, USA

Bo! What kind of tuners are those? With Sperzels, you don't have to unlock it to tune. Put in the string, lock it and tune. You don't ever unlock it again, except when you go to put on a new string. And yes, I stay in tune for a long time! Using the string stretcher eliminates the "settling in " time completely. The only time I have to touch up the tuning is due to the string wearing out, or for atmospheric and heat issues. Same on my Kline. If I have to tune the 3rd or 4th string more than twice in a 5 hour gig, I know it's time for a new string!

Bo Legg · Posted 26 Aug 2012 1:57 pm

Stuart Legg · Posted 26 Aug 2012 2:26 pm

Don't feel bad Bo. It's not your falt they never mentioned that in Guitar for Dummies.

Olli Haavisto · From: Jarvenpaa,Finland

_________________
Olli Haavisto
Finland

John Billings · From: Ohio, USA

BWAAAAAA! Yo Bo, befo yo tunes!

Forum Index > Pedal Steel	Goto page 1, 2 Next	Next oldest topic :: Next newest topic