Author |
Topic: Goodrich Pedal Question |
Niels Andrews
From: Salinas, California, USA
|
Posted 2 Aug 2012 2:22 pm
|
|
I have a goodrich pedal that has no markings as to input or output. There are three jacks. I am thinking the forward one is tuner the middle input and the rear one out put or to say it another way the middle is input and the other two output. _________________ Die with Memories. Not Dreams.
Good Stuff like Zum S-12, Wolfe Resoport
MSA SS-12, Telonics Combo. |
|
|
![](templates/respond/images/spacer.gif) |
David Nugent
From: Gum Spring, Va.
|
Posted 2 Aug 2012 3:32 pm
|
|
If that is a standard Goodrich, first jack (closest to front) is input, other two both output jacks (neither being a designated tuner output). |
|
|
![](templates/respond/images/spacer.gif) |
CrowBear Schmitt
From: Ariege, - PairO'knees, - France
|
Posted 2 Aug 2012 11:06 pm
|
|
Correct David ![Mr. Green](images/smiles/icon_mrgreen.gif) |
|
|
![](templates/respond/images/spacer.gif) |
Michael Hummel
From: Ottawa, Ontario, Canada
|
Posted 3 Aug 2012 1:42 pm
|
|
I always have trouble with "front" -- is that front from me, or to me?
The way I remember is that at least on my Goodrich, two of the jacks are slightly closer together, and these are the outputs. Doesn't matter which one goes to tuner or amp. Obviously the other one is the input.
Mike _________________ MSA Classic 5+4
Too many 6-strings and amps to list |
|
|
![](templates/respond/images/spacer.gif) |
Mike Wheeler
From: Delaware, Ohio, USA
|
Posted 3 Aug 2012 6:41 pm
|
|
The input jack is farthest from you...closest to the pedal bar....closest to the audience. ![Smile](images/smiles/icon_smile.gif) _________________ Best regards,
Mike |
|
|
![](templates/respond/images/spacer.gif) |
David Nugent
From: Gum Spring, Va.
|
Posted 4 Aug 2012 4:53 am
|
|
My apologies for any confusion my original post may have created. I have always assumed that the front of the pedal was where the 'Goodrich' logo was located. |
|
|
![](templates/respond/images/spacer.gif) |
Len Amaral
From: Rehoboth,MA 02769
|
Posted 4 Aug 2012 6:54 am
|
|
David is correct. Also, if you connect a tuner to the second output on the VP it may
color the sound of the signal going to your amp. I also don't like a tuner in line going to the amp unless it is true btpass.
Lenny |
|
|
![](templates/respond/images/spacer.gif) |