| Author |
Topic: Help needed - sho bud brass collar? |
Dag Wolf
From:
Bergen, Norway
|
Posted 26 Aug 2002 6:46 am |
|
Can somebody tell me what size the allen wrench for the little set screw on the Sho Bud brass collar are?
Thanks,
Dag |
|
|
 |
Glenn Austin
From:
Montreal, Canada
|
Posted 26 Aug 2002 7:36 am
|
|
| 1/16" I believe |
|
|
|
Joerg Hennig
From:
Bavaria, Germany
|
Posted 26 Aug 2002 11:44 am
|
|
| What exactly do you mean by "brass collar"? The disc where the pull rod is attached? If so, then it´s 5/64" |
|
|
|
Dag Wolf
From:
Bergen, Norway
|
Posted 26 Aug 2002 11:56 am
|
|
I`m restoring a ShoBud Professional with the rack and barrel system. The set screw on the collar/bareel which are located on the pullrod close to the cross shaft are smaller than 5/64.
Looks more like 1/16 or 3/64.
Can I get a confirmation on Glenn`s suggest?
I`m not that familar with inch measurements - we use only metric over here.
Thanks,
Dag[This message was edited by Dag Wolf on 26 August 2002 at 12:57 PM.] [This message was edited by Dag Wolf on 26 August 2002 at 12:57 PM.] |
|
|
|
Jim Smith
From:
Midlothian, TX, USA
|
Posted 26 Aug 2002 12:00 pm
|
|
| 1/16" is what I remember too. |
|
|
|
Doug Seymour
From:
Jamestown NY USA (deceased)
|
Posted 26 Aug 2002 12:02 pm
|
|
| I'd say the guys are right....I've got a few of those & nothing to put them on if you need any?? Guess they're from my old cross-over days! Baldwin/ShoBud that is! |
|
|
|
Dag Wolf
From:
Bergen, Norway
|
Posted 26 Aug 2002 1:45 pm
|
|
Doug, thank you for the offer. I have sent you an e-mail.
Thanks guys,
Dag |
|
|
|
Dave Seddon
From:
Leicester, England.
|
Posted 27 Aug 2002 10:26 am
|
|
Dag
I have just bought a "Professional", and I re-drilled and tapped all the barrels 4mm and use 4mmx4mm grub screws. Even in this so called Imperial country of ours it is getting inpossible to buy anything "Imperial."
Dave |
|
|
|
