need help flocking

Wayne Brown · From: Bassano, Alberta, Canada

can anybody explain to me how to flock a guitar...i'd like to know how it's done is it a coating that you can spray on or what where can i buy it
thanks
wayne

Bill Ford · From: Graniteville SC Aiken

Wayne,
Try this site,also when you need to find something click on search on top of page and type in search word.I typed flocking and got the bottom http.
Hope this helps
www.donjer.com.
http://steelguitarforum.com/cgi-bin/search.cgi

Bill Ford

------------------

Bill Ford · From: Graniteville SC Aiken

Wayne,
Here is a direct link to the vender.
Complete kits starting at $19.95
http://www.donjer.com./suedetex/product.htm

Bill

------------------

George Kimery · From: Limestone, TN, USA

Many years ago, there was a company and/or process called Velva-Glow where you could take virtually anything to them and they would flock it with a beautiful nylon flocking that was electro-statically charged to make it stand up properly. There was some sort of epoxy colored glue that was sprayed on first, then the fibers. It was a wonderful process. You might do a search on the web or ask around if you are interested in having somebody else do it. I have personally done flocking with the bags of flock and the spray gun that looks like an old fashioned fly sprayer. I later got a special gun that runs off an air compressor, which was much better. Results were not up to my standards. It looked OK, but that was it, just OK. Plus, it was a mess to clean up all the loose fibers. We had a large cardboard box that we sprayed into to keep the fibers in one place and to be able to collect the oversprayed ones and reuse them. We were spraying black, so we just coated the plywood with flat black enamel and sprayed the flocking on while the paint was wet. I have a number of woodworking catalogs that still have the equipment in it if you don't find it elsewhere, let me know and I will dig up the info. for you.

Wayne Brown · From: Bassano, Alberta, Canada

thanks bill and george
wayne

[This message was edited by Wayne Brown on 13 June 2002 at 07:26 PM.]

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: